94-98 Dodge 5.9L 12 Valve P7100 Injection Pump Parts & Throttle Linkage

Backordered til Mid September   **Updated on 08/01/2024** 94-98 P7100 Injection Pump Fuel Shutoff Solenoid Lever This is ONLY the lever that bolts on the pump.  Bosch part number: 2422002082..

Cummins P7100 Woodruff Key for the throttle lever arm. This is a TINY woodruff key, it goes on the shaft that the shutoff lever pivots on. This item DOES NOT include a P7100 injection pump or a red arrow (a shame, we know).  This is only to purchase the tiny key you dropped when you were ..

Includes item number 24 in second picture. This item has *Right Hand Thread & is 1.25" Long- We are not responsible for return shipping or expediting a new part if you don't check your thread style (right or left) or rod end length. Please verify what you have before purchasing. We have f..

ONLY number 23 from second picture. This item has *Left Hand Thread & is 1.25" Long- We are not responsible for return shipping or expediting a new part if you don't check your thread style (right or left) or  rod end length. Please verify what you have before purchasing. We have fou..

Increase power and torque in your 1994-1998 5.9L Cummins 12 valve by simply replacing the stock fuel plate with one of our custom ground Fuel Cam Plates in your P7100 Injection pump.   #12 #11 #10 #8 #6 #5 Cam Plate # →..

This is the part that gets destroyed if your starter sticks on. If your solenoid burned up you should replace the starter contacts or install a Larry'B's Solenoid-Saver Diode before you replace the solenoid. If the plunger stays up with the key on but won't pull up when you crank the ..

This brass bellcrank bushing replaces the flimsy OEM plastic bushings on P-pump engines. Use this bushing set to eliminate shaft wobble from worn bushings, prevent damage to the throttle position (TPS) sensor, and more improvements. Includes 2 pieces, to perform the upgrade on one truck.Power Driven..

Simplify removing and reinstalling delivery valves with this socket. This tools makes working on delivery valves easy, ensures secure installation, and keeps the valves from being damaged. Power Driven Diesel now offers an in-house designed Delivery Valve Holder Socket for P7100 injection pumps..

94-98 Dodge 5.9L 12 Valve Cummins Diesel Accelerator Linkage Assembly (OEM) Replaces Mopar- 5011849AB Cummins- 3932317..

AIR DOG AND FASS PUMP USERS INCREASE YOUR HORSE POWER AND FUEL PRESSURE WITH YOUR P7100 CUMMINSFor stock fuel systems, please check out OFV010 or OFV020 (OFV020 is biodiesel compatible).* OFV040HP Use with lightly modified Cummins diesels. * Fuel pressure range of 30 to 37 PSI..

Cummins Adjustable Overflow Valve for the Bosch P7100 Injection Pump By Tork Tek ALL THE PROBLEMS WITH THE BOSCH OVERFLOW VALVE HAVE BEEN SOLVED! * ADJUST YOUR FUEL PRESSURE WITHOUT STRETCHING SPRINGS * BULLETPROOF DESIGN ELIMINATES HAMMERED SEATS * CURE FOR HARD STARTING AND LOW POWER * OFV01..

Cummins Adjustable Overflow Valve for the Bosch P7100 Injection Pump By Tork Tek ALL THE PROBLEMS WITH THE BOSCH OVERFLOW VALVE HAVE BEEN SOLVED! * ADJUST YOUR FUEL PRESSURE WITHOUT STRETCHING SPRINGS * BULLETPROOF DESIGN ELIMINATES HAMMERED SEATS * CURE FOR HARD STARTING AND LOW POWER * USE T..

This plug will increase your rack travel for more fueling on your P7100 pump. AFC modifications are required to get the most out of this plug. The stock rack plug allows for 19mm of fuel rack travel. This "Mack" rack plug allows for 21mm of fuel rack travel.  Using this plug..

Genuine Bosch overflow valve for P7100 Pump This overflow valve regulates the primary pressure inside the injection pump. If this pressure is not within standards it can effect your timing, injector function and a number of other factors. This can cause your engine to run poorly in many ways. Lo..

Includes ONLY item #21 in second picture. Cummins: 3933130..

Backordered with No ETA   **Updated on 08/21/2024** Includes ONLY item #2 in second image - Second image does not reflect actual part. Actual part has one gray, plastic connector like first image. Cummins: 3925377..

Front seal/o-ring for the P7100 injection pump found on 94-98 Dodge 5.9L 12 Valve Cummins trucks.Some people may call this a mounting gasket as well.  Cummins: 3969698 Item number 5 in the picture...

94-98 P7100 Injection Pump Timing Pin Bosch part number: 1423124108..

Cummins: 3920922 Item number 8 in the picture...

Front seal/o-ring for the P7100 injection pump found on 94-98 Dodge 5.9L 12 Valve Cummins trucks.May also fit Cummins HD ISC, QSC, & 8.3L applicationsSome people may call this a mounting gasket as well.  Interstate Mcbee: M-3969698Replaces-Cummins: 3969698..

Is your truck extremely low on power, and now drive like a strong 7.3L Powerstroke? If so, there's a possibility the diaphragm in your AFC (air fuel control) housing is torn. It doesn't happen very often, but it is possible. To verify, you can remove the AFC from your truck and apply 15-25PSI of sho..

For use with Dodge Cummins VE, P7100, VP44 and CP3 Injection Pumps. The XDP XD134 is a finely machined tool that will remove the pump gear from the VE, P7100, VP-44 and CP3 injection pump. The increased depth on the step, prevents damage on the front cover. Competitive tools currently on the m..

Bosch: 2413318001Superseded: 2915038031          Item number 6 in the picture...

Cummins: 3920921 Item number 6 in the picture...

Superseded Bosch #: 2916699091 Item number 8 in the picture...

These should be replaced when you replace/upgrade your delivery valves. Bosch Part number: 2410210033..

Includes item number 24 in second picture.This item has *Right Hand Thread & is 1 3/4" Long- We are not responsible for return shipping or expediting a new part if you don't check your thread style (right or left) or overall rod end length. Please verify what you have before purchasing.PROD..

New replacement dust boot for the fuel shut-off solenoid above. This is the exact replacement part made by the OEM. It keeps the solenoid plunger and spring clean to prevent binding. It also holds the plunger in the solenoid. About a 5 min job to remove and replace.I know this is a lot of money for ..

Billet P7100 Pump Lock Pin. WAY cheaper than the junk plastic piece from Bosch! Contagious Diesel Performance part Number: CON9498PTLP..

This is the AFC plug cap on the P7100 injection pump. AFC's are also known as Aneroid Fuel Controls.  Did you open your hood to find your star wheel plug is missing? Did you drop it and it fell into never-never land?  These things happen to the best of us, we've got you covered!  ..

This replacement plate mounts on the side of automotive P7100 injection pumps. It houses the plastic timing pin that allows you to lock the timing on your injection pump at a pre-determined set point. This calibration is generally done by a qualified pump shop, however, if your pump timing is alread..

This washer seals the AFC plug cap on the P7100 injection pump. Comes in quantity of (1).This goes on the plug you remove to adjust the star wheel to adjust low-boost fueling.  Bosch part number: 2 420 101 135...

Genuine Bosch, includes set screw and nut for adjustment, but does not include mounting hardware.  Includes CIRCLED item only, it does not include the injection pump or cap for the governor housing which happens to kind of be in the circle.  If your pump has a shut off solenoid and y..

P7100 AFC Housing Gasket Fits- 1994-1998 Dodge 5.9L 12 Valve Cummins Part number: 2420206007..

This plug screws on to conceal the timing pin on a P7100 injection pump. This isn't a part you should really ever need to replace... unless you drop it and it ends up in never never land.. Seal/washer not included, please select above if you lost that too. DO NOT over tighten this cap.. or ..

These should be replaced when you replace/upgrade your delivery valves. This is for an individual O-Ring, if you'd like a full set click here Bosch Part number: 2410210033..

Some P7100 injection pumps from mid-size trucks have larger bolt holes than what is used for the throttle linkage on a pickup. These bushings reduce the thread size down to the proper size so you can mount Dodge-style throttle linkage on the pump. Includes 3 bushings.  The bolt require..

1994-1995 Dodge Ram 5.9L Cummins  Cummins OEM Throttle Spring Bracket This is a Direct-Fit Replacement on your 1994-1995 models.  Manufactured to Cummins Standards   Please confirm that your vehicle has this existing bracket for proper application.    Cu..

Bosch .50mm P7100 Delivery Valve shim for 94-98 Dodge Ram 5.9L 12 Valve Cummins.Bosch: 2410100004..

Bosch P7100 Delivery Valve Filler Piece for 94-98 Dodge Ram 5.9L 12 Valve CumminsBosch: 2413121048..

Upgrade your timing gear with our upgraded billet adjustable timing gear with the following benefits.*Infinite adjustability*Dramatically increased strength*Less possible slippage*No core required*Key includedPower Driven Diesel’s new timing gear design introduces several improvements over other gea..

CUMMINS 14MM FUEL PRESSURE GAUGE SNUBBER   * SNUBBER ELIMINATES GAUGE NEEDLE BOUNCE* USE ON ANY FUEL SYSTEM WITH A 14MM X 1.5 THREAD* FASTER INSTALLATION THAN A NEEDLE VALVE  Now, it's easier than ever to install a fuel pressure gauge on your Cummins diesel! If you want to install a fue..

Adjustable Timing Pump Gear for 1994-1998 Dodge 5.9L Cummins With P7100 Fuel Injection Pumps. Will also work on P pump conversions. Up to 40 degrees of timing adjustment in increments of 2 degrees. Hash marks allow for easier adjusting. Includes pump shaft key and all necessary hardware. ..

P-pump gear for stock 94-98 or 24v Cummins conversion with a P7100 injection pump. Also will replace a stock gear cracked by a killler dowel pin. Fits Dodge 12 and 24 valve Cummins engines up to 2002. Gear is aftermarket. DAP part number: 3931382D..

The SP500 Diesel Gauge Set will update existing 2017DSP Diesel Service Sets to handle 1994 to 1998 Cummins "B" engines used in Dodge Ram 250/350 pick-up trucks and some Fords. Updated 2017DSP Set will also service J.I Case tractors and off road equipment. Snap On Part: SP500 Snap-On ..

Bosch 13mm Barrel & Plunger for the Bosch P7100 Pump found on 5.9L 12 Valve Cummins DieselsThese are a flat-top plunger, they do not have a timing notch. SIX REQUIRED, SOLD INDIVIDUALLYMust be installed by a qualified pump shop/P7100 technician. This is not a do-it yourself job. Do not atte..

This plate is made to be installed in place of the AFC housing on a P7100 injection pump with an automotive governor.Formerly listed under part number P7100CAPSULEPLATEBosch 1420582002. ..

Part 3925377 on Backorder no ETA  **Updated on 08/22/2024** If you are looking for an entire kit, CLICK HERE. Please, select the pieces you need above (prices subject to change without notice). To verify fitment on your exact application, please enter your engine serial number in the f..