Fuel Related Parts

07.5+ Dodge 6.7L Cummins Diesel New .120 High Flow Fuel Connector TubesIncludes new o-rings.Recommended if you have a modified or dual cp3 setup.PLEASE ALLOW 1-3 DAYS FOR SHIPMENT, WE BUILD THESE ON DEMAND.Part Number: FT120/6.7NEW..

This is Full Send Diesel's 1998.5+ Dodge Cummins FASS Fuel System/ SUMP DIY Install Kit. This Kit includes everything you need to plumb you fuel system with AN fittings and hose when installing your FASS fuel system and Beans Diesel Dual Port Sump if you choose to do so. The rubber hoses that come w..

Cummins 12 valve and 24 valve lift pump block off plate.  Covers the hole on 89-98 12 Valves that would normally have a lift pump bolted into it. Allows you to eliminate the lift pump bracket on 98.5-02 24 Valve Cummins trucks.03-18 trucks, this blocks off the ccv breather drainback port.   O-ring ..

 '07.5-'09 Cummins 6.7L Fleetguard FS43257 Fuel Filter & Shell Assembly 2007.5-2010 6.7L Fleetguard FS2 Cummins Filtration has released a new high performance Fleetguard® FS2: Filter-in-Filter technology for the Dodge Ram trucks withthe 6.7L Cummins turbo diesel engines. The new FS43257 filter as..

Remove the Connector Tube From the Cummins CR Without Damaging the Threads! Use the right tool and reuse your Cummins crossover tubes when changing to performance injectors. The common way of removing the Cummins CR crossover tube is to use a pair of Vise Grips. Sure, it works, but you risk damagi..

HIGH PERFORMANCE - HIGH FLOW BULLET PROOF 12MM X 1.5 BANJO BOLT with a pair of sealing washers.  We search the diesel forums looking for problems that could be solved with a new product. One complaint that caught our attention is the poor quality of high flow banjo bolts on the market. Guys are s..

6.7L Bosch Connector Tube Set Includes:6 ea. New Bosch 6.7L Connector Tubes Cummins part number: 2872288, replaces part number 2872395Replaces Mopar- 5175565ACBosch: F00RJ01831..

2007.5-2018 Dodge Ram 6.7L Cummins Diesel Bosch Connector Tube Also known as high pressure crossover tube. We recommend replacing these if you are installing new injectors. Includes:1 injector tube with o-ring6 needed per engine. Bosch: F00RC00647Replaces:Cummins part number: 2872395, 2872393, 287..

Also called a connector tube or crossover tube nut. This is for a single (1) nut, 6 are needed.Genuine OE Bosch Bosch Part number: F00RJ00437Replaces:Cummins: 3946625, 4893739, 5264181Mopar: 5086866AB..

6.7L Bosch Fuel Rail & Injector Line Package Complete Bosch 6.7L fuel rail and injector line package for use with our Mega-Rail Conversion Kit. This kit is NOT a direct bolt on kit for 03-07 5.9L Cummins trucks.Package Includes:New Bosch 6.7L Fuel Rail with relief valve and rail pressure sensor ..

The XDP Race Fuel Valve prevents fuel from being returned to the tank when the pressure release valve is opened due to fuel rail pressure increases. Many high performance electronic tuning devices raise the fuel rail pressure resulting in P0087 & P1011 codes on Cummins engines and P1093 codes on Dur..

Cummins OE replacement fuel injector line. Fits 2007.5-2015 6.7L Cummins Diesels. Line number 4(four) or 5(five) only. Cummins part number: 4935974..

Cummins OE replacement fuel injector line. Fits 2007.5-2015 6.7L Cummins Diesels. Line number 6(six) only. Cummins part number: 4935976..

Set of 3 Fuel Control Actuator FCA Screws Fits 03+ 5.9L/6.7L Cummins   Cummins part number: 4932790..

NOTE: For code free installation of the 6.7L Filter Eliminator the "Water in Fuel" sensor must be removed from the stock fuel filter and plugged in to the factory wiring harness. This is the new Billet Aluminum version of our popular "Filter Eliminator". We've upgraded part and kept the same great ..

NO MORE QUARTER TANK FUEL PROBLEMS! NO MORE DRILLING HOLES IN YOUR FUEL TANK TO INSTALL AN AFTERMARKET PICKUP TUBE OR DRAWSTRAW! This kit works on all 2005-2009 trucks that have the in-tank lift pump. This will also work on 98.5-04.5 trucks that have had their fuel lift pump re-located to the fuel ..

Cummins OE replacement fuel injector line. Fits 2007.5-2015 6.7L Cummins Diesels. Line number 2(two) or 3(three) only. Cummins part number: 4935982..

Fits all 2007 - 2016 Dodge Ram 6.7L Cummins Pickup AND Cab & ChassisAlso fits 04.5-2010 GM 6.6L Duramax Diesel trucks (instructions not included for this application)The OEM fuel pressure relief valve is designed to relieve pressure once the fuel rail gets above 27,000 psi. Some aftermarket tuning o..

The Sinister Diesel Race Fuel Rail Plug replaces the stock or shimmed pressure relief valve. Removing the stock pressure relief valve will help maintain fuel rail pressure during full throttle driving by completely blocking the pressure relief port. It also helps eliminate low fuel rail pressure DTC..

Cummins OE replacement fuel injector line. Fits 2007.5-2015 6.7L Cummins Diesels. Line number 1(one) only. Cummins part number: 4935981..

New genuine OEM replacement fuel filter housing cap assembly with O-ring -Fits 2010 to 2016 Dodge Ram trucks 2500, 3500, 4500 & 5500 with 6.7L Cummins diesel Mopar part number:  68065612AA..

Bosch 1110010013 Picture for representation purposes only...

Get consistent fuel rail pressure from your 2004.5-2010 GM 6.6L Duramax or 2007.5-2018 Dodge Ram 6.7L Cummins with the BD-Power 1050071 Fuel Rail Plug. Weak or failing fuel pressure relief valves can cause starting and drivability issues. BD's Fuel Rail Plug holds up to 30,000 psi rail pressure, mak..

Includes:10x #1, Cummins 3963990..

   The DTech DT670004 Injector Connector Tube for your 2007.5-2013 Dodge 6.7L Cummins is a direct replacement for your factory Connector Tube. Often known as supply tubes, high-pressure connectors, connecting tubes, or feed tubes, these are responsible for feeding your injectors with fuel. It's reco..

PDP High-Flow 12mm x 1.5 Banjo Bolt for the 98.5+ Cummins Diesel Engines Features:Higher flow than stock CNC machined billet aluminum (stronger) Includes (2) banjo washer seals  Part Number: PDPHF12MM...

07.5+ Dodge 6.7L Cummins Diesel Reman .120 High Flow Fuel Connector Tubes Includes new o-rings. Recommended if you have a modified or dual cp3 setup. $200.00 Core Charge to be refunded upon receipt of your stock connector tubes.Customer is responsible for return freight of connector tubes. PLEA..

One of the most critical parts of your truck is it's fuel system!  Do not just let your FASS or AirDog hang down from your frame and be exposed to road, tire, and field hazards!  We have created a completely new mounting system for your FASS or AirDog that compliments an already great fuel system. ..

The XDP Push-Lock Fuel Pressure Tee XD200 is machined from aluminum with a pre-drilled & tapped 1/8" NPT port to accept a fuel pressure sender or hose. The 1/2 Push-Lock fitting makes it ideal for use with aftermarket fuel systems such as Airdog or FASS. Simply install this fitting in-line for a has..

The XDP Fuel Tank Sump with Built-In Fuel Return XD243 provides you with a perfect option to maximize fuel delivery, and customization when installing your aftermarket fuel system. Avoid the common 1/4 tank issues associated with in-tank draw straws used with fuel systems such as AirDog, FASS and ma..

Cummins replacement fuel injection rail/manifold for 07.5-12 Dodge 6.7L Cummins. Part #4937282 replaces Bosch part #0445226044. Is Part #6 in Image..

Replacement Mopar valve-fuel filter bowl for 2003-2009 Cummins-equipped diesel trucks The image is for representation only...

Single hold down. Quantity 6(six) needed for entire replacement. Cummins OEM. Optional bolts available above. Cummins part number: 5259180..

Cummins CP3 Return Line for the Commonrail 07.5-09 Cummins Item is #3 in the Diagram  ..

Prevent cold weather gelling of your fuel system with BD's PTC Heating element. Sandwiched between the water separator, pre-filter and/or the filter head, the BD fuel heater is perfect for cold weather warriors. The premade wiring harness with sealed electrical connectors offer qiuck and easy instal..

60 Gallon*, extra heavy duty, cross-linked polyethylene fuel tank. New and redesigned for 2012. Tank comes complete with powder-coated or plated steel mounting strap support set, extruded rubber mounting bushings, rollover safety vent valve, shims and needed accessories. For 2500 & 3500 Models with..

Fish Tuning Advanced CP3 Controllers will work with all dual or triple CP3 kits. And yes, it really is as small as it looks, it's only 1" X 1" X 1/2" and easy to hide almost anywhere. Our triple CP3 Controller is hardly bigger - 1 3/4" X 1" X 1/2"..

6.7L Fuel Rail Feed/Supply LineStock feed line from CP-3 to fuel rail inlet. Cummins part number: 4935980 Chrysler part number: 68005436AA   ..

FeaturesPump to Pump Design for Ease of Installation, Better Looks, and More Efficiency Custom Billet Wheel (with optional polishing) Custom Second Wheel Billet Acorn Nut Comes with Hardware and High-Pressure Fitting/Line Comes with Fish CP3 Controller for Reliability and Simplicity Larger ..

Genuine Bosch replacement fuel injection rail/manifold for 07.5-12 Dodge 6.7L Cummins. Includes rail pressure sensor! Part #0445226044 replaces Cummins part #4937282...

This kit is designed to be installed with our 2007.5-2009 Cummins Fuel Distribution Block (FPE-FFD-RF-3G).  It comes complete with all of the high quality AN fittings and push lock hose needed to cleanly plumb your dual CP3s  with our Fuel Distribution Block.Kit Contents:(2) Push Lock CP3 Feed F..

CAT Fuel Filter Kit for 03-18 5.9L/6.7L Cummins Features:Compatible with Dual CP3 Factory WIF Compatible Fuel Pressure Sensor Bung Comes with Plug for Single Supply Applications Billet AluminumFitment Notes:03-09 Trucks Utilize the Fuel Return Pass-Through  10-18 Trucks Do Not Util..

CNC machined stainless Push-Lock high flow fitting for your CP3. This is designed to work with any 1/2" fuel hose and does not require a hose clamp when used with Push-Lock style hose.   G&R Part Number: GRD00169..

Not using the stock fuel filter anymore? Tired of staring at the empty housing under your hood? Then we have the answer for you! The GDP Billet Filter Eliminator. We recieved numerous requests for a solution to remove the stock fuel filter canister after a stand alone filtration system or AirDog ..

Lose that restrictive line from the fuel filter housing to the injection pump and let your fuel system flow at its full potential! The GDP Big Line Kit is an excellent addition to our Raptor Pump Systems. Gain PSI right where you need it, at the injection pump inlet!  The factory fuel line from the..

Prevent cold weather gelling of your fuel system with BD's PTC Heating element. Sandwiched between the water separator, pre-filter and/or the filter head, the BD fuel heater is perfect for cold weather warriors. The premade wiring harness with sealed electrical connectors offer qiuck and easy instal..