Dodge Ram 5.9L Cummins Fuel Related Parts

This fuel water separator drain valve is designed to match the fit and function of the original valve on specified vehicles, and is engineered for durability and reliable performance.Direct replacement - this fuel water separator drain valve is designed to match the fit and function of the original ..

Cummins 12 valve and 24 valve lift pump block off plate.  Covers the hole on 89-98 12 Valves that would normally have a lift pump bolted into it. Allows you to eliminate the lift pump bracket on 98.5-02 24 Valve Cummins trucks.03-18 trucks, this blocks off the ccv breather drainback port.   O-ring ..

Fits: 1998.5-2002 Dodge 5.9L Cummins This DDP 9802CON Fuel Injector Connector Tube is the perfect component for your truck. This is a stock replacement and fits on 1998.5-2002 ISB Engines.  DDP: 9802CON..

Have you upgraded from your factory mechanical lift pump to an electric pump? This block off will eliminate the void left by your stock pump. Complete with bolts, cover, and o-ring.Fleece Part Number: FPE-CUMM-FBOP..

Fuel supply tube. This is the steel line that runs up to the fuel filter from the lift pump outlet. Genuine Cummins part. 3918880, 04761978. May also work on other 6BT Cummins with P7100 pump. Part Number: 3918880..

Black anodized lift pump block off fits Cummins 12 valve and 24 valve. O-ring groove machined into back side.  No need for leaking gaskets. Comes with stainless bolts and o-ring to seal it to the block.Keating: 020415-1-Black..

Dodge '00-'02 Tank Level Sender (OEM) Includes sender & o-ring for the top of the tank. NOTE: If the lift pump has been changed out to the in-tank pump you will need part number 497670AB. Chrysler: 4897669AC Superceeded:  4897669AB (0489 7669 AB)..

12mm banjo bolt to 3/8" pushlock adapter fitting.Add on the optional high flow 12mm x 1.5 banjo bolt and seals for a complete kit. (PDPHF12MM) Part Number: PDP1438..

The XDP Fuel Tank Sump XD182 is the perfect solution for those wanting to maximize fuel delivery to their engine. This One Hole Design Fuel Tank Sump is easier to install than others on the market, and it only requires one hole in your fuel tank!The XD182 provides an outlet for fuel on the bottom of..

Weld on fuel pump drive hub to drive Waterman or similar pump off the auxiliary / power steering pump gear. Fits 1994 to 2002 Cummins 5.9L engines. 3/8″ hex. Used on recessed face gears only. Two of the pictures show the gear that this drive was designed for. Gear not included. Gears have a differen..

BD Power 1040281 Injector Connector Tubes for your 98.5-02 Dodge 5.9L Cummins are stock replacement tubes that are often replaced when installing new injectors. Sold as a set of 6   Not Available in California BD Diesel Part number: 1040281..

Genuine Bosch replacement VP44 injection pump gear nut.Bosch: 1463395004..

Genuine Bosch replacement VP44 injection pump lock washer. Bosch: 2916699169 Superseded Bosch: 2916699139..

12 point "Bi-hex" wrenches for service on:Common Rail Injection SystemsPower steering linesExpansion valvesA/C linesHydraulic linesIndustrial equipmentFuel filter linesMercedes & Sprinter Diesel Common Rail Injection SystemsKit includes the following sizes:2220X14 – 14mm2220X17 – 17mm2220X19 – 1..

Backordered with No ETA   **Updated on 03/05/2024** The Draw Straw™ 3 Is the threaded version of the original DS2 for use with plastic or metal tanks in Dodge, Ford and GM trucks. This unit is a single port billet aluminum bulkhead fitting that requires a 3/4" hole to be dri..

Anodized billet aluminum Y-fitting with barbed ends for pushlock hose.  Fleece Part Number: FPE-FIT-Y06-BLK  ..

Anodized billet aluminum Y-fitting with barbed ends for pushlock hose.  Fleece Part Number: FPE-FIT-Y08-BLK..

Fuel Sump Features: • 1/2" NPT Outlet Port • 1/2" NPT Return Port With Stand Tube  • Fully Functional Water Separator Sump • Does not require removal of fuel tank • Made in USA RCD: RCD-0000490001..

The XDP Mechanical Fuel Pump Block-Off Plate will add a custom look under the hood while blocking off the unsightly hole on the side of the engine block in your Dodge 5.9L Cummins. This Block-off plate features a billet aluminum construction design. It contains a built-in o-ring gasket to ensure a p..

The XDP Push-Lock Fuel Pressure Tee XD200 is machined from aluminum with a pre-drilled & tapped 1/8" NPT port to accept a fuel pressure sender or hose. The 1/2 Push-Lock fitting makes it ideal for use with aftermarket fuel systems such as Airdog or FASS. Simply install this fitting in-line ..

This kit includes everything for bolt on installation of your Fass Lift Pump.Part number: NDB-1001..

This is Full Send Diesel's 1998.5+ Dodge Cummins FASS Fuel System/ SUMP DIY Install Kit. This Kit includes everything you need to plumb you fuel system with AN fittings and hose when installing your FASS fuel system and Beans Diesel Dual Port Sump if you choose to do so. The rubber hoses that come w..

1/2" Push-Lock To 1/2" Bead Fitting   FASS: PLB-1212  ..

Prevent cold weather gelling of your fuel system with BD's PTC Heating element. Sandwiched between the water separator, pre-filter and/or the filter head, the BD fuel heater is perfect for cold weather warriors. The premade wiring harness with sealed electrical connectors offer qiuck and easy instal..

Prevent cold weather gelling of your fuel system with BD's PTC Heating element. Sandwiched between the water separator, pre-filter and/or the filter head, the BD fuel heater is perfect for cold weather warriors. The premade wiring harness with sealed electrical connectors offer qiuck and easy instal..

When installing a bottom sump with your AirDog or Fass Pump most trucks end up with an open fuel supply and or return line. G & R Diesel's 1/2" or 3/8" aluminum plug will cap off these lines with ease, to keep fuel from seeping out of them and dirt from getting into your fuel tank. You no longer hav..

NO MORE QUARTER TANK FUEL PROBLEMS! NO MORE DRILLING HOLES IN YOUR FUEL TANK TO INSTALL AN AFTERMARKET PICKUP TUBE OR DRAWSTRAW! This kit works on all 2005-2009 trucks that have the in-tank lift pump. This will also work on 98.5-04.5 trucks that have had their fuel lift pump re-located to the fu..

One of the most critical parts of your truck is it's fuel system!  Do not just let your FASS or AirDog hang down from your frame and be exposed to road, tire, and field hazards!  We have created a completely new mounting system for your FASS or AirDog that compliments an already great fuel system. ..

The XDP Fuel Tank Sump with Built-In Fuel Return XD243 provides you with a perfect option to maximize fuel delivery, and customization when installing your aftermarket fuel system. Avoid the common 1/4 tank issues associated with in-tank draw straws used with fuel systems such as AirDog, FASS and ma..

Fleetguard replacement fuel canister drain valve. Part number:  395945300 SCan also replace the Cummins part number 3959453S Replaces Mopar: 5015580AD..

This Pure Diesel Power's CNC Machined Fuel Filter head designed for the 89-02 Cummins 5.9L. This fuel filter comes standard with a port for a 1/8" NPT fuel pressure sensor to work alongside your fuel pressure gauge. A 1/8" NPT plug comes standard with the kit if you do not have a gauge for..

This is the stock steel fuel return line that runs from the VP44 injection pump to the T fitting. Includes #8 in the picture ONLY! Cummins: 3945707..

Oversize Fuel Injection Lines for the Dodge 5.9L 24 Valve Cummins Diesel Mild Steel is available in .078, .084, & .093, select belowStainless steel is available in .093 & .120, select below. 1998.5-2002 Engines  Set of 6 injection lines. CLAMPS ARE INCLUDED UNLESS SELECTED ABOVE.Stoc..

Please tick the box to select the pieces you need. See second image Cummins part numbers: Number 1 - part number 3093956 - Screw, Hex Number 2 - part number 3903035 - Screw, Banjo Number 3 - part number 3905353 - Tee, Male Number 4 - part number 3963983 - Washer, Seal Number 5 - par..

Genuine Bosch Part VP44 Overflow Valve Does not come with sealing washers. If you need them included, please add them above. Part number:  1467445003..

Direct from Cummins, OE factory replacement fuel injection lines. Please choose lines needed above. Line # Part # Line 1 3943765 Line 2 3943767 Line 3 3943..

98.5-02 Dodge Cummins 12mm Banjo Washer Item #5 in the second picture ONLY. Cummins part number: 3963983..

HIGH PERFORMANCE - HIGH FLOW BULLET PROOF 12MM X 1.5 BANJO BOLT with a pair of sealing washers.  We search the diesel forums looking for problems that could be solved with a new product. One complaint that caught our attention is the poor quality of high flow banjo bolts on the ma..

This is the stock steel fuel return line that runs from the T fitting down. Includes #7 in the picture ONLY! Cummins: 3942592..

This is the stock steel fuel return line that runs from the Cylinder Head to the T fitting. Includes #9 in second picture ONLY! Cummins: 3942966..

By: Hellmann PerformanceSick of 1/4 tank or lower fuel supply issues with a suction tube? Park on a hill with low fuel and now your truck won't start? (with stand tube) This is the solution! The Hellman Fuel Tank sump mounts on the bottom of your fuel tank and give you the lowest possible point to ..

Includes #2 in the picture ONLY! Cummins: 3903035..

This is the stock steel fuel return line tee fitting. Includes #3 in the picture ONLY! Cummins: 3905353..

Check valve for the return line at the vp. Item #6 in the Picture. Part: 3941156..

This is number 3 fuel line only. (#24 in image)   Cummins Part Number: 3943769..

Bosch Stock Diameter injector connector tube. This tube transfers fuel from the out side of the cylinder head to the injector body. Over time, vibration causes the injector to wear into the body of injector and the tip of the crossover tube also wears. We recommend replacing these tubes if you are i..

One each of 3902023 (number 6 in image) and 3940817 (number 5 in image). Contains these two bolts only, nothing else from image is included. For one injector only. Fits 1998.5 to 2002 Dodge 5.9L Cummins diesels...

This is number 1 fuel line only. (#17 in image)   Cummins Part Number: 3943765..