Pure Diesel Power, your number 1 diesel performance parts source!

Pure Diesel Power Price Match

live chat service provider

PDP Phone Number

PDP Email Signup

Shop By Brands all1-9ABCDEFGHIJKLMNOPQRSTUVWXYZ

Free shipping on all orders over $150! Free Shipping on orders over $150! *Exclusions Apply

Air Intake Systems

Air intake systems for the 1998.5-2002 Dodge 5.9L 24 Valve Cummins powered diesel trucks.

We offer top air intake brands such as AFE & S&B.

High flow performance air intakes & filters allow your engine to breathe, resulting in better low-end power, faster turbo spool-up, lower egt's, and better fuel economy! 

From AFE, AFE

The "Inverted" design of this unique OE replacement filter fully utilized the space in the stock air box to provide the most filter media of any "drop-in"...


The Tymar filter originated when it was noticed that the stock air box has a poor seal design and is a fairly restrictive system. Once you add modifications...

+

From S&B Filters, S&B Filters

100% Machine Cut & TIG Welded

S&B chose to manufacture our Intake Elbows out of cast aluminum because you need a part that delivers extreme performance without the risk of it bursting in the field. While we too liked the idea of using a composite material to make our elbows, trust us, it’s not worth the risk. 

Improvement in Airflow-

32.6% - 98-02 Dodge Cummins 5.9L

 

+

From Pusher, Pusher

The Pusher 3.5" MEGA Intake System with Passenger Side Intercooler Tube for your 98.5-02 Dodge 5.9L Cummins replaces all of the 3” factory pre and...


From Crazy Carl's, Crazy Carl's

Another Crazy Carl original product! The Tunnel Ram is a patented intake for the Dodge Cummins diesel engine. It's unique design increases the airflow...

+

From Pusher, Pusher

The Pusher Aluminum Intake Manifold with Intercooler Pipes for your 98.5-02 Dodge 5.9L Cummins increases flow, power, performance and engine efficiency....


Arctic Air Intake Manifold Airhorn for Dodge Cummins 1998.5-2002 5.9L Based on technology used in NASCAR air tubes. Elogating through the curve eliminates...

+

From Pusher, Pusher

Pusher 3" aluminum intake manifold for Cummins 5.9L turbo diesel engines in 1998.5-2002 Dodge Ram pickup trucks.
 
Features:
  • All Pusher Intakes can be used with or without the factory heater grid.
  • Production Process: After refining the design and fabrication process, we are proud to offer these intakes made from; All TIG welded, 3” 6061-T6 mandrel bent tubing, with water jetted 1/2" flange and 1/4" dipstick mount. All intakes come standard with two 1/8 inch NPT ports on the back for methanol/water injection, a boost gauge, etc.
  • For an additional charge, select powdercoating colors are available on this manifold.
  • Custom colors and semi custom modifications are available as well, just ask!
 
Specs:
  • All 6061-T6 Aluminum construction consisting of, 3" mandrel bent tubing, water jetted 1/2" flange and 1/4" thick dipstick mounting bracket. Fully TIG welded with precise settings to produce optimal penetration without impacting airflow.
  • 50-200 degrees F drop in EGT's
  • .5-1 MPG increase
  • Increased throttle response
  • Faster turbo spool
Pusher part number: P24vAlum


From Pusher, Pusher

3" steel tubular intake horn for Cummins 5.9 liter turbo diesel engines in 1998.5-2002 (2nd gen.) Dodge Ram pickup trucks.
 
Features:
  • All Pusher Intakes can be used with or without the factory heater grid.
  • Production Process: After refining the design and fabrication process, we are proud to offer these intakes made from; All TIG welded, 3” 6061-T6 mandrel bent tubing, with water jetted 1/2" flange and 1/4" dipstick mount. All intakes come standard with two 1/8 inch NPT ports on the back for methanol/water injection, a boost gauge, etc.
  • For an additional charge, select powdercoating colors are available on this manifold.
  • Custom colors and semi custom modifications are available as well, just ask!
 
Specs:
  • Full steel construction consisting of, 3" mandrel bent tubing, laser cut 1/2" flange and 1/4" thick dipstick mounting bracket.
  • Fully TIG welded with precise settings to produce optimal penetration without impacting airflow.
  • 50-200 degrees F drop in EGT's
  • .5-1 MPG increase
  • Increased throttle response
  • Faster turbo spool
 
Pusher part number: P24vSteel


From Pusher, Pusher

Full 3.5" post intercooler intake system for Cummins 5.9 liter turbo diesel engines in 1998.5-2002 Dodge Ram pickup trucks.
 
Features:
  • The MEGA Intake System replaces all of your 3” factory post intercooler plumbing and intake manifold with 3.5” mandrel bend tubing. It replaces all of your factory boots and clamps with top quality silicone couplers and stainless T-clamps. The manifold is fitted with a half inch thick CNC laser cut flange and a total of 4 1/8” NPT ports to handle any combination of sensors and injectors. If you’d like a different configuration or quantity of ports, just let us know. We also offer the entire system powder coated any of our standard colors. On top of all that, we made this system capable of being run with or without the heater grid, just like our other manifolds.
  • For an additional charge, select powdercoating colors are available on this manifold.
  • This intake comes with instructions, a factory Cummins gasket, factory Cummins bolts where possible, and port plugs.
  • Custom colors and semi custom modifications are available as well, just ask!
Specs:
  • Full steel construction consisting of, 3.5" mandrel bent tubing, laser cut 1/2" flange and 1/4" thick dipstick mounting bracket.
  • Fully TIG welded with precise settings to produce optimal penetration without impacting airflow.
  • 50-200 degrees F drop in EGT's
  • .5-1 MPG increase
  • Increased throttle response
  • Faster turbo spool
Pusher part number: P24vMega


From AFE, AFE

With two layers of progressively finer mesh synthetic media between 100% polyurethane top and base, this high flow, “oil-free” conical performance filter provides maximum convenience and easy maintenance with excellent airflow. Washable and reusable for multiple cleanings, the tall open evenly spaced pleats provide excellent dust holding capacity for longer service cycle between cleanings. Pliable polyurethane flange with integrated bumps insures tight, no leak seal over the life of the filter.

Dimensions: 6 F x 9 B x 7 T x 9 H in

Afe Pro Dry S Replacement Filters For Intake Kits Ending In 10072 10932

+

From AFE, AFE

Features: • Pro 5R Factory-Oiled Media for Maximum Performance • This filter is a direct replacement for the Donaldson ECB085011 paper...

Up