-80x80.jpg)
AFC Spring Kit 94-98 Dodge 5.9L 12 Valve Cummins Diesel
- Part Number: AFCSPG
$35.00
More from this brand
Starting From $115.00
Starting From $225.00
Starting From $105.00
-60x60w.jpg "88-02 Dodge 5.9L Cummins CrankCase Breather Relocation Kit")
Starting From $245.00
AFC Spring Kit 94-98 Dodge 5.9L 12 Valve Cummins Diesel
75hp Stage 2 Injectors (DDP2) for the 1994-1998 Dodge 5.9L 12 Valve Cummins Turbo Diesel.By Dynomite Diesel Performance
There is no disputing the per..
$865.20
90hp Stage 3 Injectors (DDP3) for the 1994-1998 Dodge 12 Valve Cummins Turbo Diesel By Dynomite Diesel Performance
There is no disputing the performa..
$968.20
140hp Stage 4 Injectors (DDP4) for the 1994-1998 Dodge 5.9L 12 Valve Cummins By Dynomite Diesel Performance
Without Exception "The best" 12 Valve in..
$1,071.20
Limited Availability!! Call to Confirm!High Flow 191 Delivery Valves For 1994-1998 P7100 Pumps Found on Dodge 12V Cummins Turbo Diesels.
Do you need..
$245.00
Pure Diesel Power carries the complete line of cam plates for the P7100 injection pump by TST Products.Each kit comes complete with a new fuel curve c..
$195.00
Backordered
Backordered with No ETA **Updated on 03/21/2023**.020 Over Marine Head Gasket 1989-1998 Dodge 12 Valve 5.9L Cummins Diesel.Overall thickn..
$349.95
The AFC Spring Kit allows you to achieve a good compromise of minimal smoke under acceleration with responsiveness. Kit Includes- Medium and light AFC..
$35.00
Standard Head Gasket 1989-1998 Dodge 12 Valve 5.9L Cummins Diesel
Thickness (Pre-crushed thickness).086 inches or 2.18mmOEM Cummins: 3283335..
$323.11
Interstate-McBee Part number:12x Retainers: M-390029924x Keepers: M-3900250These are STOCK equivalent. They are not recommended for running over 3200R..
$31.89
12 Valve Cummins Interstate McBee Valve Spring RetainerThis is a STOCK equivalent. It is not recommended for running over 3200RPM Interstate-McBee: M-..
$2.40
12-60lb Intake & Exhaust Valve Springs 89-98 12 Valve Dodge 5.9L Cummins
The seat pressure on these springs is ~150bs at the installed height of 1.95..
$169.98
DiscontinuedThis kit is designed for those that converted their 99-04 Trucks to use the 05+ headlights with 9008 bulbs.
This harness is Plug and ..
$0.00
Delivery Valve SocketFor Installing or Removing the delivery valves on a P7100 Injection Pump..
$39.00
High Flow Laser Cut Delivery Valves by SCHEID Diesel For the P7100 Injection Pump found on 94-98 Dodge 12 Valve Cummins Turbo Diesel.Do you need more ..
$245.41
370 Bosch Marine Injectors with install kitBosch Diamond B 370 Marine injectors for the 1994-1998 Dodge Ram equipped with the 5.9L 12 valve Cummins tu..
$474.56
Solid Steel LTD 3rd Gen Style Adjustable Trackbar 94-02 4x4
REQUIRES PURCHASE OF THE 2nd GEN to 3rd GEN TRACK-BAR RETROFIT KIT FOR USE ON 94-02 TRUCK..
$346.50
The popular "DSS" steering stabilizer will greatly reduce steering "wander" on your late model Dodge pickup. This unit will serve to eliminate sector ..
$209.00
This trackbar retrofit kit will allow
you to utilize a 2003 and up factory Dodge trackbar on your '94 to '02 Dodge
RAM pickup. The '03 bar uses a ru..
$203.50
Pure Diesel Power carries the complete line of cam plates for the P7100 injection pump by TST Products.Each kit comes complete with a new fuel curve c..
$195.00
Hot
This 3200 rpm spring fits all VE Injection pumps on Dodges from 1989 to 1993. The spring will allow the injection pump to fuel all the way to 3200 rpm..
$25.00
89-93 Dodge 12 Valve Cummins "Old Smoky Power Pin"
The Dynomite Diesel Power Pin (fuel pin) gives your 89-93 Dodge Ram 25-40 more horsepower. That's ..
$99.95
4000 RPM Governor Spring Kit (4K GSK)The Peak Diesel Governor Spring Kit is a special combination of springs and Piers' unique design on seats.This ki..
$115.00
2 Inner Springs to Convert 3k gsk to a 4k gsk.94-98 Dodge 12 Valve Cummins
Only designed to work with Peak Diesel Performance 3K governor spring kits..
$19.99
4000 RPM Governor Spring Kit (4K GSK)The Peak Diesel Governor Spring Kit is a special combination of springs and Piers' unique design on seats.This ki..
$115.00
4000 RPM Governor Spring Kit with 12 Heavy Duty Valve 60lb Springs
The Peak Diesel Governor Spring Kit is a special combination of Bosch springs and..
$225.00
3000 RPM Governor Spring Kit (3K GSK)
This kit allows your engine to have full fueling to approximately 3000RPM, which greatly improves the driving e..
$105.00
-250x250w.jpg "88-02 Dodge 5.9L Cummins CrankCase Breather Relocation Kit")
Tired of spots on your driveway, oil on your radiator, an oily mess in your engine compartment? Give the Cummins Breather Kit a try!
Works on all Cu..
$245.00
Are they purdy? Nope, but they'll hold 60 pounds of boost and they are made in the good old U.S.A. Not knock-offs like most other companies.
94-02 Do..
$80.00
OUR KIT CONTAINS:RTV SENSOR SAFE ULTRA GRAY GASKET MAKER
KDP TAB
FRONT SEAL
LOCKTITE
The Killer Dowel Pin is responsible for more hear..
$69.00
94-02 Dodge Hi-Performance Upper Intercooler BootFits 94-02 Dodge
Replaces OEM intercooler boot
4-Ply brick red Aramid Fiber with Black Matt..
$28.95
Ideal for transitioning from 4" turbo inlet to 3" cold pipe in twin turbo set up4-Ply brick red Aramid Fiber with Black Matte finish cover
3 inc..
$35.00
DISCONTINUEDApplication: 03-07 Dodge Ram Cummins 5.9L DieselPerformance Intercooler Boot & Clamp KitSuperior material, stays on, holds more ..
$0.00
DISCONTINUEDApplication: 03-07 Dodge Ram Cummins 5.9L Diesel07.5-2009 6.7L Cummins
Performance Turbo to Intercooler tube connector boot & 2..
$0.00
DISCONTINUEDPeak Intercooler Boot & Clamp Kit
Application: 94- 02 D..
$0.00
Dodge 94-98 Second Gen P-Pump: Adjustable Fuel Plate Kit for all P-Pump applications. Depending on pump and modifications 25-140 RWHP increase.Kit com..
$190.55
Fits 1994-1998 5.9L Cummins mechanical fuel lift pump 90 degree elbow fitting.May fit other applications.Includes ONLY item number 7 in second pi..
$39.75
These should be replaced when you replace/upgrade your delivery valves. This is for an individual O-Ring, if you'd like a full set click here
Bosch P..
$3.12
This kit includes everything for bolt on installation of your Fass Lift Pump.Part number: NDB-1001..
$76.00
DescriptionHorseshoe shaped sealing washers for 12V Injectors.
-Sold IndividuallyPart#: DPE602..
$3.43
Thin copper washer for 12 Valve Cummins Injectors
If you are running our 715, 753, 864, injector for your 12 Valve
Dodge? You can tighten the nozzl..
$1.60
This is the part that gets destroyed if your starter sticks on. If your solenoid burned up you should replace the starter contacts or install a L..
$111.99
025 Delivery ValvesPower Driven Diesel 025 Delivery Valves for Cummins are for those who want a little more power than the 055’s can produce..
$195.00
What is
a Delivery Valve?When it
comes to the fuel side of things, there are 3 aspects of the P-Pumped trucks
that determine how much power can..
$195.00
These governor springs will allow higher rpm and more power in your p-pump truck. For a 3K kit remove the center spring or leave it in for a 4K k..
$155.00
Cummins fuel pre-heater upper gasket for '94-'98, 12V 5.9L Dodge Cummins Turbo Diesel trucks.Part Number: 3834185S..
$8.40
Bosch .50mm P7100 Delivery Valve shim for 94-98 Dodge Ram 5.9L 12 Valve Cummins.Bosch: 2410100004..
$4.03
Bosch P7100 Delivery Valve Filler Piece for 94-98 Dodge Ram 5.9L 12 Valve CumminsBosch: 2413121048..
$6.50
Fits:1994-1998 Dodge Ram Cummins 5.9LAllow full rack travel in the P7100 Injection Pump on your 1994-1998 Dodge 5.9L Cummins with the XDP Cummins..
$29.95
P7100 .120 Billet Oversized Delivery Valve Holders for 94-98 5.9L 12 Valve CumminsThese are sold separately, you will need 6 total.Part number: 232602..
$70.82