Mopar OEM fuel canister o-ring seal kit for '03-'07, 5.9L Dodge Diesel trucks. Kit includes:Fuel lid sealFuel drain sealWIFS sealFuel heater sealFuel pump seal ('03-'04) Does not include banjo bolt gaskets. Part Number: 5093129AA..
Cummins 12 valve and 24 valve lift pump block off plate. Covers the hole on 89-98 12 Valves that would normally have a lift pump bolted into it. Allows you to eliminate the lift pump bracket on 98.5-02 24 Valve Cummins trucks.03-18 trucks, this blocks off the ccv breather drainback port.
One rail plug CNC machined for the fuel rail on a dodge cummins engine. Also known as a race fuel valve. This plug replaces the factory banjo bolt mounted on the top side of the pressure relief valve (which is on the top of the fuel rail). The pressure relief valves are known to leak and rob you o..
HIGH PERFORMANCE - HIGH FLOW
12MM X 1.5 BANJO BOLT with a pair of sealing washers.
We search the diesel forums looking for problems that could be solved with a new product. One complaint that caught our attention is the poor quality of high flow banjo bolts on the market. Guys are s..
Old Style Fuel Connector Tube for 2003-2007 Cummins 5.9L Diesel
*Price is for one, 6 are needed for complete set.
Bosch part number: F00RJ01572Replaces: Cummins: 3976657Mopar: 68441874AA..
Also called a connector tube or crossover tube nut. This is for a single (1) nut, 6 are needed.Genuine OE Bosch
Bosch Part number: F00RJ00437Replaces:Cummins: 3946625, 4893739, 5264181Mopar: 5086866AB..
03-07 Dodge 5.9L 24 Valve Cummins Diesel .093 High Flow Fuel Connector Tubes
Includes new o-rings.
Recommended if you have a modified or dual cp3 setup.
$200.00 Core Charge to be refunded upon receipt of your stock connector tubes.Customer is responsible for return freight of connector tubes.
Purchased a FASS or Air Dog and tired of having your stock filter? Hellmann Performance solved the problem with an economical fuel filter delete. A single piece of T6 billet aluminum machined to perfection. The delete fits perfectly between the OEM fuel filter in / out lines and dramatically reduces..
Genuine Bosch OEM qualtity replacement Cascade Overflow Vavle. Fits 2003-2007 5.9L Cummins Diesels.
Regulates lubrication to internal parts of fuel pump and regulates the fuel pressure to the fuel control solenoid valve. Also, controls the fuel returning to the tank.
Bosch part number: F-00N-200-7..
5.9L Cummins Diesel Rail Test Plug. Also known as injector block off tool.
Used to cap off injection line ports on the rail so you can narrow down what injector may be returning too much fuel.
Cummins part number: 3164325..
Custom stainless fitting for testing of CP-3 return flow and injector return flow on Common Rail fuel systems. Used to replace the banjo fitting on the return line at the rear of the fuel filter housing for testing return flow. Please consult you Dodge/Mopar service manual for correct testing proced..
This kit is designed to be installed with our 2003-2007 Cummins Fuel Distribution Block (FPE-FFD-RF-3G). It comes complete with all of the high quality AN fittings and push lock hose needed to cleanly plumb your dual CP3s with our Fuel Distribution Block.
Distribustion block must be purchased sep..
PDP High-Flow 12mm x 1.5 Banjo Bolt for the 98.5+ Cummins Diesel Engines
Features:Higher flow than stock
CNC machined billet aluminum (stronger)
Includes (2) banjo washer seals
Part Number: PDPHF12MM...
Bosch Replacement fuel injection rail for 2003-2007 Dodge 5.9L Cummins.Comes with fuel rail pressure sensor and fuel pressure limiting valve
May take 2-3 business days before part ships out. If you are in a hurry please call for shipping quote.
Bosch part number: 0445226014..
One of the most critical parts of your truck is it's fuel system! Do not just let your FASS or AirDog hang down from your frame and be exposed to road, tire, and field hazards! We have created a completely new mounting system for your FASS or AirDog that compliments an already great fuel system.
This kit eliminates the restrictive banjo fittings from the fuel filter canister to the injection pump utilizing pushlock 90 deg. fittings, metric adapters and Parker Superflex 1/2" or 3/8" bio fuel compatible hose.A great addition to your Raptor or ANY other system where maximum fuel flow and exhau..
The XDP Push-Lock Fuel Pressure Tee XD200 is machined from aluminum with a pre-drilled & tapped 1/8" NPT port to accept a fuel pressure sender or hose. The 1/2 Push-Lock fitting makes it ideal for use with aftermarket fuel systems such as Airdog or FASS. Simply install this fitting in-line for a has..
Tired of waiting at the fuel pump to trickle the last 3 to 4 gallons into the tank on your '03-'12 Dodge Ram? Then this is the kit for you! This kit relocates the fuel tank vent from the factory location to the highest point on the tank. This allows you to add an additional 3 to 4 gallons to the tan..
The XDP Fuel Filter Delete is a quick and simple solution for removing your factory fuel filter canister. This T6 billet aluminum filter eliminator installs in under 30 minutes by connecting the factory low pressure fuel lines together. Features:Ties low pressure fuel lines together at factor..
The XDP Fuel Tank Sump with Built-In Fuel Return XD243 provides you with a perfect option to maximize fuel delivery, and customization when installing your aftermarket fuel system. Avoid the common 1/4 tank issues associated with in-tank draw straws used with fuel systems such as AirDog, FASS and ma..
Deviant Race Parts 03-07 Dodge 5.9L Cummins Fuel Rail Plug The DRP rail plug may be needed after installing fuel mods, and if you are continually throwing rail pressure codes, and/or, issues with rail pop.Features:Designed to replace the stock fuel pressure regulator (FPR) valve.
Machined 304 ..
Custom stainless fitting for correct isolation and testing of the Common Rail high pressure relief valve. Just removing the banjo bolt will give false indications of a leaking or blown high pressure relief valve. -For proper testing this fitting is used to isolate the relief valve from the CP-3 retu..
Prevent cold weather gelling of your fuel system with BD's PTC Heating element. Sandwiched between the water separator, pre-filter and/or the filter head, the BD fuel heater is perfect for cold weather warriors. The premade wiring harness with sealed electrical connectors offer qiuck and easy instal..
60 Gallon*, extra heavy duty, cross-linked polyethylene fuel tank. New and redesigned for 2012. Tank comes complete with powder-coated or plated steel mounting strap support set, extruded rubber mounting bushings, rollover safety vent valve, shims and needed accessories.
For 2500 & 3500 Models with..
Fish Tuning Advanced CP3 Controllers will work with all dual or triple CP3 kits.
And yes, it really is as small as it looks, it's only 1" X 1" X 1/2" and easy to hide almost anywhere. Our triple CP3 Controller is hardly bigger - 1 3/4" X 1" X 1/2"..
Custom stainless fitting for lift pump flow testing on Common Rail engines. Used to replace the banjo bolt at the CP-3 inlet. Isolates the lift pump from the rest of the low pressure fuel system for lift pump testing.Please consult you Dodge/Mopar service manual for correct testing procedures.GDP pa..
CAT Fuel Filter Kit for 03-18 5.9L/6.7L Cummins
Features:Compatible with Dual CP3
Factory WIF Compatible
Fuel Pressure Sensor Bung
Comes with Plug for Single Supply Applications
Billet AluminumFitment Notes:03-09 Trucks Utilize the Fuel Return Pass-Through
10-18 Trucks Do Not Util..