Fleece PowerFlo Lift Pump | 2011-2024 Ram 4500/5500 6.7L C&C Midship Tank

The Fleece PowerFlo FPE-PF-CUMM-1124-CCMS is a direct OEM in-tank replacement lift pump for the 2011-2024 Ram 4500/5500 6.7L Cummins Cab and Chassis with the midship 22-gallon tank. It replaces OEM part number 68064422AB, retains the factory water-in-fuel sensor, factory fuel heaters, and factory fuel lines, and is rated to support up to 800 hp with a lifetime limited parts warranty.

Buy this if...

• Your truck is a 2011-2024 Ram 4500 or 5500 Cab and Chassis with the midship 22-gallon tank and the 6.7L Cummins
• You want to replace the factory lift pump with a dual-gerotor upgrade that supports up to 800 hp while retaining factory sensors, fuel heaters, and fuel lines
• You want a cleaner install than external lift pump options - no tank sumps, draw straws, or additional air filtration required

Do not choose this if...

• Your truck is a standard Ram 2500 or 3500 pickup - this pump is for the Cab and Chassis midship tank only
• Your tank is not the midship 22-gallon configuration - confirm tank size and location before ordering
• You are looking for a stock-output pump replacement with no added flow capacity - this pump is built for higher-demand applications up to 800 hp

Verify before ordering...

• Confirm your truck is a Ram 4500 or 5500 Cab and Chassis, not a standard pickup body
• Confirm your factory pump matches OEM part number 68064422AB or 04560227AC

Why This Pump Makes Sense for the C&C Application

The factory lift pump on the Ram 4500/5500 Cab and Chassis midship tank is a known limitation for higher-demand builds. The PowerFlo replaces it with a dual-gerotor design - two OEM-quality gerotor pumps working together for increased flow and reliability over the single factory pump - without requiring any of the typical workarounds that come with aftermarket external lift pump installs.

The active fill bucket built into the PowerFlo eliminates the quarter-tank fuel starvation issue common with other high-flow lift pump solutions. No sump modifications, no draw straws, no extra filtration added to the tank. It drops in, reuses your factory sensor and fuel heaters, and connects to the factory fuel lines. Fleece states install time is less than half that of other high-flow options.

For builds that need to run custom fuel lines or aftermarket filters, the pump outlet and return are threaded for a -8 O-ring fitting (3/4"-16 thread), so you are not locked into the factory plumbing path if your build calls for something different.

Key Specs

Fitment Coverage

2011-2024 Ram 4500/5500 6.7L 24V Cummins - Cab and Chassis only

Covers all model years from 2011 through 2024 in the Ram 4500 and 5500 Cab and Chassis configuration with the midship 22-gallon fuel tank. This pump does not fit the standard Ram 2500/3500 pickup tank configuration.

OEM Interchange: 68064422AB, 04560227AC

Avoid These Common Mistakes

• Not confirming tank size: The midship 22-gallon tank is specific to the C&C body. If your Ram 4500/5500 has a different tank configuration, verify the OEM part number matches 68064422AB before ordering.
• Expecting this to replace an external pump: This is an in-tank replacement. It installs inside the fuel tank and is not compatible with external lift pump mounting configurations.

Before You Order

• Truck confirmed as 2011-2024 Ram 4500 or 5500 Cab and Chassis with 6.7L Cummins
• Tank confirmed as the midship 22-gallon configuration
• Factory pump OEM number matches 68064422AB or 04560227AC
• Build demand confirmed within the 800 hp rating

The FPE-PF-CUMM-1124-CCMS is the correct Fleece PowerFlo lift pump for this application when your C&C midship tank and OEM part number match.

Frequently Asked Questions