Fleece Performance FPE-351-1317 Cheetah Turbocharger - 2013-2018 6.7L Cummins

The Fleece Performance FPE-351-1317 Cheetah is a stock-appearing drop-in turbocharger for 2013-2018 Ram 2500/3500 6.7L 24V Cummins trucks. This is a bolt-on upgrade, not a stock-style replacement - the exclusive 63mm FMW compressor wheel and Inconel turbine wheel deliver smooth throttle response and strong top-end power up to 700 RWHP, with a brand new actuator included and no actuator calibration programming required.

Buy this if...

• Your truck is a 2013-2018 Ram 2500 or 3500 with the 6.7L 24V Cummins and you want a stock-appearing upgraded turbo that bolts on without an expensive kit, fabrication, or actuator programming.
• You want improved throttle response, strong top-end power up to 700 RWHP, full exhaust brake and warm-up function preserved, and a 2 Year Limited Warranty.
• You understand the core charge requirement and have a rebuildable core ready to return.

Do not choose this if...

• Your goal is a pure stock-output replacement with no performance ceiling - this turbo is built to exceed stock capability, not replicate it.
• Your truck is outside the 2013-2018 6.7L 24V Cummins application range.
• You are not prepared to return a rebuildable core - a core charge applies to this turbocharger.

Verify before ordering...

• Confirm your application is a 2013-2018 Ram 2500/3500 6.7L 24V Cummins.
• Note that the speed sensor is not included - confirm whether your truck's original speed sensor is serviceable before starting installation.
• Review the core charge policy and plan for return shipping costs before placing the order.

Watch the 6.7L Cummins Cheetah in Action

Stock Housing, Upgraded Internals - Plus a Brand New Actuator

A stock replacement turbo restores factory output. The FPE-351-1317 is built to exceed it - and still installs exactly like the OEM unit. The exterior uses stock housings, all factory turbocharger functions are maintained including the exhaust brake and warm-up cycle, and no kit or modified piping is required.

The 63mm FMW compressor wheel and Inconel turbine wheel are Fleece Performance exclusive components - not factory parts. They are produced in-house using forged milled wheel technology that is stronger than billet, spools faster, and delivers a broader torque curve. The result is a turbo rated at 700 RWHP that spools and responds sharply in daily driving, towing, and harder builds.

Buy this for a complete bolt-in upgraded turbo that replaces the stock unit and the actuator in one purchase. Stay with a standard replacement if stock output is all you need.

• 63mm FMW compressor wheel - Fleece Performance exclusive, produced in-house
• Inconel turbine wheel
• Brand new actuator included - no calibration programming required
• Maintains all OEM factory functions including exhaust brake and warm-up
• Supports up to 700 RWHP
• 100% stock-appearing exterior
• 50-state compliant: CARB EO# D-834-2 / SEMA Cert SC-FLC01-0012
• 2 Year Limited Parts Warranty
• Core charge applies - return instructions included in shipment

What the 700 RWHP Rating Means For Your Build

The 700 RWHP figure is the turbo's airflow ceiling - the point at which the compressor runs out of capacity. For a daily driver or tow rig, that means substantial headroom above normal operating demands. For a build targeting maximum output, the rest of the truck's setup and modifications need to support that level. The turbo will not be the limiting factor for most 6.7L Cummins builds, but getting to 700 RWHP requires more than the turbo alone.

What Comes In The Kit - And What Does Not

The kit includes everything listed below. Note that the speed sensor is not included - verify your truck's original speed sensor condition before starting the job.

• Cheetah turbocharger with brand new actuator
• Exhaust flange gasket
• Exhaust flange studs and nuts
• Turbo oil drain gasket
• Coolant banjo sealing washers
• Core return paperwork and instructions

Interchange Part Numbers

Use these as a secondary fitment cross-check after confirming the 2013-2018 6.7L 24V Cummins application:

Installation Instructions

Official installation instructions from Fleece Performance: FPE-351-1317 Install Instructions

Before You Order

• Application confirmed: 2013-2018 Ram 2500/3500 6.7L 24V Cummins.
• Core charge acknowledged: rebuildable core required, return shipping at your cost.
• Speed sensor confirmed: not included - verify original sensor condition before starting.
• Build goal confirmed: upgraded performance headroom, not stock-output restoration.

Application and core plan confirmed? The FPE-351-1317 is the correct Cheetah for your 6.7L Cummins - a complete bolt-in upgraded turbo with a brand new actuator, no calibration required, and a 2 Year Limited Parts Warranty.

Frequently Asked Questions