-80x80.jpg)
4000 RPM GSK w/ 12 HD valve springs, 94-98 Dodge 12V Cummins
- Part Number: 4kgskw12spgs
- Est. Ship Time: Usually Ships By Next Business Day
$225.00
More from this brand
Starting From $115.00
Starting From $105.00
Starting From $59.00
-60x60w.jpg "88-02 Dodge 5.9L Cummins CrankCase Breather Relocation Kit")
Starting From $245.00
3000 RPM Governor Spring Kit (3K GSK)
This kit allows your engine to have full fueling to approximately 3000RPM, which greatly improves the driving e..
$105.00
4000 RPM Governor Spring Kit (4K GSK)The Peak Diesel Governor Spring Kit is a special combination of springs and Piers' unique design on seats.This ki..
$115.00
4000 RPM Governor Spring Kit with 12 Heavy Duty Valve 60lb Springs
The Peak Diesel Governor Spring Kit is a special combination of Bosch springs and..
$225.00
High Tech Turbo Sled Puller 66 550-625 HP 1225 ft. lbs. torqueFits 1989-2007 Dodge Cummins Turbo Diesels.A boost fooler in included for 03-07 trucks.3..
$1,890.00
5000 RPM Governor Spring Kit (5K GSK)This 5,000 RPM kit utilizes the stock idle (large) spring and will idle at stock levels. We have installed this k..
$241.81
Backordered
Backordered with No ETA **Updated on 09/01/2023**These extra heavy duty 14mm XHD studs are made from L19 and have a glass bead finish, 22..
$801.35
5000 RPM Governor Spring Kit (5K GSK)This 5,000 RPM kit does not utilize the stock idle (large) spring. We only recommend using these springs when you..
$223.12
This diode is now resin potted to protect against breakage.
For 12valve engines, years 94 to 98-1/2
Fuel solenoid failure almost always begins w..
$32.95
-250x250.jpg "89-02 Dodge 5.9L 12 Valve/24 Valve Cummins Oil Cooler")
Cummins: 3957544
Picture for representation ONLY...
$316.05
High RPM Governor Spring Kit- 3000 RPM -
1994-98 Dodge 5.9L 12-Valve Cummins.
Please allow for a 7-10 build time before shipping.Recommended fo..
$0.00
Governor Spring Kit- 4000 RPM - 1994-98 Dodge 5.9L 12-Valve Cummins. Recommended for Towing, Street, and Competition ApplicationsPart# 705-974-21..
$0.00
Full set requires 6 pistons.
Mahle part number: 224-3513
High temperature thermal coating option available.
Please allow 1-2 weeks extra delivery..
$79.05
The Hamilton Cams 07-H-002 Large Valves are designed for the Cummins 12-Valve engine found in your 1989-1998 Dodge Pickup. This 1.870" Intake valve fe..
$449.00
Did you break off the stock "nipple" on your stock plastic timing pin? Time to fish that chunk of plastic out of the back of the cam gear and replace ..
$35.00
This is a aftermarket stock replacement oil cooler. Fits 1994-2002 5.9L Cummins.
Part number: 3921558A
Picture for representation ONLY (but is ..
$179.00
High Flow Laser Cut Delivery Valves by SCHEID Diesel For the P7100 Injection Pump found on 94-98 Dodge 12 Valve Cummins Turbo Diesel.Do you need more ..
$275.40
Backordered
Backordered with No ETA **Updated on 03/09/2023**
Dodge 94-2002 Cummins HX40, HTB Turbo 4" DownpipeFits the HTT HTB line of turbos, along..
$194.95
High Tech Turbo QUICK DIESEL 64For the 1989-2007 Dodge 5.9L Cummins DieselFits 1989-2007 Dodge Cummins Turbo Diesels. A boost fooler is included for 0..
$1,710.00
AutoMeter Ultra Lite Pyrometer 0-1600 DegreeAutometer: 4344..
$272.71
Pure Diesel Power carries the complete line of cam plates for the P7100 injection pump by TST Products.Each kit comes complete with a new fuel curve c..
$195.00
AutoMeter Ultra Lite 0-60 PSI Boost Gauge Includes 6 ft. nylon tubing with 1/8" NPT fittings. Includes 1/4'' NPT adapter/fittings. Autometer: 4305..
$101.23
140hp Stage 4 Injectors (DDP4) for the 1994-1998 Dodge 5.9L 12 Valve Cummins By Dynomite Diesel Performance
Without Exception "The best" 12 Valve in..
$1,071.20
MBRP 94-02 Dodge Cummins Aluminized 4" Turbo Downpipe
4", bolts directly to stock turbo.
MBRP: DAL401..
$159.99
Autometer C2 0-60PSI Boost GaugeIncludes 6 ft. nylon tubing with 1/8" NPT fittings. Includes 1/4'' NPT adapter/fittings. Autometer: 7105..
$110.91
C2 Transmission Temperature Gauge 100-250º Stepper Motor TechnologyIncludes 1/8" NPT Sender. Air-Core meter movement. Includes 3/8"" NPT adapter/fitti..
$105.99
Autometer C2 0-2000 Degree Pyrometer Stepper MotorFull Sweep, Stepper Motor meter movement.Air-Core meter movement.Includes Type K Thermocouple.Autome..
$282.61
Only Auto Meter has the top quality full coverage "A" pillar gauge mounts for your 1994-1997 Dodge full size truck. The 17201 mount holds three 2 1/16..
$117.59
90hp Stage 3 Injectors (DDP3) for the 1994-1998 Dodge 12 Valve Cummins Turbo Diesel By Dynomite Diesel Performance
There is no disputing the performa..
$968.20
Delivery Valve SocketFor Installing or Removing the delivery valves on a P7100 Injection PumpPLEASE NOTE- SPLINE FITMENT IS VERY TIGHT ON THIS ITEM. F..
$69.00
The AFC Spring Kit allows you to achieve a good compromise of minimal smoke under acceleration with responsiveness. Kit Includes- Medium and light AFC..
$59.00
4000 RPM Governor Spring Kit (4K GSK)The Peak Diesel Governor Spring Kit is a special combination of springs and Piers' unique design on seats.This ki..
$115.00
3000 RPM Governor Spring Kit (3K GSK)
This kit allows your engine to have full fueling to approximately 3000RPM, which greatly improves the driving e..
$105.00
The AFC Spring Kit allows you to achieve a good compromise of minimal smoke under acceleration with responsiveness. Kit Includes- Medium and light AFC..
$59.00
-250x250w.jpg "88-02 Dodge 5.9L Cummins CrankCase Breather Relocation Kit")
Tired of spots on your driveway, oil on your radiator, an oily mess in your engine compartment? Give the Cummins Breather Kit a try!
Works on all Cu..
$245.00
DISCONTINUED (7-31-23)Are they purdy? Nope, but they'll hold 60 pounds of boost and they are made in the good old U.S.A. Not knock-offs like most othe..
$0.00
OUR KIT CONTAINS:
RTV SENSOR SAFE ULTRA GRAY GASKET MAKER
KDP TAB
FRONT SEAL
LOCKTITE
The Killer Dowel Pin is responsible for more hear..
$69.00
DISCONTINUED
94-02 Dodge Hi-Performance Upper Intercooler Boot
Fits 94-02 Dodge
Replaces OEM intercooler boot
4-Ply brick red Aramid Fibe..
$0.00
2 Inner Springs to Convert 3k gsk to a 4k gsk.94-98 Dodge 12 Valve Cummins
Only designed to work with Peak Diesel Performance 3K governor spring kits..
$19.99
DiscontinuedIdeal for transitioning from 4" turbo inlet to 3" cold pipe in twin turbo set up
4-Ply brick red Aramid Fiber with Black Matte finish c..
$0.00
DISCONTINUEDApplication: 03-07 Dodge Ram Cummins 5.9L DieselPerformance Intercooler Boot & Clamp KitSuperior material, stays on, holds more ..
$0.00
DISCONTINUEDApplication: 03-07 Dodge Ram Cummins 5.9L Diesel07.5-2009 6.7L Cummins
Performance Turbo to Intercooler tube connector boot & 2..
$0.00
DISCONTINUEDPeak Intercooler Boot & Clamp Kit
Application: 94- 02 D..
$0.00
Limited Availability!Dodge 94-98 Second Gen P-Pump: Adjustable Fuel Plate Kit for all P-Pump applications. Depending on pump and modifications 25-140 ..
$190.55
Hot
PDP Pick
Timing tool kit for a Dodge Cummins with the inline P7100 fuel pump, otherwise known as "p-pump". These pumps came stock on 1994 to 1998 Dodge trucks...
$159.99
Fits 1994-1998 5.9L Cummins mechanical fuel lift pump 90 degree elbow fitting. This is a direct replacement for the stock elbow. One end is threa..
$40.73
These should be replaced when you replace/upgrade your delivery valves. This is for an individual O-Ring, if you'd like a full set click here
Bosch P..
$5.12
This kit includes everything for bolt on installation of your Fass Lift Pump.Part number: NDB-1001..
$76.00
Description
Horseshoe shaped sealing washers for 12V Injectors.
-Sold IndividuallyPart#: DPE602..
$3.43
Thin copper washer for 12 Valve Cummins Injectors
If you are running our 715, 753, 864, injector for your 12 Valve
Dodge? You can tighten the nozzl..
$1.60
This is the part that gets destroyed if your starter sticks on. If your solenoid burned up you should replace the starter contacts or install a L..
$111.99
025 Delivery ValvesPower Driven Diesel 025 Delivery Valves for Cummins are for those who want a little more power than the 055’s can produce..
$195.00
What is
a Delivery Valve?
When it
comes to the fuel side of things, there are 3 aspects of the P-Pumped trucks
that determine how much power can..
$195.00
These governor springs will allow higher rpm and more power in your p-pump truck. For a 3K kit remove the center spring or leave it in for a 4K k..
$155.00
Cummins fuel pre-heater upper gasket for '94-'98, 12V 5.9L Dodge Cummins Turbo Diesel trucks.Part Number: 3834185S..
$8.40
Bosch .50mm P7100 Delivery Valve shim for 94-98 Dodge Ram 5.9L 12 Valve Cummins.Bosch: 2410100004..
$6.61
Bosch P7100 Delivery Valve Filler Piece for 94-98 Dodge Ram 5.9L 12 Valve CumminsBosch: 2413121048..
$7.29
Fits:1994-1998 Dodge Ram Cummins 5.9LAllow full rack travel in the P7100 Injection Pump on your 1994-1998 Dodge 5.9L Cummins with the XDP Cummins..
$29.95