-80x80.webp)
98.5-07 5.9L Cummins Economy Grid Heater Delete
$39.99
- Part Number: 504123408
- Est. Ship Time: Usually Ships By Next Business Day
SSL SECURE
TRANSACTION
AUTHENTIC
PRODUCTS
GUARANTEED PREMIUM
QUALITY
A+ Rating
More from this brand
Starting From $51.84
-60x60.webp "89-18 Dodge 5.9L & 6.7L Cummins CNH Front Crank Seal")
Starting From $20.05
Starting From $122.85
Starting From $117.33
Replaces factory heater grid on 98.5 to 2007 Dodge Cummins engines. Adds more air flow to engine.
Part number:HELGRIDDELETE..
$62.00
89-98 One Piece Grid heater plenum & plate.
Factory direct.
Cummins part number: 3926381
Number 3 in image...
$1,357.93
The Alliant Intake Grid Heater Gasket pair for your 1989-2007 Dodge 5.9L Cummins is a direct replacement for your factory gasket. These are used at th..
$18.46
Looking to delete your grid heater and aren't making big power? This "economy" grid heater delete fits the bill!
Made of PA6 (polyamide 6..
$39.99
All Models with Getrag or NV4500 Transmission..
$9.99
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.
High flow, smooth mandrel bent, 100 percent stainless stee..
$184.00
DODGE RAM 1500 94-01 / RAM 2500/3500 94-02/ RAM SPORT MODEL 94-98 CRYSTAL HEADLIGHTS BLACK w/ CORNER LIGHT 2PCSpecificationsSKU111067Comment/Foot Note..
$245.00
Hot
Fits 89-93 Dodge 5.9L Cummins Diesel Trucks
This fuel filter stud is used to delete fuel heater on 1st gen Cummins (89-93)
Part number: J925954
..
$15.99
Replacement UPGRADED Fuel and Water Separator for 89-93 1st Generation Dodge 5.9L Cummins diesel trucks!
Much larger, almost twice as tall!
..
$17.99
Injector connector tube o-ring set for a 5.9L Cummins with a VP44 Injection Pump
6x Cummins part number 3867043...
$28.20
5.9L 24 Valve Commonrail & 6.7L Cummins 6BT Oil Pump. This pump has straight cut gears. It will not work on a 2002 or older Cummins.
Fits:0..
$255.30
O-ring that goes between the VP44 Pump and Gear Case.
For 1998.5-2002 5.9L Cummins.
Cummins part number: 3935032
Image is of general o-ring, for re..
$5.44
Cummins 12 valve and 24 valve lift pump block off plate. Covers the hole on 89-98 12 Valves that would normally have a lift pump bolted into it...
$22.95
This is a Cummins factory part. Fits all 12/24 Valve and Common Rail Cummins engines.
Cummins part number: 3902332..
$12.19
98.5-02 Dodge Cummins 12mm Banjo Washer
Item #5 in the second picture ONLY.
Cummins part number: 3963983..
$4.73
Mahle replacement front crank seal with integrated repair sleeve.
Mahle part number: 48383..
$37.11
When the Government mandated tougher emission regulation one of the ways diesel engine manufacturers lowered tailpipe emissions was to include a Diese..
$15.99
Includes thermostat only, with seal ring.
Image for reference only.
Cummins part number: 5292742..
$68.36
ARP Harmonic Balancer Bolt Kit
1989 to 2007 5.9L Cummins 12/24V.
To ensure the damper is locked into place, use these ultra-strong ARP 200,000 p..
$45.30
First generation (1989-1993 Dodge 5.9L VE Cummins) mechanical fuel lift pump.
This pump supplies 3-5PSI of fuel pressure to the VE injection pump.&..
$51.84
-250x250.webp "89-18 Dodge 5.9L & 6.7L Cummins CNH Front Crank Seal")
CNH front crank main seal for the 1989-2018 Dodge Ram 5.9L & 6.7L Cummins diesel trucks.
DOES NOT include seal driver installation ring.
Th..
$20.05
Want a good quality front seal & repair sleeve, but don't want to pay Cummins prices?
Or, do you not trust the aftermarket seals available?
Th..
$122.85
Includes seal & wear sleeve. Does NOT include sleeve driver installation ring.
89-21 Dodge 5.9L Rear Main Seal Kit with Speedy/Wear Sleeve..
$117.33
Not running a mechanical lift pump anymore?
This plate will bolt right in place of your stock lift pump, blocking off the port.
Includes #2 in ..
$21.18
Complete Rocker assembly by CNH (Case New Holland). Item is nearly identical to the OE Cummins counterpart. Fits 5.9L & 6.7L Cummins diesels,..
$115.50
Single (1) valve cover bolt for the 89-98 5.9L 12 Valve Cummins diesel.
6 are required (of the standard bolt) or 4 standard bolts and two bolts wit..
$5.80
Want a good quality valve cover gasket, but don't want to pay Cummins prices?
This CNH (Case New Holland) gasket is your solution. It is as good, i..
$8.98
12 Valve Cummins Valve Cover Bolt Grommet.
Sold individually.
This item ONLY fits valve covers with the recessed hole on the valve cover. It wil..
$2.75
89-02 Dodge 5.9L CNH Gear Housing Gasket
This gasket installs between the timing gear case housing and the block. (this is the really hard to get to ..
$25.46
Custom Individual Runner Intake Manifold for the 98.5-02 Cummins 24V
Features:
Equal Air Distribution
3 Inch V-Band Inlet. V-band clamp is ..
$849.00
Arc-Flow Intake Manifold, Black Powdercoat, 98.5-02 Cummins, Pre-tapped for gauges/water injection, Includes Powder Coating and Machining. The ATS Int..
$317.13
Blade Runner (Charged Manifold) Dodge Trucks- 98.5-02 L6-5.9L (td) Features Increase airflow by 32.9% over stock ..
$498.75
S&B Intake Elbow's are designed to minimize airflow restriction to your engine, improve turbo spool, and lower EGT's. A great addition to your 98-..
$249.00
Pusher Intake Manifold for Cummins 5.9L turbo diesel engines in 1998.5-2002 Dodge Ram pickup trucks.
All Pusher intake manifolds can be used ..
$174.99
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.
High flow, smooth mandrel bent, 100 percent stainless stee..
$184.00
At Banks Power, just enough is never enough when it comes to engine airflow. Maximum power, performance and efficiency are the ultimate goals, but to ..
$499.00
This is the most cost effective way to protect your rear cylinders on trucks under the 500HP mark. It addresses the restrictive factory intake manifol..
$449.99
Full 3.5" MEGA post intercooler intake system for Cummins 5.9 liter turbo diesel engines in 1998.5-2002 Dodge Ram pickup trucks.The 3.5" MEGA Intake S..
$479.99
The Pusher 3" Cross-Air works with the factory intake manifold or any factory replacement manifold and is the most cost effective way to protect your ..
$299.99
Features a larger plenum for increased airflow, and smooth radius turns to reduce turbulence and intake pressure losses. BD’s unique design positions ..
$410.00
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.
Polished 304 Stainless Steel intake horn for all (94-07) D..
$234.00
'98.5-'02 5.9L "Air-Boss VP" Intake Plenum Cover & Grid Heater Delete Kit
EGT's running too high? Can't use all of the fuel you have ..
$319.99
Another Crazy Carl original product!
The Tunnel Ram is a patented intake for the Dodge Cummins diesel engine. It's unique design increases the airf..
$364.00
Contact to Confirm Availability!
Diamond Eye I3218 - 1998.5, 1999, 2000, 2001 & 2002 DODGE 5.9L CUMMINS 2500/3500 (ALL CAB & BED LENGTHS) ..
$947.62