Dodge Ram 6.7L Cummins Sensors & Pigtails

Replacement connectors with 6" pigtail on either end for use on the Cummins engine and other vehicle applications. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement parts you need to get your tru..

Replacement engine starter connector with 6" pigtail for use on the 2003-2018 Cummins. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement parts you need to get your truck or car back on the road q..

Our replacement connector with 6" pigtail will get you back on the road quickly.  Includes heat-sealable butt-style connectors. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement parts y..

Our 8" extension harness for the 2003-2018 Dodge RAM provides for additional routing clearance to a variety of sensors on the engine including the camshaft, crankshaft, and exhaust pressure sensors. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimp..

OEM Mopar crankshaft/ camshaft position sensor for 03-18 5.9L/ 6.7L Cummins. Fitment:YearMakeModelBody & TrimEngine & Transmission2018Ram2500Big Horn, Laramie, Laramie Longhorn, Limited, SLT, Tradesman6.7L L6 - Diesel2018Ram3500Big Horn, Laramie, Laramie Longhorn, Limited, SLT, Tradesma..

The Driven Diesel Fan Clutch Accelerator Switch for 05-07 5.9L MANUAL TRANSMISSION Dodge Cummins AND 07-20 6.7L AUTO OR MANUAL TRANSMISSION Dodge Cummins trucks will give you some manual control of your electronic engine fan clutch. When enabled, the Fan Clutch Accelerator will cause your ECM to thi..

Convert your 2006-2018 Ram with 6-pin injector connectors to the 2003-2005 4-pin injector connectors with our plug-and-play conversion harness.  This conversion harness is for use on a 2006-2018 Cummins where a 2003-2005 rocker box style is used. Produced in-house, our manufacturing process inc..

Cummins injector harness connector with 6" pigtail for 2006 - 2022 5.9L and 6.7L Cummins engines. Two of these connectors are utilized on the engine and connect the injector harness to the valve cover wiring harness.  Includes heat-sealable butt-style connectors. Produced in-house, our manufact..

Valve Cover Gasket PigtailBrand: BT-PowerCondition: NewEngine Fitment:Cummins 5.9L / 6.7LUnderhood temps can shorten the life of the harness connections, instead of replacing the full harness, Bostech offers the pigtail separately for an easier and more affordable fix. Part number: WH03027..

Stock replacement exhaust back pressure (EBP) sensor for 07.5-10 6.7L Cummins by Bostech. Built to meet or exceed factory specs. Cross reference numbers: 4928594, 408798NX, 4087989, ISK223Part number: BTS031323..

The ECM monitors the state of your DPF by using a sensor which takes a reading of the pressure differential between the two. This helps your truck stay up and running efficiently and keeping the DPF system up and running without issues. OEM Replacement!  Mopar: 05149229AA..

Engineered to resist stress fractures, corrosion and carbon buildup blockage, this exhaust gas recirculation tube is a direct replacement for the original equipment EGR tube. Includes same features and components as installed on original EGR tube. The original tube can sometimes get plugged/ gummed ..

The exhaust back pressure relocation Kit for 2007.5-2012 RAM w/ 6.7 Cummins will allow you to relocate the EBP sensor from the factory location on thermostat housing elbow to a new mounting block on the front side of the radiator.  Kit includes EBP sensor mouting block and exhaust manifold pres..

Our Fleece Performance adapter harness allows the early (2007.5-2012) Dodge 6.7L to run the updated turbo actuator that is used on 2013 and up VGT Turbochargers. Replacement for Cummins P/N 5347703.Part number: FPE-34425..

Direct fit replacement fuel pressure actuator for 07.5-14 Dodge Ram 6.7L Cummins applications. Cross reference numbers: 68005241AA, 0928400642Fuel Pressure Regulator MPROPBrand: BostechCondition: NewLimited 13 month / unlimited mileage warrantyEngine Fitment:Cummins 6.7LTechincal Informati..

Mopar OEM Replacement MAP sensor for 2007.5-2018 6.7 Cummins Mopar Part Number: 68453737AASuperseded Part Number: 68005161AASuperseded Part Number: 68005161AB..

Replacement connector with 6" pigtail for use on the 6.7L Cummins enigines and HE400VG/HE451VE turbochargers. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement parts you need to get your truck ba..

MAF Sensor for '07.5-'17 Dodge Turbo Diesel trucks with the 6.7L engine. This sensor mounts to the airbox intake tube on the PASSENGER side of the truck. Mopar Part Number: 68002441AC..

Replacement connector with 6" pigtail for use on the 6.7L Cummins. Includes heat-sealable butt-style connectors. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement parts you need to get your truck..

Replacement connector with 6" pigtail for use on the 6.7L Cummins, including ISL and ISX engines. Includes heat-sealable butt-style connectors. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement p..

Replacement connector with 6" pigtail for use on the 2007-2022 Ram with 6.7L Cummins along with many other applications. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement parts you need to g..

Replacement connector with 6" pigtail for use on the 6.7L Cummins and other vehicle applications. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement parts you need to get your truck back on the ro..

Replacement connector with 6" pigtail. Includes heat-sealable butt-style connectors. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement parts you need to get your truck or car back on the road qui..

This engine air intake heater relay is designed to match the fit and function of the original relay on specified vehicles, and is engineered for durability and reliable performance.Direct replacement - this engine air intake heater relay is designed to match the fit and function of the original rela..

Fuel heater for use in Fleece Performance heated fuel filter kits including PowerFlo Lift Pumps with a heater provision on the filter base.   Fuel heater specifications: Temperature switching points: ON: 28.4F +/-5.4F,  OFF: 48.2F +/- 5.4F At typical fuel flow rates a temperatur..

Gain additional flexibility in your harness routings with this 18" extension harness for the Cummins and Duramax rail pressure sensor. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement parts..

Our replacement connector with 6" pigtail will get you back on the road quickly.  Includes heat-sealable butt-style connectors. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement parts you ne..

Replacement connector with 6" pigtail for use in multiple locations on the Duramax, Cummins, Powerstroke, and other GM vehicles. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement parts you need t..

Mahle OEM quality Valve Cover Gasket Set for 2006-2023 5.9L & 6.7L Cummins. With Integrated Wire HarnessValve Cover Gasket Material: Molded Rubber/Steel Cross Reference part numbers: 5264950 Note: These items may come in a Victor Reinz box, as Mahle has acquired Victor Reinz. Mahle part..

Will work with 1998.5 to 2002 and 2004.5-2023 and up Cummins diesel engines. Will also work on Cummins ISX diesels. 2003-2004 Cummins engines Click Here. Cummins: 4954905..

Replacement Fuel Heater and Turbo Wastegate Solenoid Electrical Connector with 6" Pigtail for the Cummins engines. Includes heat-sealable butt-style connectors. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest..

Replacement connector with 6" pigtail for use in multiple locations on MOPAR vehicles including the A/C pressure sensor and transmission pressure transducers. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest qualit..

Replacement connector with 6" pigtail for use on the Cummins engine and other vehicle applications. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement parts you need to get your truck back on the ..

Replacement connector with 6" pigtail for use on the Cummins engine and other vehicle applications. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement parts you need to get your truck or car back ..

Works on 98.5-02 & 04.5-2022 Coolant Temp Sensors Fits Cummins sensor part number 4954905 Pigtail part number: 5394261 superceeds 3163923..

Almost too many applications to list for this multi-purpose two pin connector with 6" pigtail.  This connector is used in hundreds of applications on GM and Dodge vehicles. Includes heat-sealable butt-style connectors. Produced in-house, our manufacturing process includes fully automated wire c..

MAP Sensor for '07.5-'20 Dodge Turbo Diesel trucks with the 6.7L engine. This sensor is found on the back side of the intake horn.  McBee part number: M-2897333 Replaces Mopar part number 53034091AB...

Backordered til Mid December   **Updated on 09/06/2024** MAP Sensor (also called manifold absolute pressure) for '07.5-'20 Dodge 6.7L Cummins Turbo Diesel trucks. This sensor is found on the back side of the intake horn.  Part number: 5698455 Replaces Mopar part number 530..

TERMINAL,ELC CNR REPAIR..

03-17 Dodge 5.9L Cummins Diesel Cam or Crank (uses same sensor) Position Sensor or CPS Replaces: 3408529, 2872277 Cummins: 5594275NX    ..

Cummins fan connector for 2003 - 2009 2500-3500 5.9L and 6.7 Cummins engines. It also works on the 2003-2010 4500 and 5500 Cab and Chassis  5.9L and 6.7 Cummins engines. This is an aftermarket connector. This is the Engine or truck harness side of the plug   Connector Kit Includes..

Exhaust backpressure sensor tube. Runs from exhaust manifold to the exhaust backpressure sensor near the thermostat. Includes #10 in the picture. Mopar: 68038087AA..

Billet Steel AIT sensor bung for those of you that are making your own turbo piping kits on a 5.9/6.7 Cummins.INCLUDES:stainless socket head screws5.00″ radius to fit nicely on a 5.00" pipe. Stainless Diesel part number: AITWB..

Billet aluminum AIT sensor bung for those of you that are making your own turbo piping kits on a 5.9/6.7 Cummins.INCLUDES:stainless socket head screws5.00″ radius to fit nicely on a 5.00" pipe.available in billet aluminum or mild steel Stainless Diesel part number: AITWB-20..

Same as the Cummins piece, just not packed in a Cummins box.  Fits 2007.5-2012 Dodge 2500 & 3500 PICKUPS along with 2007.5-2018 Cab & Chassis Trucks This is the same as Cummins part number 5297640, but in a Bosch Box (Bosch is the manufacturer of the Cummins part number 52976..

Air Intake Temperature Sensor for '07.5-'22 Dodge Turbo Diesel trucks with the 6.7L engine.This sensor installs in the air filter intake piping.  Part Number: 2897332NXSuperseded Part Number: 2897332 (Old part number 4921850)..

Cummins Turbo Speed Sensor ('07.5-'12, 6.7l)  If your 07.5-2012 Dodge 6.7L Cummins turbo Diesel truck gets a P0106 code or exhibits excessive exhaust smoke and higher exhaust gas temperatures than normal, it may be the turbo speed sensor causing the problem. Replacing this part is an easy job to..

HE351VE to HE300VG VGT Adapter pigtail connector. This is to put a 2007.5-2012 Turbo (HE351VE) on to a 2013+ Truck.  Part Number: P1VEAVGT Superseded Part Number: 351300..