-80x80w.png)
-80x80w.png)
-80x80w.png)
Brand: Haisley Machine
Part Number: FT120/6.7NEW
07.5+ Dodge 6.7L Cummins Diesel New .120 High Flow Fuel Connector TubesIncludes new o-rings.Recommended if you have a modified or dual cp3 setup.PLEASE ALLOW 1-3 DAYS FOR SHIPMENT, WE BUILD THESE ON DEMAND.Part Number: FT120/6.7NEW..
$350.00
-10 %
Brand: Full Send Diesel
Part Number: FSD-9820CU-FASS-INTLKT
This is Full Send Diesel's 1998.5+ Dodge Cummins FASS Fuel System/ SUMP DIY Install Kit. This Kit includes everything you need to plumb you fuel system with AN fittings and hose when installing your FASS fuel system and Beans Diesel Dual Port Sump if you choose to do so. The rubber hoses that come w..
$299.99 $333.99
New
-45 %
Brand: Alliant Power
Part Number: AP0083
The Alliant AP0083 Injector Brush Kit is a must have item in the toolbox of any 2003-2015 Dodge 5.9L & 6.7L Cummins technician. The Alliant Injector Brush Kit provides you with all the proper tools you need to clean the injector bore and seat while installing new injectors in an engine. Fea..
$54.26 $98.85
New
-31 %
Brand: DTech
Part Number: DT670013
The Dtech Injection Lines are quality replacements for factory injector lines on your 2007.5-2018 6.7 Cummins. This line is direct fit and requires no modifications for installation. DTech has been a leading supplier of diesel injection parts and equipment for over 60 years! The fuel line is constru..
$52.69 $75.89
New
-38 %
Brand: DTech
Part Number: DT67001
Replace the contaminated or damaged fuel line on your 2007.5-2018 Dodge 6.7 Cummins with the DTech DT670010 Pump To Rail Fuel Injection Line. Dtech Fuel Lines are a direct-fit replacement and do not require any additional modifications for installation. DTech has been a leading supplier of diesel in..
$55.77 $89.99
New
-28 %
Brand: DTech
Part Number: DT670011
The Dtech DT670011 Fuel Injection Line for Cylinder 1 is a perfect replacement for factory lines. The line is direct-fit and requires no modifications for installation. DTech has been a leading supplier of diesel injection parts and equipment for over 60 years! The fuel line is constructed from..
$52.69 $72.69
New
-30 %
Brand: DTech
Part Number: DT670012
Replace the Factory Fuel Line on your 2007.5-2018 Dodge 6.7 Cummins with this DTech DT670012 Fuel Injection Line for Cylinders 2 and 4. This line is direct fit and requires no modifications for installation. DTech has been a leading supplier of diesel injection parts and equipment for over..
$52.69 $75.81
New
-33 %
Brand: DTech
Part Number: DT670014
Fix your cylinder 6 Injection line with this high quality replacement for your factory line from DTech, Dtech Fuel Lines feature a direct-fit design with no modifications needed for installation. DTech has been a leading supplier of diesel injection parts and equipment for over 60 years! The fu..
$52.69 $78.58
Brand: Cummins
Part Number: 0445226126
Replacement Bosch OEM fuel rail for '13-'18, 6.7L Dodge Cummins. Includes rail pressure sensor and fuel pressure limiting valve.This is the same rail that you'd get from Cummins or your Mopar dealer. Bosch is the OEM manufacturer. Part Number: 0445226126Replaces:Cummins: 5295117Chrysler: 6..
$304.95
Brand: Cummins
Part Number: 5295117
Replacement Cummins OEM fuel rail for '13-'18, 6.7L Dodge Cummins. Includes rail pressure sensor and fuel pressure limiting valve. Part Number: 5295117..
$775.00
Hot
Brand: Keating Machine
Part Number: 020415-1
Cummins 12 valve and 24 valve lift pump block off plate. Covers the hole on 89-98 12 Valves that would normally have a lift pump bolted into it. Allows you to eliminate the lift pump bracket on 98.5-02 24 Valve Cummins trucks.03-18 trucks, this blocks off the ccv breather drainback port.
O-ring ..
$19.95
-5 %
Brand: Fleece Performance
Part Number: FPE-CUMM-CP3-10MM-6.7
The Fleece Performance Cummins PowerFlo 750 CP3 is a straight forward, no inflated numbers, CP3 upgrade proven to support 750 RWHP with the proper complimenting modifications. Not only will it support 750 RWHP, but it also eliminates the factory fuel flow restriction that begins at 3,000 RPM. If you..
$1,895.00 $1,989.75
-23 %
Brand: Tork Teknology
Part Number: HF12MMBB
HIGH PERFORMANCE - HIGH FLOW
BULLET PROOF
12MM X 1.5 BANJO BOLT with a pair of sealing washers.
We search the diesel forums looking for problems that could be solved with a new product. One complaint that caught our attention is the poor quality of high flow banjo bolts on the market. Guys are s..
$9.95 $12.95
-10 %
Brand: AirDog by PureFlow Technologies
Part Number: A6SABD426
AirDog® II-4G
The next generation in the fuel delivery system.
The AirDog 2-4G A6SABD426 Air/Fuel Separation System for your 2005-2016 Dodge 5.9L & 6.7L Cummins Diesel is the next generation Airdog fuel delivery system, resulting in an efficient, long lasting and quiet lift pump. The compact AirDo..
$765.00 $849.00
-5 %
Brand: Fleece Performance
Part Number: FPE-FFD-RO-4G
Upgrade your fuel system with this fuel filter delete from Fleece Performance Engineering. If you have an aftermarket fuel filtration system such as an Air Dog or a FASS, your factory fuel filter is no longer necessary. The factory fuel filter only becomes an extra restriction and an eye sore. This ..
$59.95 $62.95
Brand: Cummins
Part Number: 3937142
Copper Injector sealing washer for the 2003 to 2018 5.9L & 6.7L Cummins.
Aprox:
Diameter: 15.0mm
Thickness: 1.50mm
Item 29 in picture only. (Second picture)
Cummins part number: 3937142 (or 3976371)
Washer may differ slightly from image...
$3.00
Brand: G&R Diesel
Part Number: GRD0015X
When installing a bottom sump with your AirDog or Fass Pump most trucks end up with an open fuel supply and or return line. G & R Diesel's 1/2" or 3/8" aluminum plug will cap off these lines with ease, to keep fuel from seeping out of them and dirt from getting into your fuel tank. You no longer hav..
$15.99
-21 %
Brand: Cummins
Part Number: 6x 2872288
6.7L Bosch Connector Tube Set
Includes:6 ea. New Bosch 6.7L Connector Tubes
Cummins part number: 2872288, replaces part number 2872395Replaces Mopar- 5175565ACBosch: F00RJ01831..
$322.95 $409.00
Brand: Bosch
Part Number: F00RC00647
2007.5-2018 Dodge Ram 6.7L Cummins Diesel Bosch Connector Tube Also known as high pressure crossover tube. We recommend replacing these if you are installing new injectors.
Includes:1 injector tube with o-ring6 needed per engine. Bosch: F00RC00647Replaces:Cummins part number: 2872395, 2872393, 287..
$49.49
New
-5 %
Brand: Dynomite Diesel
Part Number: DDP 67CON-MOD
Dodge 07.5-18 6.7L: Brand New set of OEM connector tubes that have been modified for added fuel delivery to the injector. Intended for applications 900 RWHP and greater.Includes new O-rings. Not recommended for street use.Details:Liter: 6.7Engine: CumminsYears: 2007.5-2018Fuel Type: DieselCondition:..
$627.00 $660.00
Brand: Bosch
Part Number: F00RJ00437
Also called a connector tube or crossover tube nut. This is for a single (1) nut, 6 are needed.Genuine OE Bosch
Bosch Part number: F00RJ00437Replaces:Cummins: 3946625, 4893739, 5264181Mopar: 5086866AB..
$5.79
Brand: Exergy Performance
Part Number: E04-20x05
The Sportsman Pump starts out life as a brand new, 6.7L Cummins-based Bosch CP3 (this means no core pump is required on your part). Exergy then outfits it with the appropriate upgrades to support 650-rwhp. The key benefit to the Sportsman CP3 is its ability to flow at higher engine speeds—up to 4,50..
$1,150.00
Brand: XDP Diesel
Part Number: XD125
The XDP Race Fuel Valve prevents fuel from being returned to the tank when the pressure release valve is opened due to fuel rail pressure increases. Many high performance electronic tuning devices raise the fuel rail pressure resulting in P0087 & P1011 codes on Cummins engines and P1093 codes on Dur..
$30.95
-10 %
Brand: AirDog by PureFlow Technologies
Part Number: A6SABD029
AirDog® II-4G
The next generation in the fuel delivery system.
The AirDog 2-4G A6SABD029 Air/Fuel Separation System for your 2005-2016 Dodge 5.9L & 6.7L Cummins Diesel is the next generation Airdog fuel delivery system, resulting in an efficient, long lasting and quiet lift pump. The compact AirDo..
$795.00 $879.00
Brand: Cummins
Part Number: 4935974
Cummins OE replacement fuel injector line. Fits 2007.5-2015 6.7L Cummins Diesels.
Line number 4(four) or 5(five) only.
Cummins part number: 4935974..
$67.00
-5 %
Brand: Fleece Performance
Part Number: FPE-FC-1316
Replace your plastic OEM fuel cap (or non-existent cap) with this stylish billet anodized fuel cap. It comes with a double o-ring seal to ensure a tight fit and keep contaminants out of your fuel tank. It also has an integrated neodymium magnet to allow you to attach it to your fuel door while you p..
$37.14 $39.00
-8 %
Brand: AirDog by PureFlow Technologies
Part Number: A4SPBD005
This kit works on 05-2016 Dodge 5.9L & 6.7L Cummins trucks with the in-tank lift pump. It includes a fuel suction tube kit.Flows 150GPH! 15-17PSI Fuel Pressure.
PureFlow AirDog® manufactures and supplies AirDog® Fuel Air Separation Systems and high performance lift pumps for diesel pick-up trucks.A..
$645.00 $699.00
-5 %
Brand: FASS by Diesel Performance Products
Part Number: TS D07 250G
Flows 250GPH @ 15-17PSIThis pump replaces the stock lift pump.Fits 2005-2018 Dodge 4x4 5.9L & 6.7L Commonrail Cummins Diesel Trucks.
The Titanium Series uses the same blueprint as our HD Series just in a smaller package. It is designed for the pickup while utilizing all the best features of the HD ..
$825.55 $869.00
Brand: Cummins
Part Number: 4935976
Cummins OE replacement fuel injector line. Fits 2007.5-2015 6.7L Cummins Diesels.
Line number 6(six) only.
Cummins part number: 4935976..
$65.00
-13 %
Brand: Cummins
Part Number: 4932790 x3
Set of 3 Fuel Control Actuator FCA Screws
Fits 03+ 5.9L/6.7L Cummins
Cummins part number: 4932790..
$13.00 $15.00
Brand: Cummins
Part Number: 4935982
Cummins OE replacement fuel injector line. Fits 2007.5-2015 6.7L Cummins Diesels.
Line number 2(two) or 3(three) only.
Cummins part number: 4935982..
$70.00
-12 %
Brand: H&S Motorsports
Part Number: 213002
Fits all 2007 - 2016 Dodge Ram 6.7L Cummins Pickup AND Cab & ChassisAlso fits 04.5-2010 GM 6.6L Duramax Diesel trucks (instructions not included for this application)The OEM fuel pressure relief valve is designed to relieve pressure once the fuel rail gets above 27,000 psi. Some aftermarket tuning o..
$15.00 $17.00
Brand: Cummins
Part Number: 4935981
Cummins OE replacement fuel injector line. Fits 2007.5-2015 6.7L Cummins Diesels.
Line number 1(one) only.
Cummins part number: 4935981..
$65.00
Brand: Exergy Performance
Part Number: E04-20x06
Exergy Performance 10CP3 10mm Stroker Modified CP3 Fuel Injection Pump If you are looking for the most aggressive flowing single CP3 pump on the planet than the Exergys line of stroker CP3 pumps are for you. Exergy's 10mm stroker CP3 pump will flow more fuel volume than any other CP3 pump currently ..
$2,000.00
-250x250.png "13-18 Ram 6.7L Cummins Water Separator on Framerail")
-45 %
Brand: Fleetguard
Part Number: FS20089
This duel state diesel fuel filter cartridge is approved for use on 2013-2018 model Dodge Ram Trucks Cummins 6.7.
Fleetguard part number: FS20089..
$60.04 $108.27
-9 %
Brand: AirDog by PureFlow Technologies
Part Number: A6SPBD254
AirDog® II-4G
The next generation in the fuel delivery system.
The AirDog 2-4G A6SPBD254 Air/Fuel Separation System for your 2005-2016 Dodge 5.9L & 6.7L Cummins Diesel is the next generation Airdog fuel delivery system, resulting in an efficient, long lasting and quiet lift pump. The compact AirDo..
$724.00 $799.00
Brand: FASS by Diesel Performance Products
Part Number: TS D07 165G
The Titanium Signature Series diesel fuel lift pump was engineered by FASS Fuel Systems to be the top performing, longest lasting and most reliable aftermarket filtration system in the diesel industry. Rated at 165 gallons per hour and backed by a limited lifetime warranty this Titanium Signature Se..
$739.00
-5 %
Brand: Fleece Performance
Part Number: FPE-34562
Upgrade the lift pump in your 2011-2018 Dodge 6.7L Cummins with the Fleece FPE-34562 PowerFlo Lift Pump. Say goodbye to noisy lift pumps, cutting holes in your fuel tank, and quarter tank issues. Fleece's PowerFlo Lift Pump gives you a drop-in alternative to the current frame-mounted lift pumps on t..
$699.00 $733.85
-16 %
Brand: Industrial Injection
Part Number: 131602
New machined pump wheel for our Dual CP3 Kit. Available for both Dodge & GM models.
Part Number: 131602..
$132.00 $158.00
-4 %
Brand: Industrial Injection
Part Number: 236401
Industrial Injection CP3 Stg. 1 BOP (Bag of Parts) kit for 2007.5-2016 Dodge 6.7L Cummins
The stage 1 For the 6.7 Cummins, "Do it yourself" kit is good for 15% more volume. The kit is built with new components and are modified using the EDM process. This kit can be installed without removing the CP..
$453.00 $474.00
-5 %
Brand: Fleece Performance
Part Number: FPE-DPK-67
2010+ 6.7L Cummins Dual Pump Kit!Get the fuel your 2010-2016 6.7L Cummins needs with our Dual Pump Kit! This kit is designed to fit perfectly, and comes with everything you need to get the job done right the first time. This kit is not only a simple and clean install, it also eliminates the need for..
$780.00 $819.00
-5 %
Brand: Fleece Performance
Part Number: FPE-CUMM-CP3K-6.7
The Fleece Performance CP3K is a modified Cummins CP3 designed to eliminate the factory fuel flow restriction that begins at 3,000 RPM. If you have a stock CP3 pump you are losing fuel flow and rail pressure after 3000 RPM, which correlates to lost horsepower when you need it most. This cost effecti..
$1,179.00 $1,237.95
-1 %
Brand: DTech
Part Number: 670004
The DTech DT670004 Injector Connector Tube for your 2007.5-2013 Dodge 6.7L Cummins is a direct replacement for your factory Connector Tube. Often known as supply tubes, high-pressure connectors, connecting tubes, or feed tubes, these are responsible for feeding your injectors with fuel. It's reco..
$27.46 $27.78
-20 %
Brand: Pure Diesel Power
Part Number: PDPHF12MM
PDP High-Flow 12mm x 1.5 Banjo Bolt for the 98.5+ Cummins Diesel Engines
Features:
Higher flow than stock
CNC machined billet aluminum (stronger)
Includes (2) banjo washer seals
Part Number: PDPHF12MM...
$7.95 $9.95
-5 %
Brand: Fleece Performance
Part Number: FPE-FFD-RF-4G
Upgrade your fuel system with this fuel distribution block from Fleece Performance Engineering. If you have an aftermarket fuel filtration system such as an Air Dog® or a FASS® and dual CP3 pumps, this fuel distribution block will allow you to get rid of your unnecessary factory fuel filter and give..
$166.66 $174.99
Brand: Big Bang Injection
Part Number: MY07-S1.5
Stage1.5nozzle flow rate of 96l/h/100bar --> 45% increase compared to stockThese injectors are capable of up to 900rwhp. While it is considered a race injector, they will perform superbly in a daily driven work truck with no disadvantages. True to our tradition we are building these injectors by han..
$3,895.00
Brand: Haisley Machine
Part Number: FT120/6.7
07.5+ Dodge 6.7L Cummins Diesel Reman .120 High Flow Fuel Connector Tubes
Includes new o-rings.
Recommended if you have a modified or dual cp3 setup.
$200.00 Core Charge to be refunded upon receipt of your stock connector tubes.Customer is responsible for return freight of connector tubes.
PLEA..
$150.00
-13 %
Brand: LongHorn Fab Shop
Part Number: 201050
One of the most critical parts of your truck is it's fuel system! Do not just let your FASS or AirDog hang down from your frame and be exposed to road, tire, and field hazards! We have created a completely new mounting system for your FASS or AirDog that compliments an already great fuel system.
..
$173.67 $199.99