The BD-Power 1050485 Venom Dual CP3 Kit With Controller & CP3 Pump is an excellent way to get dual injection pumps in your 2005-2009 Dodge 5.9L/6.7L Cummins. This dual CP3 kit includes a plug & play control module that splits the ECM signal and does not require any cutting or splicing. The s..
The BD-Power 1050476 Venom Dual CP3 Installation Kit makes it easy to maximize the potential of the fuel system on your 2005-2009 Dodge 5.9L & 6.7L Cummins. Adding an additional CP3 pump to run in conjunction with your factory high pressure CP3 pump will allows you to support well over 1000HP, a..
FCA (Fuel Control Actuator) Sensor for 03-07 Dodge 5.9L Cummins Diesel
This is a stock replacement part. Some people also call this a fuel pressure regulator.
Part number 4932457
This is Bosch part number 0928400666 in a Cummins Box. Also replaces Mopar 5183245AA...
The Sportsman Pump starts out life as a brand new, 6.7L Cummins-based Bosch CP3 (this means no core pump is required on your part). Exergy then outfits it with the appropriate upgrades to support 650-rwhp. The key benefit to the Sportsman CP3 is its ability to flow at higher engine speeds—up to 4,50..
6.7L Bosch Fuel Rail & Injector Line Package Complete Bosch 6.7L fuel rail and injector line package for use with our Mega-Rail Conversion Kit. This kit is NOT a direct bolt on kit for 03-07 5.9L Cummins trucks.Package Includes:New Bosch 6.7L Fuel Rail with relief valve and rail pressure sensor
2003-2007 Dodge 5.9L Cummins OE Rail Return Line.
This line runs from the cascade/fuel limiting valve to the fuel filter housing. It also runs towards the CP3.
This part is NOT always in stock, please call if you are in a hurry.
Number 9 from image ONLY!
Chrysler part number: 5086810AA..
The Fleece Performance CP3K is a modified Cummins CP3 designed to eliminate the factory fuel flow restriction that begins at 3,000 RPM. If you have a stock CP3 pump you are losing fuel flow and rail pressure after 3000 RPM, which correlates to lost horsepower when you need it most. This cost effecti..
Exergy Performance 10CP3 10mm Stroker Modified CP3 Fuel Injection Pump If you are looking for the most aggressive flowing single CP3 pump on the planet than the Exergys line of stroker CP3 pumps are for you. Exergy's 10mm stroker CP3 pump will flow more fuel volume than any other CP3 pump currently ..
Pure Diesel Power is proud to offer the New 33% over Bosch Injection Pump for the 5.9L Dodge 2003-2007 by Industrial Injection.The Modified CP3 offered by Industrial Injection is a drop in replacement for the stock CP3 fuel pump. The Modified CP3 fuel injection pump flows 30% more fuel than a stock ..
The Fleece Performance Cummins PowerFlo 750 CP3 is a straight forward, no inflated numbers, CP3 upgrade proven to support 750 RWHP with the proper complimenting modifications. Not only will it support 750 RWHP, but it also eliminates the factory fuel flow restriction that begins at 3,000 RPM. If you..
PDP now offers the New 85% over Bosch Dragon Fire Injection Pump for the 5.9L Dodge 2003-2007 made by Industrial Injection.This Modified CP3 offered by Industrial Injection is almost a drop in replacement for the stock CP3 fuel pump. The Modified CP3 fuel injection pump flows 85% more fuel than a st..
PPE's belt-driven Bosch CP3 fuel pump works in conjunction with the stock fuel system and is controlled by a sophisticated microprocessor module. Adding our kit to your stock fuel system reduces drive load on the stock CP3 pump, thereby increasing pump reliability. Both pumps work together, each del..
Bosch Replacement fuel injection rail for 2003-2007 Dodge 5.9L Cummins.Comes with fuel rail pressure sensor and fuel pressure limiting valve
May take 2-3 business days before part ships out. If you are in a hurry please call for shipping quote.
Bosch part number: 0445226014..
If you want to more than double the fuel output of your stock CP3 pump then this powerhouse from Industrial Injection is what you need. The Double Dragon is capable of extreme horse power and should only be used with high flow custom injectors. This pump is for competition, organized racing, and off..
ATS Twin CP3 System for the 2003-2004 Cummins doubles the fueling capability when running large tunes and bigger injectors. The system is not only designed to work in conjunction with the factory CP3, but it also maximizes the system. Utilizing ported rail fitting, larger diameter high pressure fuel..
Dodge 5.9L CR Fuel Pump
2003-2007 (Remanufactured)$300 core fee
1 year parts & labor warranty, click here for full details.
Cores must be:In an "as removed from engine" state.
Free from excessive rust, fire damage, or other visible physical damage.
Cannot have been disassembled.
The Industrial Injection dual CP3 is the ultimate for performance. This kit can be purchased with a new, modified, Dueling Dragons (two 85% Dragon Fire CP3’s) or the Dueling Double Dragons (two 120% CP3’s) CP3's for those who compete in the competition circuits. However, this kit DOES NOT include a ..
Get the most fuel flow possible from your stock CP3 pump. Eliminate possible cavitation damage from excessive suction with this "high flow" PPE CP3 Pump Inlet Fitting. The benefit is the larger inner diameter of the PPE fitting allowing fuel to flow 70% more efficiently than with the restrictive sto..
Dual Feed for the 2003-2006 Dodge. This extra line runs from the CR CP3 fuel injection pump to the top of the fuel rail. This extra fuel line increases fuel flow to the rail to keep fuel pressure up when your foot demands it. Kit comes with all hardware needed for install.
Click here for installati..
Take full control of your Cummins dual CP3's using your just your ECM. The CP3X2 harness allows you to control your Cummins dual pumps without an expensive dual pump controller. We recommend multiplying the stock FCA current table (D0787) on the Cummins ECM's by 1.6-1.7 as a place to start. The FCA ..
ATS Twin CP3 System for the 2004.5-2007 Cummins doubles the fueling capability when running large tunes and bigger injectors. The system is not only designed to work in conjunction with the factory CP3, but it also maximizes the system. Utilizing ported rail fitting, larger diameter high pressur..
Injection Pump, Performance CP3 - 2003+ Dodge 5.9L Cummins
The ATS Performance Replacement CP3 Common-Rail Injection Pump significantly increases fuel flow and internal pump pressure with a different gear pump, actuators, and regulator, allowing you to run up to 600 horsepower without setting codes..
Fish Tuning Advanced CP3 Controllers will work with all dual or triple CP3 kits.
And yes, it really is as small as it looks, it's only 1" X 1" X 1/2" and easy to hide almost anywhere. Our triple CP3 Controller is hardly bigger - 1 3/4" X 1" X 1/2"..
This pump is a Genuine Bosch New pump.
The CP3 injection pump from Industrial Injection is the leading pump on the market. We strive to deliver the best diesel performance parts to the end user. We have a genuine bosch rebuilding facility in our shop. We take pride in all of our parts and help you ..
Twin Fueler Injection Pump Kit, 2003-04 Dodge 5.9L Cummins w/out pump (customer provides 2nd pump, MUST use pump from GM LB7 (97720662) or LLY (97303762)Duramax!
ATS Twin CP3 System for the 2003-2004 Cummins doubles the fueling capability when running large tunes and bigger injectors. The system is..
FeaturesPump to Pump Design for Ease of Installation, Better Looks, and More Efficiency
Custom Billet Wheel (with optional polishing)
Custom Second Wheel Billet Acorn Nut
Comes with Hardware and High-Pressure Fitting/Line
Comes with Fish CP3 Controller for Reliability and Simplicity
ATS Twin CP3 System for the 2004.5-2007 Cummins doubles the fueling capability when running large tunes and bigger injectors. The system is not only designed to work in conjunction with the factory CP3, but it also maximizes the system. Utilizing ported rail fitting, larger diameter high pressure fu..
Supports up to 750hp!BD’s High Performance CP3 (HPCP3) Injection Pump with up to a 72% increase in capacity / displacement delivers enough fuel to support up to 750hp while maintaining 24,000psi of rail pressure. The HPCP3 pump replaces the existing injection pump and simply bolts in place to pr..
CNC machined stainless Push-Lock high flow fitting for your CP3. This is designed to work with any 1/2" fuel hose and does not require a hose clamp when used with Push-Lock style hose.
G&R Part Number: GRD00169..
Thru testing we have discovered that twin CP-3's require lower feed pressures (15 to 20 psi) to avoid high rail pressure codes at idle. Now we have the answer for maximum flow when running lower feed pressures. The GDP Big Line Kit for trucks with twins CP-3's!
The factory hard lines from the fuel ..
Fits all 03-07 5.9L Dodge CumminsSometimes stock just doesn't cut it. That's why we are proud to offer our 10MM Stroker CP3 Pump for the 2003-2007 5.9L Cummins. This pump is capable of delivering 30% more fuel than a brand new stock unit.How do we do this? We start with a BRAND NEW (not remanufactur..