-80x80.webp)
Dodge 5.9L Cummins Crazy Carl's 1/2" P7100 Fuel Inlet Banjo Fitting
$25.00
- Part Number: CC-banjo-p7100
- Est. Ship Time: Usually Ships In 1-2 Business Days
SSL SECURE
TRANSACTION
AUTHENTIC
PRODUCTS
GUARANTEED PREMIUM
QUALITY
A+ Rating
More from this brand
Starting From $215.00
Starting From $184.00
Starting From $184.00
Starting From $184.00
Another Crazy Carls original product!This barbed push-lock fitting allows the use of 1/2" fuel supply line to the P7100. It is a great way to get the ..
$25.00
Kit Includes:
3963983 (2) - #6 in image (sealing washers)
3939570 - #3 in image (called a bleed bolt)
3911446 ..
$143.21
CUMMINS 14MM FUEL PRESSURE GAUGE SNUBBER
* SNUBBER ELIMINATES GAUGE NEEDLE BOUNCE
* USE ON ANY FUEL SYSTEM WITH A 14MM X 1.5 THREAD
..
$26.69
These 14mm sealing washers work great on all 14mm fittngs including aftermarket aluminum fittings. These have an an inner lip that self centers on the..
$10.00
Replacement plastic timing pin with sealing o-ring.
Choose option above if you would like the retainer ring included. (part number 3904849)
Cumm..
$25.12
89-98 Dodge 12 Valve Timing Pin Housing
Cummins: 3919683..
$19.54
Cam sensor relocation bracket for the 01-02 Dodge 5.9L Cummins Diesel, for people doing a VP44 to P7100 conversion.
Adapter comes with all hardware..
$65.00
P-pump oil inlet fitting with oil restriction. If you choose to supply oil to your P7100 injection pump from the drivers side, this fitting is a must...
$19.99
This is the oil feed line you will need if you have a VP44 truck and are installing a P7100 Injection pump.
This line re-locates the oil feed into ..
$183.98
Includes:
2 X 120mm or 4 23/32 inch Bolts (part number: 39602)
2 X 200mm or 7 7/8 inch Bolts (part number: 39608)..
$33.58
Backordered
Backordered with no ETA (Updated 9/12/25)
Another Crazy Carl's original product!
The Tunnel Ram 24-P is our patented intake for..
$0.00
3 Gauge Set of your choice of Autometer 3rd Gen Dodge Factory Match, 4th Gen Dodge Factory Match, Z Series, *Sport Comp, Sport Comp II, Ultra Lite, *C..
$432.89
Complete upper cylinder head gasket set for the Dodge 89-98 5.9L 12 Valve Cummins engine.
This gasket set includes the standard PRESS ON valv..
$127.36
This is a complete lower end gasket set for the Dodge 89-98 5.9L 12 Valve Cummins engine. OEM gaskets are also available, however recently t..
$165.57
98.5-02 24 Valve Cummins Interstate McBee Head Gasket (STD.)
..
$50.04
Easily access your engine's oil filter by installing Pacbrake's oil filtration relocation kit.
A remote oil filter is most beneficial for those who..
$324.05
Kit Includes
Lines, Clamped Together
Gaskets & Bolts
Mild Steel available in:
.078
.084
.093
Stainless Steel ..
$762.31
This item normally ships out in 2-3 business days EVEN if you choose expedited shipping.
Both Black and Blue boots now available!
This i..
$215.00
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.
High flow, smooth mandrel bent, 100% stain..
$184.00
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.
High flow, smooth mandrel bent, 100 percent stainless stee..
$184.00
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.
High flow, smooth mandrel bent, tubular steel or 304 stain..
$184.00
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.
Polished 304 Stainless Steel intake horn for all (94-07) D..
$234.00
Dual intake horn promotes max flow to the head at both ends.
For use only with our dual intake plate(Not Included)
Comes with dipstick mount and..
$339.00
Another Crazy Carl original product!
The Tunnel Ram is a patented intake for the Dodge Cummins diesel engine. It's unique design increases the airf..
$364.00
This item normally ships out in 1-2 business days EVEN if you choose expedited shipping.
For those who want the custom look, a dual plate allows tw..
$185.00
Grid Heater Delete Block can be used to remove/replace the stock grid heater during warmer weather (above 30* unless plugged in) as it is not needed t..
$69.00
This is Crazy Carl's 1st gen 89-93 replacement throttle linkage kit. It come with 2 new heim joints, stainless shaft and stainless mounting hardware.
..
$45.00
-250x250w.webp "98.5-02 Cummins Crazy Carls P-Pump Conversion Kit")
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.
One of the most complete kits available at t..
$1,610.00
This item normally ships out in 1-2 business days EVEN if you choose expedited shipping.
Brackets, mount and linkage needed to use 24-Valve A..
$189.00
Another Crazy Carl's original product!Say goodbye to those old rusty shabby stock bolts!!Beautiful 304 Stainless Steel hardware kit for..
$29.00
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.
Another Crazy Carls original product!
..
$364.00
Note- Please read full description before purchasing!
This item normally ships out in 7-14 business days EVEN if you choose expedited shipping.
..
$1,910.00
Cummins 12 valve and 24 valve lift pump block off plate. Covers the hole on 89-98 12 Valves that would normally have a lift pump bolted into it...
$22.95
Secure your new upgraded fuel injectors with the Power Driven Diesel OEM Replacement 12v Cummins Injector Hold-Down Nut set. Designed for First and Se..
$30.00
Kit Includes:
3963983 (2) - #6 in image (sealing washers)
3939570 - #3 in image (called a bleed bolt)
3911446 ..
$143.21
OEM Cummins sealing washer. This installs on the upper banjo bolt on the rearmost fuel filter housing port.
1 of number 4, please see diagram.
..
$8.89
Have you upgraded from your factory mechanical lift pump to an electric pump? This block off will eliminate the void left by your stock pump. Complete..
$34.99
12v Return Tee with 2 Push Locks. Push Locks are 5/16"
Return Tee, Cummins 5/16 pushlock w/ tapped hole for injector galley return when elimin..
$17.00
This is for both washers and the check valve.
Number 4 & 5 only.
Cummins part number: 3918188, 3924726..
$181.89
Set of 6 Cummins part number 4942278
Includes 6 of item number 2 in second picture...
$46.74
Housing Kit Inludes:
3963983 (2)
Number 6 from second image only.
12mm..
$9.46
Return line to preheater and supply line from lift pump to canister.
Number 6 & 7 in image only.
Cummins part number: (#6) P#391..
$203.91
Picture 1 is actual part. Pictures 2 and 3 for reference only.3926481 ADAPTER,FILTER HEAD Screw on style 20mm stud...
$22.77
P7100 Return Line fits 1994-1998 12 Valve Cummins.
Number 4 from image ONLY!
Cummins part number: 3923171..
$110.30
P-7100 Injection Pump Oil Supply Line (12V). Braided S.S. 8" OAL 45/90 Deg. Ends.
This cannot be used for P7100 conversion swaps. This l..
$178.04
94-98 5.9L 12 Valve Cummins Vacuum Pump to Block Oil Feed Line
Item #6 in 2nd Picture
Part# 3923084..
$142.69
94-98 5.9L 12 Valve Cummins Vacuum Pump to Oil Line Fitting
Item #1 in the Picture Only
Part# 68138..
$26.27