Solid Steel LTD Adjustable Track Bar Retrofit Kit - 94-02 Dodge Ram 4x4

The Solid Steel LTD 3rd Gen Style Adjustable Track Bar with Retrofit Kit is a direct upgrade solution for 1994-2002 Dodge Ram 4x4 trucks, eliminating the ball-joint-style upper frame connection that commonly wears out on second-gen Dodge trackbars. This kit allows you to run a 2003-and-up factory-style Dodge trackbar with rubber bushings on both ends - the same design change Dodge made from the factory starting in 2003 - and the adjustable bar centers the front axle with lifts up to 3 inches.

Why This Retrofit Solves the 94-02 Trackbar Problem

The factory 1994-2002 trackbar uses a rubber bushing on the lower axle end and a ball-joint-style connection on the upper frame end. That upper joint behaves like a tie-rod end, and it wears out. Starting with the 2003 model year, Dodge switched to a trackbar design with rubber bushings on both ends - and trackbar wear on those trucks stopped being a recurring problem.

This Solid Steel LTD kit retrofits your pre-2003 truck to accept the improved 2003-and-up style bar. The result: smooth, quiet steering with correctly engineered bushing deflection that absorbs road input without sending vibration back through the wheel or wearing out rapidly like urethane or steel rod ends do.

The bar is fully adjustable while installed, making axle centering with lifts up to 3 inches straightforward without pulling the bar off the truck. If your fitment matches and your truck is a 94-02 4x4, this is the correct retrofit path to order.

What the Bushing Design Change Actually Does

Solid Steel Industries developed these rubber bushings in conjunction with a chemist and a rubber bushing manufacturer specifically for this application. The hardness of the bushing is calibrated to eliminate the spongy steering feel found in softer aftermarket rubber, while still providing the right amount of deflection to absorb road input and prevent hammering and premature wear.

Steel rod ends, Heim joints, and urethane bushings all transmit more road noise and vibration to the steering wheel and can hammer against the mounting point over time. The rubber compound used here is engineered to avoid both failure modes - the slop of worn-out urethane and the harshness of metal-on-metal joints - while keeping the bar quiet under daily driving and towing loads.

What Comes in the Kit

• Adjustable 3rd Gen style track bar (powder-coated finish)
• Retrofit hardware to accept the 2003-and-up style bar on 1994-2002 frame mounts
• All mounting hardware required for installation
• Premium rubber bushings engineered for this application

All mounting hardware is supplied - no separate hardware purchase is required for the core trackbar installation described above.

If your year, drive configuration, and part number match, verify the snow plow note above, then this is the correct trackbar kit to order.

Fitment Coverage - 94-02 Dodge Ram 4x4

This kit covers the full second-generation Dodge Ram 4x4 range for 2500 and 3500 trucks, and the Ram 1500 4x4 through 2001.

• 1994-2002 Dodge Ram 2500 4x4
• 1994-2002 Dodge Ram 3500 4x4
• 1994-2001 Dodge Ram 1500 4x4

This kit does not apply to 2003 or newer trucks, and it is not for 2WD applications. If your truck is a 2003-and-up Ram, the factory trackbar already uses the rubber-bushed design this retrofit is meant to replicate.

Avoid These Common Mistakes

• Ordering for a 2WD truck - this kit is for 4x4 applications only.
• Ordering for a 2003 or newer Ram - the factory bar on those trucks already uses rubber bushings on both ends.
• Ordering without checking your snow plow mount - the bar may interfere with certain plow mounting setups.
• Expecting the bar to center an axle with a lift over 3 inches - the adjustment range is rated for lifts up to 3 inches.
• Overlooking potential import costs - this item ships from Canada and tariffs or import taxes may be charged at delivery.

Final Checklist Before Ordering

• Truck is a 1994-2002 Ram 2500/3500 4x4, or 1994-2001 Ram 1500 4x4
• Lift height is 3 inches or under (or truck is at stock ride height)
• No snow plow mount conflict confirmed
• Comfortable with potential import tariffs or taxes from Canada at delivery

For a 1994-2002 Dodge Ram 4x4 with a worn upper trackbar joint or an off-center axle after a lift, part numbers DAT3029402-4 and TBK2029402-4 are the correct retrofit trackbar kit to order. If you want the same result without potential import fees, the BD Power Adjustable Track Bar Kit ships domestically.

Frequently Asked Questions