-80x80.webp)
89-98 Dodge Ram 5.9L 12 Valve Cummins Keating Titanium Valve Spring Retainers With Hardened Locks
$300.00
- Part Number: 010410-3SET
- Est. Ship Time: Usually Ships In 1-3 Business Days
SSL SECURE
TRANSACTION
AUTHENTIC
PRODUCTS
GUARANTEED PREMIUM
QUALITY
A+ Rating
Proven for over a decade on many top level competition pulling trucks and drag trucks who needed to mount p-pumps or Sigma pumps on 2003 and up 5.9L a..
$1,350.00
Used on competition pulling trucks who need to mount p-pumps or Sigma pumps on 2003 and up 5.9L and 6.7L Cummins common rail engine blocks to utilize ..
$1,829.95
Used on competition pulling trucks who need to mount p-pumps or Sigma pumps on 2003 and up 5.9L and 6.7L Cummins common rail engine blocks to utilize ..
$1,935.00
Used on competition pulling trucks who need to mount p-pumps or Sigma pumps on 2003 and up 5.9L and 6.7L Cummins common rail engine blocks to utilize ..
$1,925.00
One piece billet valve cover fits 4BT Cummins 8 valve. Designed for aftermarket injection lines run either over top or around front and back of cover...
$449.95
One piece billet valve cover fits 4BT Cummins 8 valve. Notched to fit over stock injection lines. We also have non-notched valve covers for engines wi..
$449.95
Fits Cummins 4BT 4 Cylinder engine, includes o-ring to seal against block and stainless hardware. This cover doesn’t have a breather port so it is use..
$275.00
Cummins 12 valve and 24 valve lift pump block off plate. Covers the hole on 89-98 12 Valves that would normally have a lift pump bolted into it...
$24.95
Fits 12 Valve Cummins engine with stock gear housing. Requires factory gasket (not included), can use factory fan with stock 12 valve dampener and bel..
$419.95
One piece billet valve cover fits 1989 to 1993 1st gen 5.9L Cummins 12 valve engines. Notched to fit over stock injection lines. 3.25″ total height wi..
$649.95
One piece billet valve cover fits 1989 to 1993 1st gen 5.9L Cummins 12 valve engines. Notched to fit over stock injection lines.3.25″ total height wil..
$679.95
Fits 12 Valve Cummins engine with stock gear housing. Requires factory gasket (not included), can use factory fan with stock 12 valve dampener and bel..
$419.95
6 o-rings and 6 copper washers to reseal Keating Machine 12 valve billet valve covers.
Keating: (6) M8 copper washers & (6) -158 o-rings
..
$20.00
Fits 12 Valve Cummins engine with stock gear housing. Requires factory gasket (not included), can use factory fan with stock 12 valve dampener and bel..
$439.95
One piece billet valve cover fits 5.9L Cummins 12 valve. Designed for aftermarket injection lines run either over top or around front and back of cove..
$649.95
Hamilton 07-C-Retainer Bronze Cam Thrust Plate for 5.9L & 6.7L Cummins
Part Number: 07-C-Retainer
The Hamilton Cams 07-C-Retainer Bronze Cam..
$89.00
Upgrade your Dodge Ram Cummins engine with Power Driven Diesel’s high-quality Tappets. These 24V/12V 1.30″ tappets offer a larger size com..
$160.00
89-18 Dodge Ram 5.9L + 6.7L Cummins Scheid Diesel Key Set 6B Offset -2 Thru +2 Degree For Billet Cam
Product is intended for COMPETITION or BILLET CAMS W/ a 1/4 inch Keyway
KEY SET, 6B OFFSET -2 THRU +2 DEGREE ..
$70.59
Scheid Diesel Key Set For Cast Cam for 5.9L & 6.7L Cummins engines
Includes- 2.6, 1.82, 1.30, & .078 degree offsets.
Includes instru..
$28.60
This is a complete valve spring kit for your 12 valve from Industrial Injection. 150 lbs. of seat pressure and are designed for engines producin..
$161.94
Heavy Duty 12v Conical Springs, Billet Retainers & Lock Kit
For the 1989-98 12v 5.9L engines.
Spring Specs:
..
$436.55
The factory pushrods in your Cummins are designed for factory power and boost levels. As power increases, safeguard your engine with upgraded pushrods..
$246.72
The factory pushrods in your Cummins are designed for factory power and boost levels. As power increases, safeguard your engine with upgraded pushrods..
$347.76
Fits: 1989-1998 Dodge 5.9L 12 Valve CumminsThe Industrial Injection Cummins 12 Valve Stage 3 Chromoly Pushrods are designed to add Ultimate strength a..
$49.42
These springs utilize the stock keepers and locks. The springs are good to 4500rpm but the stock keepers and locks are not. If you plan on..
$160.00
Power Driven Diesel Hardened Chromoly Spring Retainers & Locks are built for 1989-1998 Dodge 5.9L 12 Valve Cummins engines that need better valvet..
$210.00
Upgrade your 1989-1998 Cummins 12V engine’s performance with our meticulously engineered Performance Pushrods for Cummins 12V Engines...
$260.00
Fits: 1989-1998 Dodge 5.9L 12 Valve Cummins
Upgrade the valve train in your 1989-1998 Dodge 5.9L Cummins 12-Valve with the XDP Pushrods 3/8&qu..
$224.95
Fits: 1989-1998 Dodge 5.9L 12 Valve Cummins
Fortify the valve train in your 1989-1998 Dodge 5.9L Cummins when you install the XDP Performance Valve S..
$399.95
Fits: 1989-1998 Dodge 5.9L Cummins 12 ValveFEATURESSet of 6 springs that can be used on either the exhaust or intake valves in 12-valve 5.9L Cummins e..
$120.95