Shop By Category
Your Cart

2019-2023 Ram 6.7L Cummins 2500/3500 Fleetguard Fuel Filter Upgrade Kit

2019-2023 Ram 6.7L Cummins 2500/3500 Fleetguard Fuel Filter Upgrade Kit
2019-2023 Ram 6.7L Cummins 2500/3500 Fleetguard Fuel Filter Upgrade Kit
2019-2023 Ram 6.7L Cummins 2500/3500 Fleetguard Fuel Filter Upgrade Kit
2019-2023 Ram 6.7L Cummins 2500/3500 Fleetguard Fuel Filter Upgrade Kit
2019-2023 Ram 6.7L Cummins 2500/3500 Fleetguard Fuel Filter Upgrade Kit

Available Options

$209.99

  • Part Number: 19FLTCummins
  • Est. Ship Time: Ships in 1-2 Business Days
SSL SECURE TRANSACTION

SSL SECURE
TRANSACTION

AUTHENTIC PRODUCTS

AUTHENTIC
PRODUCTS

GUARANTEED PREMIUM QUALITY

GUARANTEED PREMIUM
QUALITY

BBB+ Rating

A+ Rating

  • visa
  • mastercard
  • paypal
  • american express
  • discover

-THIS ITEM CANNOT BE EXPEDITED- STANDARD SHIPPING ONLY

Dual Fleetguard fuel filter kit for 2019-2023 Ram 6.7L Cummins PICKUP only.

In 2019 Ram went from the '13-'18 spin-on water separator filter in the rear, to a cartridge style filter canister mounted above and forward of the rear axle and the secondary fuel filter still being up front on the left side of the engine block. They also went to the troublesome CP4 for some reason, which plagued Duramax from 2011-2016. These CP4's are very sensitive to bad fuel and definitely need better filtration and lubricity to stay protected. 
If you buy the recommended filters, you get much better filtration than the earlier trucks had to protect your fuel system, however now the issue is the combined cost of these two filters to replace. These recommended filters cost anywhere between $125-$175 to replace at a recommended 15,000 mile interval if you do it yourself. After making many phone calls around the country, dealers are getting upwards of $350 just to change the fuel filters on these trucks. Ridiculous!

We have not only come up with a solution for the high cost, we have also made it very simple for you guys that would normally take it into the dealership, to do yourselves in under 15 minutes easily saving a couple hundred dollars every 15,000 miles.

Why we put the Fleetguard filters in our kits.

We developed these kits years ago to give guys the BEST protection they could get for their trucks at an affordable price. We also wanted guys to be able to get filters in there local hometown, rather than buying them from us like other companies do. We had the CAT 1R-0750 filter in our kits for over 10 years, because they are a great filter and are readily available. Now the CAT filters are considered an older filter-media technology compared to the advancement in filtration over the last several years. We have also seen fake knockoffs out there in the marketplace that can cause issues and leave you less protected. Our goal will always be to provide you with the BEST filtration you can get, to protect your high-dollar investment. Introducing the NanoNet technology!

The newer NanoNet technology found in Fleetguard fuel filters is now the most up to date, advanced technology and superior protection you can buy. The result of this Nanonet technology gives it a 2 micron rating at over 99.6% efficiency! Do your own research on these Fleetguard Nanonet filters. For the low cost and the easy availability, you will be pressed to find a better filter out there to protect your truck..

With our kit we give you:

- Better than stock filtration for added protection.

- Very affordable filter changes that are completed in minutes without even opening the hood.

- Easy 45 minute installation with absolutely no drilling or cutting of anything.

- Completely reversible back to stock in minutes.

* Our kit and how it will save you money *

Because of the new fuel system design starting in 2013 we wanted to retain the stock rear water-separator having the heating element and WIF (water in fuel) sensor. With our kit we add the Fleetguard FF5814 NanoNet filter right beside it to give you the best filtration you can possibly have, all at the rear of the truck in an easy to get to location. Once our kit is installed, you will only need to change the forward filter under the hood every 2-3 years because of algae growth that will appear on it over time from todays increasingly bad fuel.

* With our kit, you will spend approximately $70-80 per filter change saving around 50%. This cost will change both rear filters at 15,000 mile intervals.*

Easy installation, but even easier removal.

This fuel filter kit was designed to be initially installed in 45 minutes, but to then be completely removed in only 10 minutes should you want to pull it for any warranty work you may need done to be completely untraceable at the dealer. Most dealerships have absolutely no problem with added fuel filtration. This kit utilizes the stock, push-button quick disconnect fuel fittings for an easy installation and removal.

'19-Present Cummins Filter Kit

Our '19-Present Cummins Filter Kit installs right beside the stock water filter location at the rear of the truck. It is a simple install of around 45 minutes.

This kit provides the highest level of protection available for your 6.7 Cummins engine with the NanoNet technology filter design.

* PLEASE NOTE: These '19-Present Cummins Filter Kits were designed and manufactured for the 2019-Present Ram Cummins 6.7 diesel 2500 & 3500 non cab-chassis trucks. This filter kit mounts towards the rear of the truck underneath beside the stock water-separator filter. If your fuel tank is between the frame rails at the very back end where a spare tire would normally mount, this is a cab-chassis style and this kit will not fit.


Returns are accepted within 30 days of purchase with a 25% restocking fee and our actual shipping charges taken out. All returns must be approved and in resellable condition which means mounting bracket not scratched, parts clean and the plastic still on the filters.

Installation instructions can be found here.

Diesel Fuel Filter Kits part number: 19FLTCummins.

 
Lame California Prop 65 Notice