Sinister Coolant Filter System
Coolant Filter Kit is a bypass-style system that filters a small amount of the coolant on each pass. By using a spin on filter we make it easy for you to change your coolant filter at regular intervals. These filters will remove all solid particles. Install a 5.9 Cummins coolant filtration kit in order to extend the longevity of your cooling system components. Typically you will use 3 filters in the first 9 months. Once the initial 9 months has passed you will only need to change the filter once a year.
- 1 Coolant Filter
- Ball Valves
- Coolant Filter Assembly
- Coolant Hoses
- All Hose Clamps & Hardware for Installation
- Installation Instructions
The coolant filter should be changed out several time within the first year of having the 5.9 Cummins coolant filtration kit installed. The first filter should be changed out within the first 500 miles as it will catch the most debris. The second filter should be changed out at about 3000 miles. The third filter should be changed out after the first year. The intervals may vary depending on the amount of debris in the engine. We recommend cutting open the filters to determine how many times and how often the filter should be changed in the first year. If the filter is still very dirty after the second interval, you may want to do an additional filter change in between the 3000 mile mark and the end of the year. After the initial year, you should change the filter out once every year after that.
Sinister part numbers: SD-COOLFIL-5.9-03-W & SD-COOLFIL-5.9-03-C.