ATS Fuel Rail Pressure PlugFitment: 2003-07 Dodge 5.9L CRA common failure of the Ram 5.9L Common Rail Cummins is the pressure relief valve. These relief valves are a basic spring, designed to relieve pressure as it exceeds a specific predetermined pressure. As pressure is continually applied to this..
The XDP OER Series New Fuel Rail Assembly XD600 will replace the contaminated fuel rail in your 2003-2007 Dodge 5.9L Diesel. Like all XDP OER Series products, this fuel rail is built to OEM specifications and is a direct-fit replacement. Includes new pressure relief valve and rail pressure sensor.
..
The XDP OER Series Fuel Injector Connector Tube XD526 is a high-quality replacement for the cracked or leaking connector tube in your 2003-2007 Dodge 5.9L Diesel. The connector tubes on your truck feed the fuel from the high-pressure common rail to the fuel injectors located in the cylinder head.Als..
Anodized aluminum 3/8" quick connect to -8AN male adapter fitting. Fits 2003-2018 Dodge Ram with Cummins OE sending unit sending unit output to allow you to easily adapt aftermarket pumps and filters to the OE sending unit, including our Fleece Performance Auxiliary Fuel Filter and Line Kits (P..
Fits: 2003-2019 Dodge 2500/3500 35 Gallon Tank (98.3" Bed Length)Recommended for replacement whenever the fuel tank is replaced or serviced, this strap is a direct replacement for the original. Manufactured from durable materials to withstand harsh road and weather conditions.Direct replacement..
All new stainless steel fuel tube nuts from Fleece Performance. Ensure a proper seal on your injector tubes and high pressure injection lines with our high tolerance nuts produced from 300 series stainless steel. Includes a quantity of 6 nuts. APPLICATION NOTESReplaces Cummins P/N: ..
S&B Tanks 60 Gallon replacement fuel tankImportant Note: This tank won't fit trucks with aftermarket drivelines.COMPATIBLE WITH GOOSENECK AND 5TH WHEEL: YESCOMPATIBLE WITH OE SKID PLATE: NODIMENSIONS: 82.31" X 17.68" X 18.99"DRAIN: YESEMBEDDED FITTING THREAD SIZE: 1..
S&B's 52-gallon fuel tank directly replaces the OEM 31-gallon tank without any cutting, drilling, or special modifications. This makes for a trouble-free, faster installation process. S&B's replacement fuel tank holds 2 more gallons than competitor tanks allowing you to save time, go futher,..
For use with trucks with Titan Tank 7030206 for trucks without factory skid plate.This is designed to provide support for the Titan Tank on trucks that did not come equipped with the factory skid plate under the transmission. Required to install tank: 7030206 on trucks without factory skid plate.&nb..
Dodge Applications notes:Allows titan 7030206 to be mounted into a 06-12 mega cab short bed truck. Used in trucks that have the factory skid plate beneath the transmission.Ford Application notes:Allows titan 7020308 to be mounted into the 08-10 F450 long bed truck. Tank can be mounted in the truck W..
Cummins 12 valve and 24 valve lift pump block off plate. Covers the hole on 89-98 12 Valves that would normally have a lift pump bolted into it. Allows you to eliminate the lift pump bracket on 98.5-02 24 Valve Cummins trucks.03-18 trucks, this blocks off the ccv breather drainback port.
O-ring ..
The XDP Fuel Tank Sump XD182 is the perfect solution for those wanting to maximize fuel delivery to their engine. This One Hole Design Fuel Tank Sump is easier to install than others on the market, and it only requires one hole in your fuel tank!The XD182 provides an outlet for fuel on the bottom of..
Replacement Fuel Control Actuator (FCA) for 5.9L Dodge CP3. If you are experiencing a stuble or surge at idle you may have a worn out FCA. This is a direct replacement OEM part.
Replaces OEM Part Number 4932457
Bosch Part Number: 1465zs0062
Superseded Part Number: 0 928 400 666..
Bosch Replacement fuel injection rail for 2003-2007 Dodge 5.9L Cummins.Comes with fuel rail pressure sensor and fuel pressure limiting valve
May take 2-3 business days before part ships out. If you are in a hurry please call for shipping quote.
Bosch part number: 0445226014..
Replacement fuel injection rail for 2003-2007 Dodge 5.9L Cummins.Comes complete with with rail pressure sensor and fuel pressure limiting valve, for easier installation...
Wagler Cummins Dual CP3 Cover for Common Rail Cummins Engines.Drives both injection pumps off the rear.The ECM must be relocated.Part Number: WCPD6710 ..
Also called a connector tube or crossover tube nut. This is for a single (1) nut, 6 are needed.Genuine OE Bosch
Bosch Part number: F00RJ00437Replaces:Cummins: 3946625, 4893739, 5264181Mopar: 5086866AB..
CNC machined stainless Push-Lock high flow fitting for your CP3. This is designed to work with any 1/2" fuel hose and does not require a hose clamp when used with Push-Lock style hose.
G&R Part Number: GRD00169..
The Alliant AP0083 Injector Brush Kit is a must have item in the toolbox of any 2003-2018 Dodge 5.9L & 6.7L Cummins technician. The Alliant Injector Brush Kit provides you with all the proper tools you need to clean the injector bore and seat while installing new injectors in an engine. Fea..
Fish Tuning Advanced CP3 Controllers will work with all dual or triple CP3 kits.
And yes, it really is as small as it looks, it's only 1" X 1" X 1/2" and easy to hide almost anywhere. Our triple CP3 Controller is hardly bigger - 1 3/4" X 1" X 1/2"..
Fuel Sump
Features:
• 1/2" NPT Outlet Port
• 1/2" NPT Return Port With Stand Tube
• Fully Functional Water Separator Sump
• Does not require removal of fuel tank
• Made in USA
RCD: RCD-0000490001..
Billet Fuel Sump offered by Power Driven Diesel is your next project. This Billet fuel sump provides your Lift pump with a higher flow of fuel using a gravity-fed design. If your truck is running a draw straw style fuel pickup, these sumps eliminate the dreaded 1/4 tank suction issue.Purchase the Po..
The XDP Push-Lock Fuel Pressure Tee XD200 is machined from aluminum with a pre-drilled & tapped 1/8" NPT port to accept a fuel pressure sender or hose. The 1/2 Push-Lock fitting makes it ideal for use with aftermarket fuel systems such as Airdog or FASS. Simply install this fitting in-line for a has..
The XDP Fuel Filter Delete is a quick and simple solution for removing your factory fuel filter canister. This T6 billet aluminum filter eliminator installs in under 30 minutes by connecting the factory low pressure fuel lines together. Features:
Ties low pressure fuel lines together at factor..
This is Full Send Diesel's 1998.5+ Dodge Cummins FASS Fuel System/ SUMP DIY Install Kit. This Kit includes everything you need to plumb you fuel system with AN fittings and hose when installing your FASS fuel system and Beans Diesel Dual Port Sump if you choose to do so. The rubber hoses that come w..
Prevent cold weather gelling of your fuel system with BD's PTC Heating element. Sandwiched between the water separator, pre-filter and/or the filter head, the BD fuel heater is perfect for cold weather warriors. The premade wiring harness with sealed electrical connectors offer qiuck and easy instal..
Prevent cold weather gelling of your fuel system with BD's PTC Heating element. Sandwiched between the water separator, pre-filter and/or the filter head, the BD fuel heater is perfect for cold weather warriors. The premade wiring harness with sealed electrical connectors offer qiuck and easy instal..
The perfect addon to maximize fuel delivery and customization when installing an aftermarket fuel system. Avoid the common quarter tank issues typically seen with the in-tank draw straws used with lift pumps such as Fass, Airdog and many others. No Limit Fabrication: SUMP..
One of the most critical parts of your truck is it's fuel system! Do not just let your FASS or AirDog hang down from your frame and be exposed to road, tire, and field hazards! We have created a completely new mounting system for your FASS or AirDog that compliments an already great fuel system.
..
Mopar OEM fuel canister o-ring seal kit for '03-'07, 5.9L Dodge Diesel trucks. Kit includes:Fuel lid sealFuel drain sealWIFS sealFuel heater sealFuel pump seal ('03-'04) Does not include banjo bolt gaskets. Part Number: 5093129AA..
The XDP Fuel Tank Sump with Built-In Fuel Return XD243 provides you with a perfect option to maximize fuel delivery, and customization when installing your aftermarket fuel system. Avoid the common 1/4 tank issues associated with in-tank draw straws used with fuel systems such as AirDog, FASS and ma..
One rail plug CNC machined for the fuel rail on a dodge cummins engine. Also known as a race fuel valve. This plug replaces the factory banjo bolt mounted on the top side of the pressure relief valve (which is on the top of the fuel rail). The pressure relief valves are known to leak and rob you o..
HIGH PERFORMANCE - HIGH FLOW
BULLET PROOF
12MM X 1.5 BANJO BOLT with a pair of sealing washers.
We search the diesel forums looking for problems that could be solved with a new product. One complaint that caught our attention is the poor quality of high flow banjo bolts on the market. Guys are s..
Backordered with No ETA **Updated on 03/26/2024**
Old Style Fuel Connector Tube for 2003-2007 Cummins 5.9L Diesel
Includes O-rings.
*Price is for one, 6 are needed for complete set.
Bosch part number: F00RJ01572
Replaces:
Cummins: 3976657
Mopar: 68441874AA..
03-07 Dodge 5.9L 24 Valve Cummins Diesel .093 High Flow Fuel Connector Tubes
Includes new o-rings.
Recommended if you have a modified or dual cp3 setup.
$200.00 Core Charge to be refunded upon receipt of your stock connector tubes.Customer is responsible for return freight of connector tubes.
..