-750x750w.jpg)
88-02 Dodge 5.9L Cummins CrankCase Breather Relocation Kit
- Part Number: 8802CCVKit
- Est. Ship Time: Usually Ships By Next Business Day
$245.00
More from this brand
Starting From $115.00
Starting From $225.00
Starting From $105.00
Starting From $59.00
Tired of spots on your driveway, oil on your radiator, an oily mess in your engine compartment?
Give the Cummins Breather Kit a try!
Works on all Cummins Engines and Dodge Cummins 5.9L 1988 - 2002. Complete kit with everything you need to install. Installs in under 1/2 hour.
Bottle Dimensions: 3.125" diameter, 6.5" tank height (without filter)
Functions:
- Replaces the blow by tube
- Captures the oil that would normally exit via the blow by tube
- Can be drained as required
Kits comes with all necessary equipment
- 10 feet of oil resistant hose
- Oil resevoir
- Breather complete with push-on connections for ease of installation
- Zip straps
Simply mounts to frame and hoses get ran to unit. Does NOT include install instructions.

Tired of spots on your driveway, oil on your radiator, an oily mess in your engine compartment? Give the Cummins Breather Kit a try!
Works on all Cu..
$245.00
Easily access your engine's oil filter by installing Pacbrake's oil filtration relocation kit. A remote oil filter is most beneficial for those who ha..
$276.15
Easily access your engine's oil filter by installing Pacbrake's oil filtration relocation kit.
A remote oil filter is most beneficial for those who h..
$273.47
Easily access your engine's oil filter by installing Pacbrake's oil filtration relocation kit. A remote oil filter is most beneficial for those who ha..
$276.15
Allows for clearance of a roller-lifter setup.
TAPPET COVER, BILLET ALUMINUM
HAVING PROBLEMS KEEPING TAPPET GALLEY SEALED?..
$467.00
This kit involves removing the rear freeze plug from the block and bolting a plate over it (shown in picture) and running a 5/8 ID coolant hose t..
$148.21
Contact to Confirm Availability!Includes standard thickness AFTERMARKET 12 valve Cummins gasket modified for the use of fire rings.
Requires the mac..
$255.00
Snap On 89-07 Dodge 5.9L Cummins Engine Barring Tool
Used to rotate the engine for making valve and injection pump adjustments on Cummins and J.I. Ca..
$159.95
Set of 12 Rocker Arm Studs 98.5+ Dodge 5.9L & 6.7L Cummins Diesel
Torque these to 27 Ft/Lbs.
Washers are NOT Included in this Kit
Please allow 1-..
$151.99
98.5-02 Dodge 24 Valve 5.9L Cummins DieselKiller Dowel Pin Repair Kit (KDP)
Includes:Crank SealDowel PinDowel Pin TabRTV Sealant
THIS KIT DOES NOT C..
$224.95
Includes Cummins part numbers: 1x 3903463 Cover1x 3903475 Rectangular Seal
Also known as:Oil filler plug eliminator, Oil filler delete, or oil f..
$28.93
PISTON KIT, 24 VALVE, STOCK REPLACEMENT, AFTERMARKET 24 VALVE CUMMINS1998.5 - 2002AVAILABLE IN 3 BORE SIZESSTD+.020 (.50MM)+.040 (1.00MM)KIT INCLUDESP..
$115.69
'98.5-'02 Dodge 24 Valve Cummins Diesel Oil Pressure Sending Unit
Cummins: 4326849..
$110.29
Fuel Pressure Snubber, eliminates fuel pressure gauge "vibration".
Required for installation of 30 psi Fuel Pressure gauges on Dodge Cummins Diesel A..
$32.13
AutoMeter Z Series Electric Fuel Pressure Gauge 0-30 PSI Includes Sender, Stepper Motor TechnologyFull Sweep, Stepper Motor meter movement. Includes 1..
$305.80
Limited Availability!This outlet elbow is the same elbow that comes stock on all 94-02 Dodge 5.9L Cummins Diesel Trucks.
One end clamps on with a v-..
$139.23
Cummins: 3069053
Clamp ONLY...
$46.03
Set of eight(8) flex plate bolts for 1989 to 2018 5.9L & 6.7L Dodge Cummins with automatic transmission.
Cummins part number 3908522..
$61.76
Cummins: 3883284
Includes item #3 in second picture ONLY!..
$8.90
4000 RPM Governor Spring Kit (4K GSK)The Peak Diesel Governor Spring Kit is a special combination of springs and Piers' unique design on seats.This ki..
$115.00
4000 RPM Governor Spring Kit with 12 Heavy Duty Valve 60lb Springs
The Peak Diesel Governor Spring Kit is a special combination of Bosch springs and..
$225.00
3000 RPM Governor Spring Kit (3K GSK)
This kit allows your engine to have full fueling to approximately 3000RPM, which greatly improves the driving e..
$105.00
The AFC Spring Kit allows you to achieve a good compromise of minimal smoke under acceleration with responsiveness. Kit Includes- Medium and light AFC..
$59.00
DISCONTINUED (7-31-23)Are they purdy? Nope, but they'll hold 60 pounds of boost and they are made in the good old U.S.A. Not knock-offs like most othe..
$0.00
OUR KIT CONTAINS:
RTV SENSOR SAFE ULTRA GRAY GASKET MAKER
KDP TAB
FRONT SEAL
LOCKTITE
The Killer Dowel Pin is responsible for more hear..
$69.00
DISCONTINUED
94-02 Dodge Hi-Performance Upper Intercooler Boot
Fits 94-02 Dodge
Replaces OEM intercooler boot
4-Ply brick red Aramid Fibe..
$0.00
DiscontinuedIdeal for transitioning from 4" turbo inlet to 3" cold pipe in twin turbo set up
4-Ply brick red Aramid Fiber with Black Matte finish c..
$0.00
DISCONTINUEDApplication: 03-07 Dodge Ram Cummins 5.9L DieselPerformance Intercooler Boot & Clamp KitSuperior material, stays on, holds more ..
$0.00
DISCONTINUEDApplication: 03-07 Dodge Ram Cummins 5.9L Diesel07.5-2009 6.7L Cummins
Performance Turbo to Intercooler tube connector boot & 2..
$0.00
DISCONTINUEDPeak Intercooler Boot & Clamp Kit
Application: 94- 02 D..
$0.00
Voided Mounts?When Dodge created the motor mounts for your Ram they designed them with holes, or voids, in them. These voids give the mounts the abili..
$124.99
Bean Machine valve covers are designed to
stand out, not only from the stock vc, but also from any other valve cover on
the market. These valv..
Starting From $952.88
Clean up the engine bay of your 1998.5-2023 Cummins with this Billet Aluminum Black Anodized Oil Fill Cap from WCFab. This is a complete cap, not a co..
$57.23
Clean up the engine bay of your 1998.5-2023 Cummins with this Billet Aluminum Clear Anodized Oil Fill Cap from WCFab. This is a complete cap, not a co..
$57.23
Fits: 1989-2002 Dodge 5.9L Cummins This cover works with VE, VP and P-Pump Cummins engines. Forget cutting or grinding! We've included an interna..
$317.63
Fits: 1994-2002 Dodge 5.9L Cummins The Moroso 20855 Engine Oil Pan is a drop-in replacement for rusted, cracked, or leaking oil pan in your 1994-..
$394.99
Fits 1998.5 to 2002 Cummins 24 valve engines equipped with VP44 injection pumps. Includes o-ring to seal against block and stainless hardware. Now ava..
Starting From $249.95
Fits 1998.5 to 2002 Cummins 24 valve engines equipped with VP44 injection pumps. Includes o-ring to seal against block and stainless hardware. Now ava..
Starting From $259.95
This is our 24 valve Cummins billet tappet cover. It is a direct replacement for the original prone to leak tappet cover. This cover is made from a on..
$367.38
Cummins front engine lifting bracket for 98.5-02 5.9L Cummins.Cummins: 3943215..
$30.07
Backordered with No ETA **Updated on 08/24/2023Full Send Diesels one of a kind
brake fluid reservoir cover is the perfect way to dress u..
$174.99
Cummins Oil Cooler for 1998-2002 Dodge Cummins diesels is now available at Pure Diesel Power. This Oil Cooler is 100% leak tested from the factory and..
$977.00
Backordered with No ETA **Updated on 09/20/2023**Having issues with your 4 wheel drive engaging only when it wants to?Are your vacuum lines oil..
$35.95
Backordered til End of September **Updated on 08/28/2023**This is the cable that runs from the VP44 throttle linkage down to the side of t..
$92.93
PURE DIESEL POWER BRANDED BILLET TAPPET COVER
These come standard raw, if you would like it polished (shown in image) please select above.
Breather ..
$289.00