-80x80.jpg)
89-02 Dodge Ram 5.9L Cummins 12V + 24V Keating Black Anodized Billet Fuel Lift Pump Block Off
$24.95
- Part Number: 020415-1-Black
- Est. Ship Time: Usually Ships By Next Business Day
SSL SECURE
TRANSACTION
AUTHENTIC
PRODUCTS
GUARANTEED PREMIUM
QUALITY
A+ Rating
More from this brand
Starting From $1,125.00
Starting From $1,594.95
Starting From $1,684.95
VPMAX Big Line Dual Feed Kit for 94-98 12V Dodge Cummins trucks.
Allows fuel to enter from two points to keep that hungry P Pump fed!
Hose and f..
$84.00
The only manifold available to give a substantial gain in power and fuel economy.
Not cheap cast and not weak tubular. This is the finest ful..
$695.00
Installing a new exhaust manifold, or simply removing a stock or aftermarket manifold to change gaskets? If so, you'll find that it is a real hassle t..
$26.99
The Fluidampr Performance Diesel Series Damper 960311 will smooth out the harsh engine harmonics while extending the life of the engine in your 1989-1..
$630.70
Fits 1989 to 2002 5.9L Cummins engine block. Billet side freeze plug features recess for bolt head, includes o-ring freeze plug seal and copper sealin..
$34.95
-250x250.png "1989-2002 Dodge 5.9L Cummins Keating Billet Rear Freeze Plug")
Fits 1989 to 2002 12 & 24 Valve 5.9L Cummins engine block. Billet rear freeze plug features 1/2″ npt threaded center hole with plug (can be ..
$52.50
Thermostat orings only.
Cummins part numbers:
Inner Seal: 3925466
Outer Seal: 3927305 ..
$21.08
Sick of snapping off the cheap plastic OE oil squirters?
Try these heavy duty BILLET oil squirters from Contagious diesel.
Guaranteed to a..
$50.00
89-2018 Dodge 5.9L & 6.7L McBee Cummins Cylinder Head Alignment Dowel.
These help locate the cylinder head on the block, these insert into the ..
$2.15
BD Power 1040281 Injector Connector Tubes for your 98.5-02 Dodge 5.9L Cummins are stock replacement tubes that are often replaced when installing new ..
$244.95
The CIP040 Cummins injector puller, by Tork Tool, is the newest tool for the Cummins 5.9. It was designed specifically for the 1998.5 to 2002 Cummins ..
$42.99
Cummins OEM fuel heater seal for the 89-93 Dodge 5.9L Cummins Part Number: 3913695..
$11.54
Return line to preheater and supply line from lift pump to canister.
Number 6 & 7 in image only.
Cummins part number: (#6) P#391..
$186.72
P-7100 Injection Pump Oil Supply Line (12V). Braided S.S. 8" OAL 45/90 Deg. Ends.
This cannot be used for P7100 conversion swaps. This line is for p..
$173.44
94-98 5.9L 12 Valve Cummins Vacuum Pump to Block Oil Feed Line
Item #6 in 2nd Picture
Part# 3923084..
$131.14
Proven for over a decade on many top level competition pulling trucks and drag trucks who needed to mount p-pumps or Sigma pumps on 2003 and up 5.9L a..
$1,125.00
Used on competition pulling trucks who need to mount p-pumps or Sigma pumps on 2003 and up 5.9L and 6.7L Cummins common rail engine blocks to utilize ..
$1,594.95
Used on competition pulling trucks who need to mount p-pumps or Sigma pumps on 2003 and up 5.9L and 6.7L Cummins common rail engine blocks to utilize ..
$1,684.95
Used on competition pulling trucks who need to mount p-pumps or Sigma pumps on 2003 and up 5.9L and 6.7L Cummins common rail engine blocks to utilize ..
$1,684.95
One piece billet valve cover fits 4BT Cummins 8 valve. Designed for aftermarket injection lines run either over top or around front and back of cover...
$479.95
One piece billet valve cover fits 4BT Cummins 8 valve. Notched to fit over stock injection lines. We also have non-notched valve covers for engines wi..
$479.95
Fits Cummins 4BT 4 Cylinder engine, includes o-ring to seal against block and stainless hardware. This cover doesn’t have a breather port so it is use..
$280.00
Cummins 12 valve and 24 valve lift pump block off plate. Covers the hole on 89-98 12 Valves that would normally have a lift pump bolted into it...
$22.95
Fits 12 Valve Cummins engine with stock gear housing. Requires factory gasket (not included), can use factory fan with stock 12 valve dampener and bel..
Starting From $449.95
One piece billet valve cover fits 1989 to 1993 1st gen 5.9L Cummins 12 valve engines. Notched to fit over stock injection lines. 3.25″ total height wi..
$679.95
One piece billet valve cover fits 1989 to 1993 1st gen 5.9L Cummins 12 valve engines. Notched to fit over stock injection lines.3.25″ total height wil..
$709.95
Fits 12 Valve Cummins engine with stock gear housing. Requires factory gasket (not included), can use factory fan with stock 12 valve dampener and bel..
Starting From $495.00
6 o-rings and 6 copper washers to reseal Keating Machine 12 valve billet valve covers.
Keating: (6) M8 copper washers & (6) -158 o-rings
..
$20.00
Set of 12 titanium retainers with hardened steel locks. Fits 12 Valve Cummins engines with single valve springs that are stock OD for example 60 pound..
$330.00
Fits 12 Valve Cummins engine with stock gear housing. Requires factory gasket (not included), can use factory fan with stock 12 valve dampener and bel..
Starting From $449.95
Cummins 12 valve and 24 valve lift pump block off plate. Covers the hole on 89-98 12 Valves that would normally have a lift pump bolted into it...
$22.95
Secure your new upgraded fuel injectors with the Power Driven Diesel OEM Replacement 12v Cummins Injector Hold-Down Nut set. Designed for First and Se..
$30.00
Kit Includes:
3963983 (2) - #6 in image (sealing washers)
3939570 - #3 in image (called a bleed bolt)
3911446 ..
$41.06
OEM Cummins sealing washer. This installs on the upper banjo bolt on the rearmost fuel filter housing port.
1 of number 4, please see diagram.
..
$8.16
Have you upgraded from your factory mechanical lift pump to an electric pump? This block off will eliminate the void left by your stock pump. Complete..
$34.99
12v Return Tee with 2 Push Locks. Push Locks are 5/16"
Return Tee, Cummins 5/16 pushlock w/ tapped hole for injector galley return when elimin..
$17.00
This is for both washers and the check valve.
Number 4 & 5 only.
Cummins part number: 3918188, 3924726..
$164.89
Set of 6 Cummins part number 4942278
Includes 6 of item number 2 in second picture...
$35.37
Housing Kit Inludes:
3963983 (2)
Number 6 from second image only.
12mm..
$9.01
Return line to preheater and supply line from lift pump to canister.
Number 6 & 7 in image only.
Cummins part number: (#6) P#391..
$186.72
LarryB's Feed Line/Fuel Heater/Filter Eliminator Kit For Dodge Cummins 12 Valve
Larry B's Return Line hose replacement kit for Bosch P7100 Pump on ..
$69.00
Picture 1 is actual part. Pictures 2 and 3 for reference only.3926481 ADAPTER,FILTER HEAD Screw on style 20mm stud...
$20.81
P7100 Return Line fits 1994-1998 12 Valve Cummins.
Number 4 from image ONLY!
Cummins part number: 3923171..
$101.38
P-7100 Injection Pump Oil Supply Line (12V). Braided S.S. 8" OAL 45/90 Deg. Ends.
This cannot be used for P7100 conversion swaps. This line is for p..
$173.44
94-98 5.9L 12 Valve Cummins Vacuum Pump to Block Oil Feed Line
Item #6 in 2nd Picture
Part# 3923084..
$131.14