
Dodge 5.9L Cummins Crazy Carl's 1/2" P7100 Fuel Inlet Banjo Fitting
$25.00
- Part Number: CC-banjo-p7100
- Est. Ship Time: Usually Ships In 1-2 Business Days

SSL SECURE
TRANSACTION

AUTHENTIC
PRODUCTS

GUARANTEED PREMIUM
QUALITY

A+ Rating
More from this brand
Starting From $220.00
Another Crazy Carls original product! This barbed push-lock fitting allows the use of 1/2" fuel supply line to the P7100. It is a great way to get the 1/2" fuel lines on when using our APPS kit. Includes high flow banjo bolt, 2 soft copper sealing washers and the 1/2" barbed banjo fitting. Mounts to the P7100 fuel inlet. |
Part number: CC-1/2" banjo p7100

Another Crazy Carls original product!This barbed push-lock fitting allows the use of 1/2" fuel supply line to the P7100. It is a great way to get the ..
$25.00
Kit Includes:
3963983 (2) - #6 in image (sealing washers)
3939570 - #3 in image (called a bleed bolt)
3911446 ..
$41.06
CUMMINS 14MM FUEL PRESSURE GAUGE SNUBBER
* SNUBBER ELIMINATES GAUGE NEEDLE BOUNCE
* USE ON ANY FUEL SYSTEM WITH A 14MM X 1.5 THREAD
..
$26.69
These 14mm sealing washers work great on all 14mm fittngs including aftermarket aluminum fittings. These have an an inner lip that self centers on the..
$13.03
Replacement plastic timing pin with sealing o-ring.
Choose option above if you would like the retainer ring included. (part number 3904849)
Cumm..
$23.09
89-98 Dodge 12 Valve Timing Pin Housing
Cummins: 3919683..
$17.86
Cam sensor relocation bracket for the 01-02 Dodge 5.9L Cummins Diesel, for people doing a VP44 to P7100 conversion.Adapter comes with all hardware to ..
$65.00
P-pump oil inlet fitting with oil restriction. If you choose to supply oil to your P7100 injection pump from the drivers side, this fitting is a must...
$19.99
This is the oil feed line you will need if you have a VP44 truck and are installing a P7100 Injection pump.
This line re-locates the oil feed into th..
$183.98
Includes:
2 X 120mm or 4 23/32 inch Bolts (part number: 39602)
2 X 200mm or 7 7/8 inch Bolts (part number: 39608)..
$22.08
Another Crazy Carl's original product!
The Tunnel Ram 24-P is our patented intake for the 98-02 Dodge Cummins 24V diesel engine WI..
$364.00
3 Gauge Set of your choice of Autometer 3rd Gen Dodge Factory Match, 4th Gen Dodge Factory Match, Z Series, *Sport Comp, Sport Comp II, Ultra Lite, *C..
$432.89
Complete upper cylinder head gasket set for the Dodge 89-98 5.9L 12 Valve Cummins engine.
This gasket set includes the standard PRESS ON valv..
$127.36
This is a complete lower end gasket set for the Dodge 89-98 5.9L 12 Valve Cummins engine. OEM gaskets are also available, however recently t..
$165.57
98.5-02 24 Valve Cummins Interstate McBee Head Gasket (STD.)
..
$50.04
Easily access your engine's oil filter by installing Pacbrake's oil filtration relocation kit.
A remote oil filter is most beneficial for those who..
$324.05
Kit Includes
Lines, Clamped Together
Gaskets & Bolts
Mild Steel available in:
.078
.084
.093
Stainless Steel ..
$721.69
This item normally ships out in 2-3 business days EVEN if you choose expedited shipping.
Both Black and Blue boots now available!
This i..
$220.00
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.
High flow, smooth mandrel bent, 100% stain..
$206.80
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.
High flow, smooth mandrel bent, 100 percent stainless stee..
$184.00
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.
High flow, smooth mandrel bent, tubular steel or 304 stain..
$184.00
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.
Polished 304 Stainless Steel intake horn for all (94-07) D..
$234.00
Dual intake horn promotes max flow to the head at both ends.
For use only with our dual intake plate(Not Included)
Comes with dipstick mount and..
$339.00
Another Crazy Carl original product!
The Tunnel Ram is a patented intake for the Dodge Cummins diesel engine. It's unique design increases the airf..
$364.00
Backordered with No ETA (Updated on 6/3/2025)
Another Crazy Carls original product!
The Tunnel Ram CR is a new patented in..
$364.00
This item normally ships out in 1-2 business days EVEN if you choose expedited shipping.
For those who want the custom look, a dual plate allows tw..
$185.00
Grid Heater Delete Block can be used to remove/replace the stock grid heater during warmer weather (above 30* unless plugged in) as it is not needed t..
$69.00
This is Crazy Carl's 1st gen 89-93 replacement throttle linkage kit. It come with 2 new heim joints, stainless shaft and stainless mounting hardware.F..
$35.00
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.
One of the most complete kits available at t..
$1,710.00
This item normally ships out in 1-2 business days EVEN if you choose expedited shipping.
Brackets, mount and linkage needed to use 24-Valve A..
$184.00
Another Crazy Carl's original product!Say goodbye to those old rusty shabby stock bolts!!Beautiful 304 Stainless Steel hardware kit for..
$29.00
This item normally ships out in 3-5 business days EVEN if you choose expedited shipping.
Another Crazy Carls original product!
..
$364.00
Elevate your Dodge Cummins Diesel truck's performance with AVP's Billet Delivery Valve Holders designed for the P7100 fuel pump. Engineered for precis..
$259.99
62001010007 Backordered until the Beginning of July (Updated 5/7/25)
Timing tool kit for a Dodge Cummins with the inline P7100 fuel pump, otherwise..
$199.00
Backordered with No ETA (Updated 6/9/25)
94-98 P7100 Injection Pump Fuel Shutoff Solenoid Lever
This is ONLY the lever that bolts on the pump.&n..
$100.74
Cummins P7100 Woodruff Key for the throttle lever arm.
This is a TINY woodruff key, it goes on the shaft that the shutoff lever pivots on.
This it..
$3.99
Cummins 12 valve and 24 valve lift pump block off plate. Covers the hole on 89-98 12 Valves that would normally have a lift pump bolted into it...
$22.95
The rubber components of the AFC (the diaphragm, foot shaft o-ring, and housing seal) were previously hard to find and often become neglected on aging..
$95.00
Adjust your 12v Cummins injectors with this injector shim kit. Perfect your injector install with this shim kit.
PDD: 61214191100..
$25.00
Secure your new upgraded fuel injectors with the Power Driven Diesel OEM Replacement 12v Cummins Injector Hold-Down Nut set. Designed for First and Se..
$30.00
Includes item number 24 in second picture.
This item has *Right Hand Thread & is 1.25" Long-
We are not responsible for return sh..
$23.73
ONLY number 23 from second picture.
This item has *Left Hand Thread & is 1.25" Long- We are not responsible for return shipping or expeditin..
$70.87
The XDP OER Series New Fuel Injector XD499 from XDP is a direct replacement for the failed injector on your 1994-1995 Dodge 5.9L Diesel. OER series fu..
$99.95
The XDP OER Series New Fuel Injector XD498 from XDP replaces the failed fuel injector on your Dodge 5.9L Diesel. XDP OER Series Fuel Injectors are bui..
$99.95
Elevate your Dodge Cummins Diesel truck's performance with AVP's Billet Delivery Valve Holders designed for the P7100 fuel pump. Engineered for precis..
$44.99
Kit Includes:
3963983 (2) - #6 in image (sealing washers)
3939570 - #3 in image (called a bleed bolt)
3911446 ..
$41.06
This is the part that gets destroyed if your starter sticks on. If your solenoid burned up you should replace the starter contacts or install a L..
$111.99