Shop By Category
Your Cart

89-18 5.9L/6.7L Cummins Colt Cams Stage 4 "Big Stick" Camshaft

89-18 5.9L/6.7L Cummins Colt Cams Stage 4 "Big Stick" Camshaft
89-18 5.9L/6.7L Cummins Colt Cams Stage 4 "Big Stick" Camshaft

Available Options

$649.00

  • Part Number: C.346.S
  • Est. Ship Time: Usually Ships By Next Business Day

The Colt Cams Stage 4 "Big Stick" Cummins Camshaft gives your 1989-2018 Dodge 5.9L/6.7L Cummins the same great drivability, mid-range torque, horsepower, and bottom end as the Stage 3, but with a larger exhaust profile to give you the max flow on large singles or compounds. This camshaft is designed as a drop-in that is good up to 4400 RPM. 

Features: 

  • Drop-In Camshaft
  • Good Up To 4400 RPM
  • Great For Large Singles & Compound Turbos
  • Duration @ .050 - INT. 181 Degrees, Cam Lift 0.280, Lobe Sep. 107.5
  • Duration @ .050 -EXH. 218 Degrees, Cam Lift 0.323
  • Installation Notes:
  • Follow Cummins installation instructions, use adequate amounts of assembly lube. 
  • Retainer Torque - 44 ft-lbs. Use red Loctite. 
  • When using retainer on Common Rail, clearance is required. 
  • Always use new or re-crowned lifters. 
  • Big Stick cast billets require 2nd gen 24V lifters. Cummins Part# 3942565
  • If using Common Rail lifted with a larger head, make sure it clears the fuel pump lobe #5 on 12V engines. CR blocks should be okay but you should still check. If your gear is not pressed in all the way, the lifters could touch. 
  • Extra clearance may be required with aftermarket connecting rods. 
  • Drop-in cam is applicable in MOST cases, you MUST check clearances. Especially if a head has been planed, block decked, valve recessions..etc. Always check clearances before starting. 

Break-In Procedure:

  • Cam lube on all lobes, lifter faces, and oil pump gears. 
  • Oil all bearing journals and lifter barrels. 
  • Always turn the engine over by hand before starting, check for clearances and proper timing location.
  • Fire up to 1800-2000 RPM for 18-20 minutes. 

Zinc Additive: Most oil companies have taken out a percentage of additives that are meant for anti-scuffing for break-in on flat tappet cams. A zinc additive must be added to your oil before you fire up your engine for the first time. 

NOTE!!!!! When we say our camshaft is a straight drop in, we mean: In almost all cases.

However, due to many contributing variances in an engine: heads planed, block decked, valve recession etc... any cam including stock, should always be checked for clearance before start up!

CAUTION! IF USING AFTERMARKET CONNECTING RODS, EXTRA CLEARANCE MAY BE REQUIRED ON CAM CORE!

 

Colt Cams: C.346.S

WRITE A REVIEW

 

Please login or register to review

 
Lame California Prop 65 Notice
Tags: 5.9L , 6.7L , Cummins , Colt , Cams , Stage , 4 , Big , Stick , Camshaft , CCSTAGE4