2007.5-2009 Dodge 6.7L Cummins Diesel Valve Springs & Cam Upgrades

OEM replacement camshaft for a 2003-2018 5.9 and 6.7l engines This Camshaft has the same lift and duration at .050″ as the OEM camshaft. This cam offers no performance gains. Must use Hamilton cams 1.45″ lifters Hamilton: 07-C-OEM-CR..

Fits: 2007.5-2018 Dodge Ram 6.7L Cummins  The Mahle Exhaust Valve is an OEM replacement exhaust valve for your 2007.5-2017 Dodge 6.7L Cummins. Constructed to meet OE specifications, the Exhaust Valve maintains a factory performance. Exhaust Valve OEM Quality Sold Individually Dir..

Fits: 1989-2018 Dodge 5.9L Cummins 12 Valve The Hamilton Cams 07-C-Retainer Bronze Cam Retainer is a factory style replacement for the thrust plate retainer in your 1989-2018 Dodge 5.9L/6.7L Cummins. Engineered to handle competition use, this cam retainer is durable enough to withstand flow/hig..

Upgrade your Dodge Ram Cummins engine with Power Driven Diesel’s high-quality Tappets. These 24V/12V 1.30″ tappets offer a larger size compared to the factory 12V 1.20″ tappets. With a measurement of 1.30″ and a larger 10mm cup for the pushrod, these tappets provide enhanced ..

  Product is intended for COMPETITION or BILLET CAMS W/ a 1/4 inch Keyway KEY SET, 6B OFFSET -2 THRU +2 DEGREE       For Competition Cams with 1/4" Keyway   SOLD AS KITS ONLY NO-PUNCH=0°, 1-PNCH=1/2°, 2-PNCH=1°, 3-P..

Scheid Diesel Key Set For Cast Cam for 5.9L & 6.7L Cummins engines Includes-  2.6, 1.82, 1.30, & .078 degree offsets. Includes instructions. Scheid Diesel: 1054015014..

Manton 24V Cummins 5.9L and 6.7L high boost replacement valve springs; for use with factory retainers and locksPart number: D105-24V-E..

PLEASE NOTE! There is a 3-5 Day lead Time on this product(Updated 3/6/23)The factory pushrods in your Cummins are designed for factory power and boost levels. As power increases, safeguard your engine with upgraded pushrods. And if you're rebuilding your engine, no time like the present for a big up..

The factory pushrods in your Cummins are designed for factory power and boost levels. As power increases, safeguard your engine with upgraded pushrods. And if you're rebuilding your engine, no time like the present for a big upgrade with a set of Manton Pushrods. These are a stock length pushrod so ..

Our Power Driven 24v stage 1 push rods are a 3/8 push rod that offer an incredible value and performance for your 24v Cummins.. All stage 2 and larger rods are in 7/16″ diameter  They feature hard Drawn 4130/4135 seamless chromoly tubing. The tensile strength of this material is approxima..

These forged bridges are 5% lighter and 200% stronger than the OEM bridges. A cost effective solution to the billet bridges on the market. We have tested these to well over 3,000hp!Hamilton: B-001..

Trust Fleece Performance to bring you the best OE alternative parts you need! Our replacement rocker arm assembly fits 1998.5-2018 Dodge 5.9L and 6.7L Cummins engines. FEATURES Direct fit replacement Meets or exceeds OE specifications APPLICATION NOTES Replaces Cummins P/N: 4995602 Sup..

What’s included:188/220 Camshaft (fits 89-2018 Cummins)Heavy duty pushrods (500-750 hp)103 Valve SpringsLifters/tappetsInformation:RPM Range: 1700-4500Drops EGT 200-300Increased Mid Range powerDuration at .050″ of lift  188 Intake, 220 ExhaustValve springs are meant to prevent valve float and i..

Hamilton Cams Competition Valve Springs allow higher boost and rpm without valve float. Good to 6500 RPM, for competition use.Part number: 07-S-110..

The Industrial Injection Cummins 24 Valve Stage 1 Billet Pushrods are designed to add strength and reliability to your 1998.5 – 2018 Dodge Cummins. For higher RPM and higher boost.FEATURES:– Added Strength– Increased Performance– Good Up To 1000 HP– Stock Length– 3/8″ Diameter– .080″ Wall– 2 Piece D..

Upgrade your Cummins valve springs and retainers with our Fleece Performance spring and retainer kit. Our springs are manufactured from “super clean” Hi-Tensile Chrome Silicon steel with a proprietary multi-step heat treating process that minimizes load loss. These springs have a seat pressure of 10..

Control the valvetrain in your modified 1998.5-2022 Dodge 5.9L/6.7L Cummins with the XDP Heavy Duty High Boost Valve Spring Set XD390. The XD390 Valve Spring Kit is designed to help eliminate valve float due to elevated cylinder pressures and higher boost levels. Common upgrades like aftermarke..

The XDP Rocker Arm Trunnion Set With Polishing Tool XD319 is an upgrade for the often overlooked rocker arm trunnions in modified 1998.5-2018 Dodge 5.9L & 6.7L Cummins engines. The OEM rocker arm trunnions were only made to withstand stock horsepower levels. The additional stress caused by commo..

DLC Coated trunnions are now available for your 1999+ Cummins. These trunnions feature improved oiling to help keep an oil film between the trunnion and the rocker arm as well as DLC coating for additional protection.Other companies relying on Nitriding are trusting sub-standard surface treatme..

98.5-18 Dodge Ram 5.9L & 6.7L Cummins Valve Spring Keeper. Also known as a valve collet. TWO are required per valve. These are sold individually.  Cummins: 3940123..

98.5-18 Dodge Ram 5.9L & 6.7L Cummins Valve Spring Retainer. 24 are required per head, or one per valve. These are sold individually.  Cummins: 3943198..

Includes 1 (one) exhaust/intake valve seal.You will need 24 of these. Superceded Part Number: 3955393 Part number:  4991571..

The Industrial Injection Cummins 24v Billet Rocker Arm Bridges are 3 times stronger than factory counterparts and lighter than the OEM pieces. 12 are required for a full set. Part number: 248608..

The Hamilton Cams 07-C-188/220 Camshaft for your 1989-2018 Dodge 5.9L/6.7L Cummins, has outperformed any other cam that Hamilton has tested against to date, from idle to 4,200 rpm. It is also the largest drop-in cam that Hamilton offers.Use with 64mm or larger single turbos or larger twins. Install ..

Increase performance in the valvetrain of your 1998.5-2018 Dodge 5.9L / 6.7L Cummins with the Hamilton Cams 07-S-003 Valve Springs. Stock springs have 78-82lbs of pressure seat pressure on average at 1.380". If you are over 50psi (boost or drive pressure) and 3,800 rpm, stock springs do not fully co..

Complete Rocker assembly by CNH (Case New Holland). Item is nearly identical to the OE Cummins counterpart. Fits 5.9L & 6.7L Cummins diesels, 1998.5-2018.  Supercedes Cummins part number: 4928698  TOTAL OF 6 NEEDED PER ENGINE Current Cummins number: 4995602CNH: ..

Complete Rocker assembly. Fits 5.9L & 6.7L Cummins diesels, 1998.5-2018.  Superceded part number: 4928698  TOTAL OF 6 NEEDED Cummins: 4995602..

The Hamilton Cams 07-C-178/208 Camshaft is the most efficient cam tested for the 1989-2018 Dodge 5.9L/6.7L Cummins. On a moderate street truck, it will net you the best economy out of all Hamiltom Cams. Due to its short duration and wide lobe separation angle, it also has the least overlap (when int..

BACKORDERED NO ETA (Updated 9-6-24) Colt Cams is proud to introduce our latest grinds for the Cummins 5.9L B series engine! We've worked long and hard to develop these great new profiles. We've dyno'ed some 50 different combinations of durations, lobe separation and installed centerlines to come ..

98.5-12 24V Dodge Cummins Valve Spring Compressor The Cummins Valve Spring Compressor (CVSC010) by Tork Tools, features a tapered design, that reduces the chance of losing a valve keeper. There is nothing more frustrating than losing a valve keeper, especially when you need your Dodge Cummins 24V f..

1998.5-2018 Dodge 24 Valve 5.9L & 6.7L Cummins Extreme duty 750hp and over 7/16", .120" Wall PushrodThe pushrod is a very important and often overlooked component in any high horsepower build. It doesn't have to do a much, just transmit lift from the lifter to the rocker arm, and bend or deflect..

Heavy-duty 4340 chromoly full set of pushrods with billet ends. A must for high-rpm and high-hp engines!Standard length. 03+ 5.9L & 6.7L 24 Valve Commonrail Cummins Diesel...

This is a Cummins factory part. Fits all 12/24 Valve and Common Rail Cummins engines. Cummins part number: 3902332..

These tappets work with all 1989-2018 Dodge Cummins engines. At 1.45" they will not have interference with the Fuel pump eccentric on 12v engines and are much wider than the 1.1" tappets used in early 12v engines. This means they have more surface area to work with our wider lobes which will promote..

98.5-18 Dodge 5.9L & 6.7L Cummins Exhaust Rocker Assembly #6,7,8,9,11,12 in the picture. Cummins: 3937219..

Custom designed Tappets by Colt Cams. Featuring maximum crown or convex surface. This is the #1 feature to guarantee rotation on the Cummins. Over the last few years, we've noticed large inconsistencies in the crown with the current tappets on the market. Some are flat and even dished! Colt Cams add..

98.5-09 Dodge 5.9L & 6.7L Cummins Intake Rocker Assembly #6,7,8,9,10,11 in the picture. Cummins: 3937220..

Fleece Performance Billet Rocker Arm Bridge for 1998.5 + 24v 5.9L/6.7L Cummins (This is a quantity of 12)Fleece Performance part number: FPE-BRAB-C1..

Recommended for high hp, high RPM engine builds running a cast iron cam. They have a larger cam "footprint" at 1.5" than the stock 12 & 24 Valve Cummins Tappet.These tappets have a 1.5" footprint.94-98 Dodge 12 Valve Cummins: These can be used in engines NOT using a fuel pump lobe.98.5-02 Dodge ..

Recommended for high hp, high RPM engine builds running a cast iron cam. They have a larger cam "footprint" at 1.5" than the stock 12 & 24 Valve Cummins Tappet.These tappets have a 1.5" footprint.94-98 Dodge 12 Valve Cummins: These can be used in engines NOT using a fuel pump lobe.98.5-02 Dodge ..

Recommended for high hp, high RPM engine builds running a cast iron cam. They have a larger cam "footprint" than the stock 12 & 24 Valve Cummins Tappet. This tappet has a 1.5" footprint.94-98 Dodge 12 Valve Cummins: These can be used in engines NOT using a fuel pump lobe.98.5-02 Dodge 24 Valve C..

Recommended for high hp, high RPM engine builds running a cast iron cam. They have a larger cam "footprint" than the stock 12 & 24 Valve Tappet. This tappet has a 1.5" footprint.94-98 Dodge 12 Valve Cummins: These can be used in engines NOT using a fuel pump lobe.98.5-02 Dodge 24 Valve Cummins: ..

McBee part number: M-3802924..

Cummins part number: 3802924 Picture for representation only!..

Fits 2003-2007 Dodge 5.9L 24 Valve Commonrail Cummins enginesAlso fits 2007.5-2018 Dodge Ram 6.7L Cummins engines as well. Cummins: 5273413 INCLUDES ITEM #3 PICTURED ONLY. PLEASE CONTACT TO CHECK AVAILABILITY BEFORE ORDERING...

98.5-2018 Dodge 5.9L & 6.7L Cummins Rocker Valve Bridges complete set of 12. #1 in the picture. Cummins: 3943626..

McBee part number: M-4955210..

Cummins part number: 4955210 Picture for representation only!..