-80x80.jpg)
Brand: Cummins
Part Number: 4892795
Using this lower connecting rod bearing directly from Cummins will retain factory fit and function. This is an OE replacement and installs directly into the factory location. Cummins: 4892795..
$34.57
Brand: Mahle
Part Number: MS-2328HX
Mahle h series main bearing set (standard) for 89-17 5.9L & 6.7L Cummins engines. H series bearings were originally developed for nascar type racing but are suitable for all competition engines. Bearings have enlarged chamfers for greater crankshaft fillet clearance; made without flash plating f..
$211.41
Backordered
Brand: Mahle
Part Number: MS-2328H-.026MM
Backordered with No ETA (Updated on 6/3/2025)
Mahle h series main bearing set (standard) for 89-17 5.9L & 6.7L Cummins engines. H series bearings were originally developed for nascar type racing but are suitable for all competition engines. Bearings have enlarged chamfers for gre..
$174.77
Brand: Interstate-McBee
Part Number: M-4955860
89-17 Dodge Ram 5.9L + 6.7L Cummins Interstate McBee Main Bearing Set (.10)Features:
Meets or exceeds original specificationsMade from high quality materialsDirect Fit Replacement
Part number: M-4955860..
$54.69
Brand: Interstate-McBee
Part Number: M-3802073
89-17 Dodge Ram 5.9L + 6.7L Cummins Interstate McBee Main Bearing Set (.30)Features:
Meets or exceeds original specificationsMade from high quality materialsDirect Fit Replacement
Part number: M-3802073..
$48.74
Brand: Cummins
Part Number: 4932375
Using this upper connecting rod bearing directly from Cummins will retain factory fit and function. This is an OE replacement and installs directly into the factory location. FIts cracked cap common rail style rods only. Cummins: 4932375..
$31.87
Brand: Fluidampr
Part Number: 980301
Fluidampr competition diesel series damper for 03-18 5.9L/ 6.7L Cummins is designed for drag racers and sled pullers. The damper has SFI 18.1 specs for competition use. This damper adds additional dampening over the standard Fluidampr. This damper eliminates the accessory pulley which adds mass clos..
$596.70
Brand: Industrial Injection
Part Number: PDM-37xx
Stock Piston Features:
Drop In Replacement
Complete W/ Rings, Wrist Pins And Clips
Available in Std, .020 Sizes
Coated & Chamfered Piston Kit Features:
Drop In Replacement
Compl..
$1,114.48
Brand: Power Stroke Products
Part Number: PP-CUMMINS6.7CSOEM13-19
Do you need to replace the stock crankshaft on your Dodge Ram 6.7L Cummins? Experience a bearing failure and gun-shy to have your crank ground?
You should be, we've seen cranks break with even .010 taken off the bearing surface.
Our partners at Power Stroke Products have just the thing for..
$2,099.00
Brand: D&J Precision Machine
Part Number: DJPCNC100225
The Strongest Billet Cummins Rods On The Market: Upgrade to D&J X-BEAM Billet Cummins Rods for the ultimate in strength and reliability for your high-performance Cummins engine. D&J Precision Machine is the gold standard in the Cummins performance industry.
Proven to handle over..
$3,937.49
Brand: D&J Precision Machine
Part Number: DJPCNC100235
The Strongest Billet Cummins Rods On The Market: Upgrade to D&J X-BEAM Billet Cummins Rods for the ultimate in strength and reliability for your high-performance Cummins engine. D&J Precision Machine is the gold standard in the Cummins performance industry.
D&J stock length ..
$3,569.99
Brand: Wagler Competition Products
Part Number: CRD5.9/6.7
WCP proudly presents their updated heavy duty Cummins connecting rods. These competitively priced connecting rods feature the benefits below –• 100% Made in the USA• Forged by Trenton Forging in Trenton, MI 48183• Forging made from 4340ACQ certified material• All drafting, design, programming, machi..
$3,375.00
Brand: BoostLine Connecting Rods
Part Number: DO7559-575
Since BoostLine's introduction to the high-horsepower world, our patented, 3-pocket design connecting rods have powered many different engines across many different disciplines of racing, from drifting to drag racing. With success in testing and development for up to 2,000HP with our connecting rod ..
$1,974.95
Brand: Wagler Competition Products
Part Number: CRD5.9/6.7+0.080
WCP proudly presents their updated heavy duty Cummins connecting rods. These competitively priced connecting rods feature the benefits below –
• 100% Made in the USA
• Forged by Trenton Forging in Trenton, MI 48183
• Forging made from 4340ACQ certified material
&bull..
$3,475.00
Brand: Wagler Competition Products
Part Number: CRD5.9/6.7+1.00
WCP proudly presents their updated heavy duty Cummins connecting rods. These competitively priced connecting rods feature the benefits below –
• 100% Made in the USA
• Forged by Trenton Forging in Trenton, MI 48183
• Forging made from 4340ACQ certified material
&bull..
$3,475.00
PDP Pick
Brand: Wagler Competition Products
Part Number: CRD5.9/6.7ST
The affordable Wagler Street Fighter Series Cummins 5.9/6.7L connecting rods are the perfect solution for a hot street truck making 1,500 HP or less. The as-forged manufacturing process allows for the strength of forging, yet keeps the cost down by reducing the amount of machining compared to the Co..
$1,950.00
-250x250w.jpg "89-18 Dodge 5.9L & 6.7L Cummins Wagler Billet Main Caps")
Brand: Wagler Competition Products
Part Number: WCPD2403
WCP Billet Main Caps are designed and machined in house
Does not distort when torquing down main studs
Adds strength to the bottom end
Can be used with or without the WCP Girdle
For extra strength add the WCP Street Girdle
Made in the USA
Must be line bored
Part ..
$779.00
Brand: Mahle
Part Number: MS-2328P
1989-2018 5.9L & 6.7L Cummins Mahle Clevite Standard Main Bearings, These come in a complete set.
These bearings are now available COATED by Polydyn. Select option above.
Coating generally takes 3-5 business days, please keep this in mind if you are in a hurry. You can expect 2-3 business ..
$92.24
Brand: Cummins
Part Number: 4955853
1989-2018 Dodge 5.9L & 6.7L Cummins Diesel Main Bearings, Set
Replaces Cummins 3802070
Cummins: 4955853
PICTURE FOR REPRESENTATION ONLY!
These bearings are now available COATED by Polydyn. Select option above.
Coating generally takes 3-5 business days, please keep this in mind if yo..
$258.63
Brand: Mahle
Part Number: SH-1981
2.340" OD STORM Block, Position Number 1, 1997.5 and up
2003 CUMMINS QSB
Engine Designation: QSB 359 CID (5.9 L); 6 4.02"
CUMMINS
359 CID (5.9 L), OHV, 12 Valve; L 6 4.02" (102.0 mm) Bore; VIN: C
For Year(s):; 2003..
$9.97
Brand: Interstate-McBee
Part Number: 6x M-4891178
Includes 6 of #2 in second picture ONLY!
NOTE: NEW STYLE MCBEE BEARINGS NOW HAVE A K GROOVE ON THE OUTSIDE OF THE BEARING THAT DRAWS OIL INTO THE CENTER. THESE WORK ON ALL 5.9L & 6.7L RODS NO MATTER WHERE YOUR OIL HOLE IS LOCATED ON THE TOP OF THE BEARING/RODS.
This item will in most cases N..
$43.80
Brand: Cummins
Part Number: 6x 4891178
Includes 6 of #2 in second picture ONLY!
NOTE: NEW STYLE CUMMINS BEARINGS NOW HAVE A K GROOVE ON THE OUTSIDE OF THE BEARING THAT DRAWS OIL INTO THE CENTER. THESE WORK ON ALL 5.9L & 6.7L RODS NO MATTER WHERE YOUR OIL HOLE IS LOCATED ON THE TOP OF THE BEARING/RODS.
This item will in most ca..
$123.63
Brand: Mahle
Part Number: S42140
Mahle Piston Rings For 07.5-2018 6.7L Cummins (Available in STD & +.020″ & +.040")
Piston rings for single piston. (Need Qty 6 for full set of Pistons)
Mahle part number: S42140
Image for Reference only...
$44.70
Brand: Industrial Injection
Part Number: PDM-06020
2003-2015 Common Rail 12MM Gorilla Girdle W/ Arp Xl Main StudsThis kit includes
1 Gorilla Girdle, 14 top spacers, (large hole)
12 bottom spacers (small hole)
1 rear main spacer bar,
2 rear main stud nuts (12 point),
and 12 main stud nuts (Nylock).
Before you start, READ AND UNDERSTAND THE ..
$1,016.82
Brand: Fluidampr
Part Number: 920321
Fluidampr Harmonic Balancer
For Dodge 07.5-18 6.7L 24 Valve Commonrail Cummins Diesels
A new Fluidampr on your diesel truck will not only protect your engine from destructive torsional vibrations but will also increase TORQUE & HORSEPOWER.
High performance diesel engines running chips and p..
$630.70
Brand: Cummins
Part Number: 3940059
12V/24V/Commonrail Thick Cam Bearing/Bushing
Fits 97.5-2018 5.9L & 6.7L Cummins Storm & Commonrail blocks.
Cummins: 3940059..
$22.20
Brand: Interstate-McBee
Part Number: M-3940059
12V/24V/Commonrail Thick Cam Bearing/Bushing
Fits 97.5-2018 5.9L & 6.7L Cummins Storm & Commonrail blocks.
McBee part number: M-3940059..
$8.55
Brand: Carrillo
Part Number: DC7559HSET
Since 1963, Carrillo is recognized as the preeminent custom connecting rod manufacturer in the world. Carrillo has provided custom and prototype connecting rods to virtually every major automotive and motorcycle venue, most notably to the high performance and speed equipment industry. Whether it is ..
$2,620.80
Brand: Mahle
Part Number: 224-3732
Price is per piston. Must purchase minimum of 6.
Mahle Piston For 6.7L Cummins (Available in STD & +.020″)
For Dodge Ram truck applications. Industrial applications may be different.
Don’t forget to choose your Piston Bore Size and Piston Fly Cutting/Va..
$91.28
Brand: Mahle
Part Number: 223-3717
Mahle Clevite Cummins Wrist Pin Bushing.
For 1989 to 2018 5.9L & 6.7L Cummins Diesels found in PICKUP TRUCKS. SINGLE wrist pin bushing only.
OEM Quality
Sold Individually
Oil hole in top
This item will in most cases NOT work with engines that were found in CAB & CHASSIS trucks.. M..
$9.81
Brand: Cummins
Part Number: 4891178
Cummins OEM Wrist Pin Bushing. For 1989 to 2018 5.9L Cummins Diesels. SINGLE wrist pin bushing only. Click HERE if you are looking for a set.
This item will in most cases NOT work with engines that were found in CAB & CHASSIS trucks.. Meaning 3500, 4500, & 3500 trucks that did not have a ..
$20.60
Brand: Mahle
Part Number: MS-2328H
Grooved Upper Half And Plain Lower Half, Performance, H-Series, Contains Upper Flanged Bearing
Clevite H-Series performance bearings have a medium level of eccentricity, high crush, and a hardened steel back and thin overlay. These bearings are made without flash plating for better seating..
$184.73
Brand: Cummins
Part Number: 3904483
89+ Dodge 5.9L & 6.7L Cummins Crankshaft Gear Dowel
Number 2 from image only.
Cummins: 3904483..
$5.57
Brand: Mahle
Part Number: MS-2328P-.25mm
1989-2018 5.9L & 6.7L Cummins Clevite 10 Undersize Main Bearing Set
Running a 6.7L Cummins and need to grind the crank undersize to clean it up? We don't recommend it, they like to break.
Try to find yourself a new crank shaft instead.
10 under is equal to .25mm
Part# MS-..
$98.96
Brand: Cummins
Part Number: 4376347
07.5-12 Dodge 6.7L Cummins Piston w/Rings
Part number: 4376347 (Old part number 4955365)..
$315.58
Brand: Mahle
Part Number: CB-1873H xx
Mahle Rod Bearings. Standard or .020 Oversize/.25mm available.
Mahle part numbers:
Standard - CB-1873H
.020 over - CB-1873H-25MM
Sold as a pair, 6 pairs needed to do ONE engine. ..
$16.89
Brand: Interstate-McBee
Part Number: 6x M-4943979
NEW Stock replacement Interstate Mcbee fractured cap connecting rods
Includes rod bolts
H-Beam Design
These are NOT a high performance rod. They are an aftermarket stock-replacement connecting rod with similar-to-stock connecting rod horsepower capabilities.
These WILL also work in..
$723.17
Brand: Carrillo
Part Number: DC7559SSET
Since 1963, Carrillo is recognized as the preeminent custom connecting rod manufacturer in the world. Carrillo has provided custom and prototype connecting rods to virtually every major automotive and motorcycle venue, most notably to the high performance and speed equipment industry. Whether it is ..
$2,831.85
Brand: Interstate-McBee
Part Number: M-5257364
Includes rod bolts and wrist pin bushings
McBee part number: M-5257364..
$79.27
Brand: Cummins
Part Number: 5257364
Includes rod bolts and wrist pin bushings
Cummins part number: 5257364..
$254.92
Brand: Interstate-McBee
Part Number: M-4943979
NEW Stock replacement Interstate Mcbee fractured cap connecting rod, Single Rod! CLICK HERE if you want entire set.
Includes rod bolts
H-Beam Design
These are NOT a high performance rod. They are an aftermarket stock-replacement connecting rod with similar-to-stock connecting rod horsepower..
$120.53
Backordered
Brand: Interstate-McBee
Part Number: M-4955-RINGS-6.7
Backordered until July (Updated 6/3/25)
1 Set needed per piston, order 6 of these if you need rings for every piston.
Interstate-McBee part numbers:
M-4955366 (Standard)
M-4955480 020 (20 over rings)
ONLY includes piston ring set, for 1 piston...
$29.84
Brand: Mahle
Part Number: 224-3732WR.020
Full set requires 6 pistons.
07.5-18 Dodge 6.7L Cummins Mahle Piston w/Rings 20 Over Bore (AFTERMARKET)
Part Number: 224-3732WR.020
..
$279.43
Backordered
Brand: Mahle
Part Number: CB-1873AP-.50mm
Backordered (Updated on 6/3/2025)
Mahle Rod Bearings. .020 Undersized or .50mm
Fits cracked-cap Commonrail style rods only.. Usually found in 2003-2018 5.9L & 6.7L Cummins engines.
Includes part number:
CB-1873AP-.50mm, single bearing pair for one connecting rod. Fits fractured..
$11.76
Brand: Mahle
Part Number: 224-3732WR
Full set requires 6 pistons.
07.5-18 Dodge 6.7L Cummins Mahle Pistons w/Rings Std Bore (AFTERMARKET)
Part Number: 224-3732WR
..
$267.16
Brand: Interstate-McBee
Part Number: 6xM-4932375/6xM-4892795
Fits cracked-cap Commonrail style rods only. Usually found in 2003+ 5.9L & 6.7L Cummins engines. This is for a full set of 12
Fitment note: .010 Over
These bearings are now available COATED by Polydyn. Select option above.
Coating generally takes 3-5 business days, please kee..
$48.86
Brand: Interstate-McBee
Part Number: 6x M-3969562/6x M-4893693
Fits cracked-cap Commonrail style rods only. Usually found in 2003+ 5.9L & 6.7L Cummins engines. This is for a full set of 12
These bearings are now available COATED by Polydyn. Select option above.
Coating generally takes 3-5 business days, please keep this in mind if you are in a hurry. You ..
$49.03