



89-18 Dodge 5.9L Cummins Fuel Lift Pump Block Off Plate
- Part Number: 020415-1
- Est. Ship Time: Usually Ships By Next Business Day
$22.95
More from this brand
Cummins 12 valve and 24 valve lift pump block off plate. Covers the hole on 89-98 12 Valves that would normally have a lift pump bolted into it. Allows you to eliminate the lift pump bracket on 98.5-02 24 Valve Cummins trucks.
03-18 trucks, this blocks off the ccv breather drainback port.
O-ring groove is machined into the backside. Comes with bolts and o-ring to seal it to the block. No need for leaking gaskets.
Keating Machine part number: 020415-1

89-98 Dodge 5.9L 12 Valve Cummins Lift Pump Gasket
Cummins part number 3939258 lift pump to engine block gaskets. Includes #3 in the second picture o..
$6.40
Adjustable Fuel Pump
The most versatile High Performance Fuel Pump (pump only) on the market. The FA's allow the customer to tweak the fuel pressu..
$649.00
Adjustable Fuel Pump
The most versatile High Performance Fuel Pump (pump only) on the market. The FA's allow the customer to tweak the fuel pressu..
$549.00
Adjustable Fuel Pump
The most versatile High-Performance Fuel Pump (pump only) on the market. The FA's allow the customer to tweak the fuel pressu..
$507.30
Adjustable Fuel Pump
The most versatile High Performance Fuel Pump (pump only) on the market. The FA's allow the customer to tweak the fuel pressu..
$507.30
Fits Cummins 6BT, 1989 to 2002 Dodge trucks and many other industrial applications with similar pump mounting. Has mounting for fuel filter built in s..
$45.00
Fits 1994-1998 5.9L Cummins fuel lift pump and preheater replacement 1/2 inch elbow hoseID of this hose is .497
Includes ONLY item number 5 in seco..
$32.45
S400 air outlet v-band flange tapered to 16ga tube. Comes with matching USA made matching clamp. These flanges measure 4.21″ total outside diameter. F..
Starting From $54.90
T6 Turbo Flange Gasket, Divided.
Fits most HT3B turbos as well...
$12.00
The only manifold available to give a substantial gain in power and fuel economy. Not cheap cast and not weak tubular. This is the finest fully CNC ma..
$700.00
3.5 ” V-band clamp. Fits most Keating Machine 3.5″ V-band flanges, S400, HT60 & some HX60 turbos when using our matching flanges. 4.21 inch OD, .400 i..
$26.00
CNC'd T-6 Mild Steel Flange. Best flowing T-6 to round pipe flange you will find! Works with 4" & 3.5" pipe Stainless Diesel uses them ..
$147.06
1 Set of 6, 15/16 size nuts, used to hold the 5.9L 12 Valve Cummins Diesel Injectors into the cylinder head.
These generally do not go bad and are re..
$145.35
AutoMeter Phantom Transmission Temperature Gauge
Autometer: 5757..
$86.09
4140 Alloy Steel Camshaft Retainer, Shim, and 7/16 Flat Head Bolt.Used on engines with helical cut camshaft gears. The retainer will keep the camshaft..
$43.70
Backordered with No ETA **Updated on 09/18/2023**Solve that pesky rear freeze plug problem once & for all!
Includes plate that bolts..
$45.95
Cummins 12MM Head Stud Bottoming Tap We recommend you bottom-tap your engine block head-stud threads when installing 12mm ARP or A1 head studs to ensu..
$26.46
12-60lb Intake & Exhaust Valve Springs 89-98 12 Valve Dodge 5.9L Cummins
The seat pressure on these springs is ~150bs at the installed height of 1.95..
$275.76
Please choose which part(s) you need from image.Number 2 - Seal, either side of tube. (Please choose single or both sides) - 3936876Number 3 - Filler..
$0.01
OFV060HP on Backorder with No ETA **Updated on 09/06/2023**AIR DOG AND FASS PUMP USERS
INCREASE YOUR HORSE POWER AND FUEL PRESSURE
WITH..
$27.95
NOW YOU CAN COMPRESS BOTH VALVE SPRINGS ON YOUR CUMMINS 12 VALVE, AT THE SAME TIME!The first ever valve spring compressor designed for the Cummins 12 ..
$46.95
89-98 Dodge 5.9L 12 Valve Cummins Lift Pump Gasket
Cummins part number 3939258 lift pump to engine block gaskets. Includes #3 in the second picture o..
$6.40
Proven for over a decade on many top level competition pulling trucks and drag trucks who needed to mount p-pumps or Sigma pumps on 2003 and up 5.9L a..
$1,095.00
Used on competition pulling trucks who need to mount p-pumps or Sigma pumps on 2003 and up 5.9L and 6.7L Cummins common rail engine blocks to utilize ..
$1,534.95
Used on competition pulling trucks who need to mount p-pumps or Sigma pumps on 2003 and up 5.9L and 6.7L Cummins common rail engine blocks to utilize ..
$1,624.95
Used on competition pulling trucks who need to mount p-pumps or Sigma pumps on 2003 and up 5.9L and 6.7L Cummins common rail engine blocks to utilize ..
$1,624.95
Fits 1989 to 2002 Cummins 5.9L engine blocks. Kit includes 3 billet side freeze plugs, 1 rear freeze plug featuring 1/2″ npt port supplied with brass ..
Starting From $193.35
Fits 1989 to 2002 12 & 24 Valve 5.9L Cummins engine block. Billet rear freeze plug features 1/2″ npt threaded center hole with plug (can be remove..
$52.50
One piece billet valve cover fits 4BT Cummins 8 valve. Designed for aftermarket injection lines run either over top or around front and back of cover...
$449.95
One piece billet valve cover fits 4BT Cummins 8 valve. Notched to fit over stock injection lines. We also have non-notched valve covers for engines wi..
$449.95
Fits Cummins 4BT 4 Cylinder engine, includes o-ring to seal against block and stainless hardware. This cover doesn’t have a breather port so it is use..
$199.95
Water pump cover block off fits B-series 4 and 6 cylinder fits Cummins engines. Uses stock water pump o-ring for sealing.Keating: 032513-2..
$45.00
Fits 1989 to 2002 5.9L Cummins engine block. Billet side freeze plug features recess for bolt head, includes o-ring freeze plug seal and copper sealin..
$34.95
Black anodized lift pump block off fits Cummins 12 valve and 24 valve. O-ring groove machined into back side. No need for leaking gaskets. Comes..
$24.95
Fits 12 Valve Cummins engine with stock gear housing. Requires factory gasket (not included), can use factory fan with stock 12 valve dampener and bel..
Starting From $419.95
One piece billet valve cover fits 1989 to 1993 1st gen 5.9L Cummins 12 valve engines. Notched to fit over stock injection lines. 3.25″ total height wi..
$649.95
One piece billet valve cover fits 1989 to 1993 1st gen 5.9L Cummins 12 valve engines. Notched to fit over stock injection lines.3.25″ total height wil..
$679.95
Limited Availability!Dodge 94-98 Second Gen P-Pump: Adjustable Fuel Plate Kit for all P-Pump applications. Depending on pump and modifications 25-140 ..
$190.55
Timing tool kit for a Dodge Cummins with the inline P7100 fuel pump, otherwise known as "p-pump". These pumps came stock on 1994 to 1998 Dodge trucks...
$159.99
Fits 1994-1998 5.9L Cummins mechanical fuel lift pump 90 degree elbow fitting. This is a direct replacement for the stock elbow. One end is threa..
$40.73
These should be replaced when you replace/upgrade your delivery valves. This is for an individual O-Ring, if you'd like a full set click here
Bosch P..
$5.12
This kit includes everything for bolt on installation of your Fass Lift Pump.Part number: NDB-1001..
$76.00
Description
Horseshoe shaped sealing washers for 12V Injectors.
-Sold IndividuallyPart#: DPE602..
$3.43
Thin copper washer for 12 Valve Cummins Injectors
If you are running our 715, 753, 864, injector for your 12 Valve
Dodge? You can tighten the nozzl..
$1.60
This is the part that gets destroyed if your starter sticks on. If your solenoid burned up you should replace the starter contacts or install a L..
$111.99
025 Delivery ValvesPower Driven Diesel 025 Delivery Valves for Cummins are for those who want a little more power than the 055’s can produce..
$195.00
What is
a Delivery Valve?
When it
comes to the fuel side of things, there are 3 aspects of the P-Pumped trucks
that determine how much power can..
$195.00
These governor springs will allow higher rpm and more power in your p-pump truck. For a 3K kit remove the center spring or leave it in for a 4K k..
$155.00
Cummins fuel pre-heater upper gasket for '94-'98, 12V 5.9L Dodge Cummins Turbo Diesel trucks.Part Number: 3834185S..
$8.40
Bosch .50mm P7100 Delivery Valve shim for 94-98 Dodge Ram 5.9L 12 Valve Cummins.Bosch: 2410100004..
$6.61
Bosch P7100 Delivery Valve Filler Piece for 94-98 Dodge Ram 5.9L 12 Valve CumminsBosch: 2413121048..
$7.29
Fits:1994-1998 Dodge Ram Cummins 5.9LAllow full rack travel in the P7100 Injection Pump on your 1994-1998 Dodge 5.9L Cummins with the XDP Cummins..
$29.95