-80x80.jpg)
89-93 Dodge 12V Cummins Stainless Throttle Linkage Kit
- Part Number: CC-8993linkage
$35.00
More from this brand
-60x60w.jpg "98.5-02 Cummins Crazy Carls P-Pump Conversion Kit")
Starting From $1,595.00
Starting From $225.00
Starting From $25.00
Starting From $169.00
89-93 Dodge 12V Cummins Stainless Throttle Linkage Kit
If you are looking for an entire kit, CLICK HERE.
Please, select the pieces you need above (prices subject to change without notice).
To verify fitm..
$0.01
This is our 1st gen 89-93 replacement throttle linkage kit. It come with 2 new heim joints, stainless shaft and stainless mounting hardware.Fix that s..
$35.00
This 3600 rpm spring fits all VE Injection pumps on Dodges from 1989 to 1993. The spring will allow the injection pump to fuel all the way to 3600 rpm..
$7.62
1990-1998 5.9L Cummins 12 Valve Module-Cooling Clutch
Mopar part number: 52028760
Image for representation..
$270.51
Cummins 12 valve and 24 valve lift pump block off plate. Covers the hole on 89-98 12 Valves that would normally have a lift pump bolted into it. Allo..
$22.95
This factory OE grid heater should fit Dodge Cummins 12 Valve Cummins with the two piece intake plenum plate.
This fits 1989-1998 Dodge 5.9L 12 Valve..
$337.85
Sick of snapping off the cheap plastic OE oil squirters?
Try these heavy duty BILLET oil squirters from Contagious diesel.
Guaranteed to add AT LEA..
$50.00
FLEETGUARD 3831852S Water-In-Fuel Sensor for 1989-1996 Dodge 5.9L Cummins Turbo Diesel trucks. This Water-In-Fuel Sensor fits the following applicatio..
$40.11
This is a drop-in replacement for 89-93 trucks. It is a "retrofit" part for 94-02 trucks. It only includes the regulator, no plug. Mechanical..
$32.70
1989-2018 Dodge 5.9L & 6.7L Cummins Diesel Main Bearings, Set
Cummins: 4955853
PICTURE FOR REPRESENTATION ONLY!
These bearings are now available CO..
$224.31
89-93 Dodge Reman Injector that will give your truck at least a 40HP increase depending on what other HP Modifications you have. These injectors wil..
$121.60
Hot
This 3200 rpm spring fits all VE Injection pumps on Dodges from 1989 to 1993. The spring will allow the injection pump to fuel all the way to 3200 rpm..
$25.00
12-60lb Intake & Exhaust Valve Springs 89-98 12 Valve Dodge 5.9L Cummins
The seat pressure on these springs is ~150bs at the installed height of 1.95..
$169.98
Fits 1989 to 2002 12 Valve and 24 Valve 5.9L Cummins engines. Billet side cover includes o-ring to seal against block and stainless hardware.
Starts ..
$293.50
Fits 89-93 Dodge VE Pump Equipped 5.9L Cummins Diesel Trucks
Only includes item #10 pictured.
Cummins: 3914385..
$50.00
DISCONTINUEDNeed an alternative ASAP? Click HEREBosch DGK-121 VE Injection pump seal kit.
Case Tractors, Dodge-Cummins Diesel, Onan (Bosch..
$0.00
OUR KIT CONTAINS:RTV SENSOR SAFE ULTRA GRAY GASKET MAKER
KDP TAB
FRONT SEAL
LOCKTITE
The Killer Dowel Pin is responsible for more hear..
$69.00
-250x250w.jpg "98.5-02 Cummins Crazy Carls P-Pump Conversion Kit")
Crazy Carls P-Pump Conversion KitOne of the most complete kits available! All the components needed to install a P7100 on a 98-02 24 valve Dodge Cummi..
$1,595.00
This is our "Mega BHAF" (Big Honkin Air Filter) for 94-02 single turbo trucks. Works with nearly any single turbo from hy35 to S366.This is a FULL 5 I..
$225.00
P7100 1/2" Fuel Inlet Banjo FittingThis barbed push-lock fitting allows the use of 1/2" fuel supply line to the P7100. It is a great way to ge..
$25.00
24 Valve P-Pump APPS KitBrackets, mount and linkage needed to use 24-Valve APPS on P7100 P-Pump.
Retains the factory cables and bellcrank/APP..
$169.00
Dual intake horn promotes max flow to the head at both ends.For use only with our dual intake plate (NOT INCLUDED)Comes with dipstick mount and 2 NPT ..
$324.00
SS Intake Bolt Kit
Say goodbye to rusty shabby stock bolts! Beautiful 304 Stainless Steel hardware kit for installing our intake plate and..
$29.00
Tunnel Ram 12 Valve
This is a Special Order Part, Please Allow 1-2 Weeks for shipping.
The Tunnel Ram 12V is a new patented intake for the 89..
$295.00
Grid Heater Delete Block can be used to remove/replace the stock grid heater during warmer weather (above 30* unless plugged in) as it is not needed t..
$69.00
Crazy Carls "Twin" Turbo Kits
Compound Turbo Kit for Dodge Cummins 94-07.Quality 100% TIG welded constructionKit includes:Hot pipe
1pc cold pipe..
$1,595.00
Intake Horn-12 Valve (94-98)High flow, smooth mandrel bent, tubular steel. Comes with dipstick bracket and two 1/8 NPT ports for accessories s..
$169.00
3.5" intercooler piping kit3.5" intercooler piping kit for 94-02 Dodge Cummins.
The polished aluminum piping looks great and its corrosion..
$249.00
ON BACK-ORDER!!! 5+ Weeks ***LAST UPDATED 10/06/22***Tunnel Ram 24-P 98-02 intake P7100
This is a Special Order Part, Please Allow 1-2 Weeks for ship..
$295.00
High flow, smooth mandrel bent, 100 percent stainless steel.100% TIG welded heavy gauge 409SS tube constructionComes with dipstick bracket and two 1/8..
$169.00
-250x250w.jpg "03-07 Dodge 5.9L Cummins 24V High Flow Intake Horn w/Two Ports")
Intake Horn-CR (03-07)High flow, smooth mandrel bent, tubular steel or 304 stainless steel.100% TIG welded constructionComes with dipstick bracket and..
$169.00
Tunnel Ram CR 03-07 Intake Plate
The Tunnel Ram CR is a new patented intake for the 03-07 Dodge Cummins 24V diesel engine. Proudly made in the U..
$295.00
Adapter sleeve to use 7mm intercooled injectors in a 9mm non-intercooled head.-Sold IndividuallyPart number: D3919358..
$8.22
OEM Bosch Delivery Valve Holder Copper WasherFits 91.5-93 Cummins VE Injection Pumps. May fit other applications. Bosch: 1460105305Price is for ON..
$0.79
OEM Bosch Delivery Valve HolderFits 91.5-93 Cummins VE Injection Pumps. May fit other applications. Bosch: F002D12873Price is for ONE holder. 6 Re..
$10.53
1464651430 Genuine Bosch Coiled SpringPicture for representation only, it looks like this style spring though. ..
$16.99
The Hungry Diesel "THD Injectors" 30HP over stock 6 hole 145 angle VCO for 89-93 Dodge Ram 5.9L 12 Valve Cummins. Core Charge applies, custo..
$450.00
Bosch throttle shaft bushing/ guide for VE Injection pumps. Bosch: 1460324332..
$24.93
1st Gen Cummins 50hp new Bosch OEM injector for 1989-93 6BT engines (also run great on 4BT engines running a VE rotary fuel injection pump). These inj..
$85.67
If you are looking for an easy upgrade that doesn’t cost an arm and a leg then this Performance Fuel Pin and 3200 RPM Spring combo is exactly what you..
$113.95
The Hungry Diesel "THD Injectors" for 89-98 Dodge Ram 5.9L 12 Valve Cummins. Please select truck year and injector sizeCore Charge applies, ..
$470.00
Only from Fleece, a complete fuel supply upgrade kit for your 1991-1998 Dodge Cummins. Includes a new sending unit and float to get your fuel ga..
$869.00
CURRENTLY ONLY FITS 91-98 Model year trucks!PROBLEM: If you are running an aftermarket pump that is mounted external of the fuel tank, you will n..
$359.00
Fits: 1994-1998 Dodge Ram 5.9L 12 Valve Cummins Pacbrake Spring kit for those who tow heavy loads or need more responsive powerPacbrake governor ..
$246.31
-250x250.jpg "94-98 Dodge Ram 5.9L Cummins Premium HD Valve & Governor Spring Kit")
Fits: 1994-1998 Dodge Ram 5.9L 12 Valve Cummins Pacbrake Spring kit for those who tow heavy loads or need more responsive power.Pacbrake governor..
$271.73
Compression SpringNumber 121 in photo ONLY. This is an internal injection pump component. If you are certain this is the item based on the part n..
$2.71
Fuel Injection Pump Retaining PinNumber 120 in the photo ONLY. This is an internal injection pump component. If you are certain this is the item ..
$4.46