-80x80.jpg)
89-93 Dodge 5.9L Cummins Alliant Power Fuel Transfer Lift Pump
$85.46
- Part Number: AP63478
- Est. Ship Time: Usually Ships In 1-2 Business Days
SSL SECURE
TRANSACTION
AUTHENTIC
PRODUCTS
GUARANTEED PREMIUM
QUALITY
A+ Rating
More from this brand
Starting From $80.21
Starting From $80.21
Starting From $80.21
Starting From $220.27
KIT DOES NOT INCLUDE A MUFFLER!
Features:
*Increased Fuel Economy
*NO MUFFLER
*Lower EGTs
*Mandrel Bent Tubing for Maximum Flow
*Direct Fi..
$413.61
Fuel Injection line for 01-04 GM LB7 6.6L Duramax; cylinders 2 or 7Sold individuallyPart number: AP63723..
$80.21
Fuel Injection line for 01-04 GM LB7 6.6L Duramax; cylinders 3 or 6Sold individuallyPart number: AP63721..
$80.21
Fuel Injection line for 01-04 GM LB7 6.6L Duramax; cylinders 4 or 5Sold individuallyPart number: AP63722..
$80.21
Alliant Power Reman Common Rail Injector for 2001-2004.5 GM 6.6L Duramax LB7 Engines
Alliant Powers remanufactured injectors are built for engines ..
$220.27
The Alliant AP0052 Head Gasket is a direct replacement for your 2001-2010 GM 6.6L Duramax. Alliant Power provides OEM quality, without the OEM price. ..
$41.42
Alliant Head installation kit for 04-10 GM 6.6L Duramax without headgaskets and without studs by Alliant Power.Part number: AP0063..
$565.89
Alliant Head installation kit for 04-10 GM 6.6L Duramax with ARP Studs; without headgaskets by Alliant Power.Part number: AP0046..
$1,392.60
Alliant Power high pressure fuel pump/ exhaust gas recirculation (HPFP/EGR) valve installation kit for 07-10 GM LMM 6.6L Duramax.Part number: AP0..
$70.56
The Alliant AP63470 Exhaust Gas Recirculation (EGR) Inlet Temp. Sensor is a direct-fit replacement for the faulty sensor in your 2008-2010 Ford 6.4L P..
$52.62
The Alliant AP63516 Left Side Injector Harness is a direct replacement for the left side of your 2008-2010 Ford 6.4L Powerstroke. FEATURES:Left S..
$165.68
Alliant Power Fuel System Contamination Kit for 2011-2014 Ford 6.7L PowerStroke Engines Equivalent to Ford OE# EC3Z-9B246-C / EC3Z-9B246-B / EC3Z..
$3,595.41
MINIMAL AVAILABILITY- CALL TO CHECK BEFORE ORDERING!
Alliant Power Fuel System Contamination Kit for 2015-2016 Ford 6.7L PowerStroke Engines Equiva..
$4,122.06
Alliant Power Fuel System Contamination Kit for 2017-2019 Ford 6.7L PowerStroke Engines Equivalent to Ford OE# HC3Z-9B246-B /HC3Z-9B246-A
Did ..
$4,398.75
Kit includes 4 remanufactured injectors, installation kit, fuel return line seal kit and cylinder 3 injector/ egr gasket kit.
Part number: AP..
$1,287.61
This kit includes proper gasket and seals to replace the injectors in an L5P Duramax application for Cylinders 1-4. One kit required per injector.&nbs..
$42.98
Cummins 12 valve and 24 valve lift pump block off plate. Covers the hole on 89-98 12 Valves that would normally have a lift pump bolted into it...
$22.95
The rubber components of the AFC (the diaphragm, foot shaft o-ring, and housing seal) were previously hard to find and often become neglected on aging..
$95.00
Adjust your 12v Cummins injectors with this injector shim kit. Perfect your injector install with this shim kit.
PDD: 61214191100..
$25.00
Secure your new upgraded fuel injectors with the Power Driven Diesel OEM Replacement 12v Cummins Injector Hold-Down Nut set. Designed for First and Se..
$30.00
PROBLEM: If you are running an aftermarket pump that is mounted external of the fuel tank, you will need to install a draw straw or drill your fu..
$359.00
Have you upgraded from your factory mechanical lift pump to an electric pump? This block off will eliminate the void left by your stock pump. Complete..
$34.99
CUMMINS GEAR REMOVER
VE , P7100 OR VP44 INJECTION PUMPS
Removing the gear from a VE, P7100 or VP44 injection pump requires a spec..
$28.39
12v Return Tee with 2 Push Locks. Push Locks are 5/16"
Return Tee, Cummins 5/16 pushlock w/ tapped hole for injector galley return when elimin..
$17.00
This is for both washers and the check valve.
Number 4 & 5 only.
Cummins part number: 3918188, 3924726..
$164.89
Black anodized lift pump block off fits Cummins 12 valve and 24 valve. O-ring groove machined into back side. No need for leaking gaskets. Comes..
$24.95
Mopar locking fuel cap.
Full stainless steel locking assembly.
Comes with two keys
Meets Federal Fuel Safety Standards
Mopar part number: 8240..
$43.09
12mm banjo bolt to 3/8" pushlock adapter fitting.Add on the optional high flow 12mm x 1.5 banjo bolt and seals for a complete kit. (PDPHF12MM) Pa..
$14.99
The Draw Straw™ 3 Is the threaded version of the original DS2 for use with plastic or metal tanks in Dodge, Ford and GM trucks. This unit is a s..
$49.00
Anodized billet aluminum Y-fitting with barbed ends for pushlock hose.
Fleece Part Number: FPE-FIT-Y06-BLK
..
$23.99
Backordered (Updated 1/21/2025)
Fuel Sump
Features:
• 1/2" NPT Outlet Port
• 1/2" NPT Return Port With Stand Tub..
$129.99