-80x80.webp)
Hot
Aftermarket Parts 89-93 Dodge 5.9L 12 Valve Cummins Diesel Fuel Heater Delete Stud
$15.99
- Part Number: J925954
- Est. Ship Time: Usually Ships By Next Business Day
SSL SECURE
TRANSACTION
AUTHENTIC
PRODUCTS
GUARANTEED PREMIUM
QUALITY
A+ Rating
More from this brand
Starting From $2,245.00
Starting From $79.95
Starting From $55.00
Starting From $199.00
For those living in warm climates where cold starts are not an issue, the OE heater grid can be replaced with S&B’s Heater Block Delete, whi..
$99.00
Includes number 10 in picture only.
DOES NOT INCLUDE NUT
Part number: 3990112
..
$43.23
Cummins fuel heater delete nipple for 89-93 Dodge 5.9L Cummins. Cummins part number: 3925954..
$38.60
Fits 89-93 Dodge VE Pump Equipped 5.9L Cummins Diesel Trucks
Only includes item #10 pictured.
Cummins: 3914385..
$64.56
Includes #4 in the picture only! Cummins: 3938655..
$19.63
Includes only #4 in the picture.
Cummins: 3939355..
$9.65
89-18 5.9L & 6.7L 12V/24V Dodge Cummins Injection Pump Gear Puller
Tork Teknology specializes in designing and manufacturing tools for the..
$42.49
Hot
This 3200 rpm spring fits all VE Injection pumps on Dodges from 1989 to 1993. The spring will allow the injection pump to fuel all the way to 3200 rpm..
$17.89
If you have a modified 89-93 Dodge 5.9L Cummins truck, you already know that it is a pain to adjust the stock fuel screw.
This custom made extra-lo..
$15.95
12-60lb Intake & Exhaust Valve Springs 89-98 12 Valve Dodge 5.9L Cummins
The seat pressure on these springs is ~150bs at the installed height o..
$275.76
Includes seal and install instructions. Seal comes with plastic inner ring. Rear Main Seal Housing(or plate gasket) NOT included. -see below.
Cummins..
$47.95
Backordered
Backordered with No ETA (Updated on 10/3/25)
HMR 12mm Head stud kit for the 89-93 Dodge 5.9L 12 Valve Cummins Turbo Diesel
These st..
$486.62
This is a freeze/expansion plug kit for the 4/6B Cummins engine block. This kit also includes the cylinder head/block alignment dowels as pictured.
..
$18.24
Mahle 20 over bore pistons are on backorder with NO ETA. (Updated 3/12/2025)
5.9L Cummins Overhaul/Rebuild kit featuring Mahle Pistons & Rings ..
$1,169.00
For 240 Ohm Empty / 33 Ohm Full Gauge models. Adjustable for 5" - 24" deep tank. Fits standard 5-bolt mounting flange...
$53.83
Hot
Fleetguard LF3894 Stratapore oil filter for the 89-02 Dodge 5.9L Cummins Diesel.
Most filters look the same on the outside. It's what's inside tha..
$21.11
Replacement UPGRADED Fuel and Water Separator for 89-93 1st Generation Dodge 5.9L Cummins diesel trucks!
Much larger, almost twice as tall!
..
$17.98
FleetGuard AF4555M Replacement Air Filter for the 89-92 Dodge 2500/3500 equipped with the 5.9L Cummins Diesel.
The Fleetguard brand, defining quali..
$44.61
6.7L Cummins stock replacement reman HE300VG turbo for 2013-2018 Ram Cummins diesel trucks with automatic & manual transmissions.
Fits PIC..
$2,245.00
Replacement Fuel Injector Return Line KitFits 2014-2019 Ram & Jeep 3.0L EcoDiesel Engines.Did you break a return line tee on your return line whil..
$79.95
Standard Motor Products oil pressure sensor is a great alternative to the OEM cummins oil pressure sensor that is frequently on backorder.
Standard..
Starting From $55.00
Hot
PDP Pick
Timing tool kit for a Dodge Cummins with the inline P7100 fuel pump, otherwise known as "p-pump". These pumps came stock on 1994 to 1998 Dod..
$199.00
New
The BTR Fuel Injector Inner Harness is engineered as a direct replacement for 2001–2004 Chevy and GMC 6.6L LB7 Duramax engines. Each harness con..
$80.99
New
The BTR Fuel Injector Harness Upgrade Kit is the proven solution for the notorious injector harness issues found on 2004.5–2005 Chevy and GMC 6...
$112.50
Fiber-Based transmission pan gasket for 68RFE
Part Number: 72300F..
$14.99
Synapse Reman Allison Transmission Control Module (TCM) for the following applications
*These TCM’s are 100% plug and play. The TCM strategy ..
$1,199.99
Kit is used to properly service the entire engine fuel system, that contains everything that is to be replaced in cases of contamination. Comes with a..
$5,995.18
Contact us to confirm availability if you are in a hurry.
The race to produce a dependable oversize replacement piston for the L5P engine pla..
$1,299.00
Contact us to confirm availability if you are in a hurry.
The race to produce a dependable oversize replacement piston for the L5P engine pla..
$1,299.00
Fixed 1410 yoke for the front output of a 241DHD transfer case.
Includes seal.
Cast, not forged. Utilizes straps for the U-joint caps. ..
$134.20
40038536 AAM Slip Yoke 1415 1410 33/34 Spline Nickel Plated Dodge 273 / 271DHD transfer case.
Part number: 40038536 (replaces 5170317AA, 5127513AA an..
$145.95
V-band assemblies are the most versatile and reliable way to connect your exhaust components. With V-band assemblies, you achieve the flexibility to i..
$55.99
These 304 stainless steel V-band clamps are designed for clamping exhaust components together.Please Note: By popular request, these clamps have been ..
$20.00
Cummins 12 valve and 24 valve lift pump block off plate. Covers the hole on 89-98 12 Valves that would normally have a lift pump bolted into it...
$22.95
Fits: 1989-1993 5.9L Cummins
This Alliant Fuel Transfer Pump is a replacement part for you old and worn out fuel pump in your 1989-1993 Dodge 5.9L ..
$91.15
The rubber components of the AFC (the diaphragm, foot shaft o-ring, and housing seal) were previously hard to find and often become neglected on aging..
$95.00
Adjust your 12v Cummins injectors with this injector shim kit. Perfect your injector install with this shim kit.
PDD: 61214191100..
$25.00
Secure your new upgraded fuel injectors with the Power Driven Diesel OEM Replacement 12v Cummins Injector Hold-Down Nut set. Designed for First and Se..
$30.00
PROBLEM: If you are running an aftermarket pump that is mounted external of the fuel tank, you will need to install a draw straw or drill your fu..
$359.00
Have you upgraded from your factory mechanical lift pump to an electric pump? This block off will eliminate the void left by your stock pump. Complete..
$34.99
CUMMINS GEAR REMOVER
VE , P7100 OR VP44 INJECTION PUMPS
Removing the gear from a VE, P7100 or VP44 injection pump requires a spec..
$28.39
12v Return Tee with 2 Push Locks. Push Locks are 5/16"
Return Tee, Cummins 5/16 pushlock w/ tapped hole for injector galley return when elimin..
$17.00
This is for both washers and the check valve.
Number 4 & 5 only.
Cummins part number: 3918188, 3924726..
$181.89
Black anodized lift pump block off fits Cummins 12 valve and 24 valve. O-ring groove machined into back side. No need for leaking gaskets. Comes..
$24.95
Mopar locking fuel cap.
Full stainless steel locking assembly.
Comes with two keys
Meets Federal Fuel Safety Standards
Mopar part number: 8240..
$43.09
12mm banjo bolt to 3/8" pushlock adapter fitting.Add on the optional high flow 12mm x 1.5 banjo bolt and seals for a complete kit. (PDPHF12MM) Pa..
$14.99
The Draw Straw™ 3 Is the threaded version of the original DS2 for use with plastic or metal tanks in Dodge, Ford and GM trucks. This unit is a s..
$57.00
Anodized billet aluminum Y-fitting with barbed ends for pushlock hose.
Fleece Part Number: FPE-FIT-Y06-BLK
..
$23.99