-80x80.webp)
89-98 Dodge 5.9L 12 Valve Cummins PDD Injector Shim Kit
$25.00
- Part Number: 61214191100
- Est. Ship Time: Usually Ships in 2-3 Business Days
SSL SECURE
TRANSACTION
AUTHENTIC
PRODUCTS
GUARANTEED PREMIUM
QUALITY
A+ Rating
Injector Removal ToolSave time and hassle removing your 12v injectors! It’s normal for injectors to become stuck to the head and require som..
$19.95
Current lead time 6 weeks out (Updated 3/26/25)Power Driven Diesel head bolts are a great economical option for mild to moderate builds. Power Dri..
$199.99
Set of 6 Fel-Pro Valve Cover Gaskets for the 89-98 Dodge 5.9L 12 Valve Cummins Diesels.Includes 6 valve cover bolt sealing washers as well.We ..
$35.00
Cummins Adjustable Overflow Valve for the Bosch P7100 Injection PumpBy Tork TekALL THE PROBLEMS WITH THE BOSCH OVERFLOW VALVE HAVE BEEN S..
$57.19
Billet P7100 Pump Lock Pin. WAY cheaper than the junk plastic piece from Bosch!Contagious Diesel Performance part Number: CON9498PTLP..
$30.00
Did you break off the stock "nipple" on your stock plastic timing pin?
Time to fish that chunk of plastic out of the back of the cam gear a..
$35.00
Injector Install Kit for 1989 - 1998 Dodge 5.9L 12V Cummins B, C Series.By Interstate McbeeIncludes:6: M-154087 Square Cut O-Ring
6: ..
$12.96
This is a more efficient solution to the TPS/APPS Sensors that are prone to failure.Symptoms of a faulty TPS sensor:Jumping In/Out of Overd..
$29.99
Now available in convenient kits, you can replace deteriorated or damaged factory boots with ease! This kit Early 3rd Gen Dodge Cummins 2003-2007 truc..
$220.00
Now available in convenient kits, you can replace deteriorated or damaged factory boots with ease! This 03-07 Ford intercooler boots kit fits 6.0L Pow..
$220.00
If you're looking for a great upgrade over your stock cylinder heads on your 6.0L Powerstroke this is a great replacement!Power Driven Diesel Sta..
$2,500.00
Backordered
Backordered with No ETA (Updated 10/31/25)If you're looking for a great upgrade over your stock cylinder heads on your 6.0L Powerstroke this is a ..
$3,100.00
If you're looking for a great upgrade over your stock cylinder heads on your 6.0L Powerstroke this is a great replacement!Power Driven Diesel Sto..
$1,010.00
If you’re looking to enhance the performance and reliability of your 6.0L or 6.4L Ford Powerstroke engine, Power Driven Diesel has the solution ..
$389.00
The Power Driven Diesel Factory HE351 Cast Compressor Wheel 60mm Pre Balance is a high-quality upgrade for your turbocharger. This compressor wheel ut..
$40.00
Shop the best performance diesel intercooler boots for your truck. These are the best boots for charge air piping and hold over 100lbs of boost. Now a..
$220.00
Heavy Duty SFI 29.1 rated flexplate for Dodge 68RFE automatic transmissions. An upgraded flexplate is recommended for all trucks making 500HP or more ..
$200.00
Power Driven Diesel 4BT Cummins 055 Delivery Valves are the perfect upgrade for those who tow! These will increase fuel flow to 35 cc. Boost power wit..
$140.00
The Power Driven Diesel 4BT Cummins 7 mm Delivery Valves are hot street or race delivery valves. They provide 90 cc over stock and will add power to y..
$170.00
If you're looking to add some power and more fuel to your 4BT then this injector set from Power Driven Diesel is a perfect fit!Power Driven Diesel..
$410.00
Power Driven Diesel PowerJet 4BT P-Pump Injectors are built, tested, and calibrated to exacting standards at our shop in Utah, ensuring high quality a..
$466.00
The new manufactured aftermarket Power Driven Diesel Stage 1 CNC-Ported 8v Cylinder Head for 4BT 3.9L has reinforced ribs throughout, strengthened wal..
$1,760.00
Power Driven Diesel offers this set of 8 high-performance drop-in valve springs for the 8v Cummins cylinder head. These lightweight valve spring assem..
$283.33
Cummins 12 valve and 24 valve lift pump block off plate. Covers the hole on 89-98 12 Valves that would normally have a lift pump bolted into it...
$22.95
Fits: 1989-1993 5.9L CumminsThis Alliant Fuel Transfer Pump is a replacement part for you old and worn out fuel pump in your 1989-1993 Dodge 5.9L ..
$91.15
The rubber components of the AFC (the diaphragm, foot shaft o-ring, and housing seal) were previously hard to find and often become neglected on aging..
$95.00
Secure your new upgraded fuel injectors with the Power Driven Diesel OEM Replacement 12v Cummins Injector Hold-Down Nut set. Designed for First and Se..
$30.00
PROBLEM: If you are running an aftermarket pump that is mounted external of the fuel tank, you will need to install a draw straw or drill your fu..
$359.00
Have you upgraded from your factory mechanical lift pump to an electric pump? This block off will eliminate the void left by your stock pump. Complete..
$34.99
CUMMINS GEAR REMOVER VE , P7100 OR VP44 INJECTION PUMPSRemoving the gear from a VE, P7100 or VP44 injection pump requires a spec..
$28.39
12v Return Tee with 2 Push Locks. Push Locks are 5/16"Return Tee, Cummins 5/16 pushlock w/ tapped hole for injector galley return when elimin..
$19.00
This is for both washers and the check valve.
Number 4 & 5 only.
Cummins part number: 3918188, 3924726..
$181.88
Black anodized lift pump block off fits Cummins 12 valve and 24 valve. O-ring groove machined into back side. No need for leaking gaskets. Comes..
$24.95
Mopar locking fuel cap.
Full stainless steel locking assembly.Comes with two keys
Meets Federal Fuel Safety StandardsMopar part number: 8240..
$43.09
12mm banjo bolt to 3/8" pushlock adapter fitting.Add on the optional high flow 12mm x 1.5 banjo bolt and seals for a complete kit. (PDPHF12MM) Pa..
$14.99
The Draw Straw™ 3 Is the threaded version of the original DS2 for use with plastic or metal tanks in Dodge, Ford and GM trucks. This unit is a s..
$57.00
Anodized billet aluminum Y-fitting with barbed ends for pushlock hose. Fleece Part Number: FPE-FIT-Y06-BLK
..
$23.99
Fuel SumpFeatures:• 1/2" NPT Outlet Port• 1/2" NPT Return Port With Stand Tube • Fully Functional Water ..
$129.99