Pure Diesel Power, your number 1 diesel performance parts source!

Pure Diesel Power Price Match

live chat service provider

PDP Phone Number

PDP Email Signup

Shop By Brands all1-9ABCDEFGHIJKLMNOPQRSTUVWXYZ

Free shipping on all orders over $150! Free Shipping on orders over $150! *Exclusions Apply

Injectors & Fuel System

First Gen Cummins Fuel System

Pure Diesel Power would like to welcome you to our Dodge 1st Gen 5.9L Cummins diesel fuel related page. We offer parts from Industrial Injection, Cummins, Dynomite Diesel, Air Dog, Fleetgaurd, Bosch, Fuelab and FASS. We offer new and rebuilt VE injection pumps, fuel pins, fuel filters, injectors and nozzles, fuel screws, fuel return lines and injection lines, governor springs, sump kits, and much more for your 1st Gen 5.9L Cummins!

89-93 5.9L 12V Dodge Cummins Injection Pump Gear Puller

Tork Teknology specializes in designing and manufacturing tools for the Cummis 5.9 and 6.7 diesel. (The Duramax is next) Our lastest tool is the CGP020 injection pump gear puller for the Bosch VE, P7100, VP-44 and CP3. Yes, it will work with all four pumps, and it's improved.

Before we produce a new tool, we spend a lot of time in testing. What we found (from Evan at Martins Repair in West Virginia) was the currently produced tool can bend the sheet metal front cover on CP3 equipped engines. There just isn't enough clearance between the tool and the cover. If you weren't very careful, you would have to remove the cover and hammer out the dents. If you didn't fix the cover, you had an oil leaker.

We solved that problem by machining a deeper step on the puller to provide MORE clearance. The step is an additional .075 deeper. That amount makes the difference between a quick pump replacement and a long weekend fixing sheet metal. That's the care we put into every product we manufacture.

The other improvements are not so obvious. We made the Cummins gear remover out of pre-hard material instead of cheap cold rolled steel. Sure that costs more. but you get a quality tool that will last a lifetime. Second, we have the tool double plated so it doesn't rust! Try that will a black oxide tool. If you don't keep a coating of oil on the tool, she is going to rust. Our plated tool doesn't rust.

Part # CGP020

 

+

From Cummins Cummins

89-91 Dodge 5.9L Non-Intercooled Cummins OEM Injection Line Set. Also referred to as fuel supply tubes. Does not include fuel line clamps. These lines...


From Cummins Cummins

Made for 89-91 5.9L Cummins engines that still utilize an injector with a 9MM tip Must order Quantity 6 Cummins part number: 3900808 Image for...

+

Minimum quantity for "89-91 Dodge 5.9L Cummins 9mm Injector Sealing Washer" is 6.


From Cummins Cummins

Injection Pump Fuel Return Line Number 2 in Image. This line, in theory, should fit 1989-1991 Dodge with the non-intercooled 5.9L Cummins diesel....


From Cummins Cummins

1989-1993 5.9L VE Cummins Injection Pump Gear Number 5 from image ONLY! Cummins part number: 4932713 Optional Bosch gear key available, part...


AirDog ® II-4G The next generation in the fuel delivery system. The AirDog 2-4G A6SABD340 Air/Fuel Separation System for your 1989-1993...

+

The new AirDog® II Demand Flow Fuel Preporator®

89-93 Dodge 5.9L Cummins Diesel 100GPH Airdog 2 System with preset fuel pressure regulator.

This new model Fuel Preporator® improves on the original by offering demand flow, so that the unit only draws as much fuel from the tank – through the tank module – as is required by the engine, and then returns only air and a dribble of fuel to the tank. What does this mean? Connecting to the tank module means there is no need to drill holes in the fuel tank to install an aftermarket fuel draw straw, so installation with the included fittings is QUICK and EASY.

The AirDog II also features a preset fuel pressure regulator. As always, all AirDog
® II units come complete with fittings, fuel lines, mounting brackets, and full-color installation manual specific to each model truck.



* Most Compact System Available

* Only 7" L x 3.2" W x 10" H

* High Efficiency, Long Life Gerotor Fuel Pump

* Lower Cost Replacement Filters

* Relay Controlled Wiring Harness

* Low Fuel Pressure Warning Light Available

* Includes Wire Screen Water Separator

* Lifetime Warranty

 

AirDog® II Installation Kit

All-Inclusive Installation Kit includes:

  •     Relay Control Wiring Harness
  •     Fuel Module Up-Grade (when required)
  •     All Fuel Fittings Required
  •     Mounting Hardware
  •     1/2″ Fuel Lines W/ OEM Style Quick Connect Fittings
  •     AirDog® II Bracket & Spacer
  •     Plastic Ties
  •     Installation Manual

 

Reliability and Performance! Two powerful reasons to add an AirDog® II to your diesel pickup!

The AirDog® II provides the proper pressure/flow of fuel to your diesel engine under virtually all operating conditions for PEAK EFFICIENCY with CONSISTENT and MAXIMUM POWER OUTPUT!

Replaces Pureflow technologies: A5SPBD338

Pureflow technologies: A6SPBD338

+

Flows 100GPH! Preset at 10PSI
Fits 1989-1993 Dodge 5.9L Cummis Diesel Equipped trucks.


PureFlow AirDog® manufactures and supplies AirDog® Fuel Air Separation Systems and high performance lift pumps for diesel pick-up trucks.

AirDog® works by using the Fuel Preporator®. The system can improve diesel engine performance by separating the entrained air from the fuel, also improving fuel economy through improved injection timing, increased power and better fuel burn. The effectiveness has been proved over millions of miles and verified by the EPA and CARB Certified Olsen Ecological Laboratory testing under ISO 8178 8 Mode Test criterion.

An engine equipped with the Fuel Preporator® has consistently shown a timely injection and will perform at peak power output and efficiency regardless of the fuel filter condition. Learn more about how AirDog® can improve your engine performance!
 

Only 7” L x 3.2” W x 10” H

AirDog® American made, quality driven products provide some of the following benefits:

  •     Remove air, water, particulates and vapor from fuel to maintain optimal fuel flow and fuel delivery.
  •     Improve fuel economy
  •     Reduce exhaust emissions
  •     Improve diesel engine performance
  •     Increase Horsepower
  •     Improve throttle response
  •     Increased top end power
  •     Longer injector life
  •     Smoother idle
  •     Optimal fuel system lubrication

All-Inclusive Installation Kit includes:

  •     Relay Control Wiring Harness
  •     1/2″ Suction Tube (when required)
  •     All Fuel Fittings Required
  •     Mounting Hardware
  •     1/2″ Fuel Lines W/ OEM Style Quick Connect Fittings
  •     AirDog® Bracket & Spacer
  •     Plastic Ties
  •     Installation Manual

 
Fuel Pump/Filter Mount Pictured Below, click to enlarge.

Fuel Pressure sender shown in picture is for illustrative purposes only & is not included.

PureFlow Technologies Part number:  A1SPBD336


 

+

Flows 150GPH! 
Fits 1989-1993 Dodge 5.9L Cummis Diesel Equipped trucks.


PureFlow AirDog® manufactures and supplies AirDog® Fuel Air Separation Systems and high performance lift pumps for diesel pick-up trucks.

AirDog® works by using the Fuel Preporator®. The system can improve diesel engine performance by separating the entrained air from the fuel, also improving fuel economy through improved injection timing, increased power and better fuel burn. The effectiveness has been proved over millions of miles and verified by the EPA and CARB Certified Olsen Ecological Laboratory testing under ISO 8178 8 Mode Test criterion.

An engine equipped with the Fuel Preporator® has consistently shown a timely injection and will perform at peak power output and efficiency regardless of the fuel filter condition. Learn more about how AirDog® can improve your engine performance!
 

Only 7” L x 3.2” W x 10” H

AirDog® American made, quality driven products provide some of the following benefits:

  •     Remove air, water, particulates and vapor from fuel to maintain optimal fuel flow and fuel delivery.
  •     Improve fuel economy
  •     Reduce exhaust emissions
  •     Improve diesel engine performance
  •     Increase Horsepower
  •     Improve throttle response
  •     Increased top end power
  •     Longer injector life
  •     Smoother idle
  •     Optimal fuel system lubrication


All-Inclusive Installation Kit includes:

  •     Relay Control Wiring Harness
  •     1/2″ Suction Tube (when required)
  •     All Fuel Fittings Required
  •     Mounting Hardware
  •     1/2″ Fuel Lines W/ OEM Style Quick Connect Fittings
  •     AirDog® Bracket & Spacer
  •     Plastic Ties
  •     Installation Manual


 
Fuel Pump/Filter Mount Pictured Below, click to enlarge.

Fuel Pressure sender shown in picture is for illustrative purposes only & is not included.

PureFlow Technologies Part number:  A4SPBD337

+

From Cummins Cummins

Includes only #4 in the picture.

Cummins: 3939355

+

From Cummins Cummins

First generation (1989-1993 Dodge 5.9L VE Cummins) mechanical fuel lift pump. Lift pump only. Don't forget to get gaskets! This pump supplies 3-5PSI of...

+

Performance Replacement Lift Pumps for Diesel Trucks and Equipment. High End Gerotor Fuel Pump Features The Raptor ® Lift Pumps allows more fuel...

+
Up