This kit allows you to read the fuel pressure at idle.
Easy to install.
Built for exact fit.
99-03 Ford 7.3L Powerstroke
Picture for representation purposes only, please see below for actual gauge.
Click here for install instructions...
This is the new upgraded fuel pressure regulator kit from Ford. The fragile 6.0 injectors are damaged by any pressure below 45 psi. The original stock pressure regulator sets fuel pressure at 50 psi. This does not leave much room for pressure drop due to hard engine demand. By installing this kit fu..
2005+ Headlight Conversion Kit Upgrade fits 1999-2004 Ford Superduty! * Includes Left and Right 05 Ford Superduty OEM Headlights (Not an aftermarket cheap headlight). * Simple plug and play installation using factory style connectors kit included (9007 to 9008).&n..
High Pressure Oil Rail Ball Tube Repair KitSpecifications:
Comes as a Set of 8
Attaches the fuel injectors to the high pressure oil rail
Manufactured from high-quality materials for durability
MADE IN THE USA!
Optional Installation Tool
DFuser part number: DFR-1002210
Ford OE part number:..
Gauge Dimmer Switch
Easy to install, this wiring harness will control battery voltage to your Gauge lights.
Redesigned for more flexibility when mounting.
You can now mount the dimmer in the dash for easier access.
The dimmer is also heavy duty enough to run several gauges or even several pods..
Combo Special, AIH Plug with boost fitting WITH P0541 code eliminator.
The Air Intake Heater (AIH) found in ’99.5 and up 7.3 Powerstroke (Not for F650/F750) blocks approximately 22% of the airflow through the intake manifold.
The eliminator plug allows for increased airflow and better combustio..
This kit includes two new O-Rings required to fix the fuel leak typically found under your truck due to bad O-Rings. It also includes the yellow drain lever and screws.
We now offer an upgraded VITON o-ring for better longevity, select the option above.
Fits 1999-2003 Ford 7.3 Powerstroke Diesels...
The best fuel system that we can design is our Stage II fuel system. That system is designed for none regulated fuel pumps. Many aftermarket fuel pumps are regulated. As such, the Stage II kit not needed.
We have created a Crossover Line kit to help equalize the fuel pressure between the two cylind..
Ford Powerstroke 6.0L Upgraded Fuel Line Banjo Bolts and Washers
More flow than stock Banjo bolts
Includes 2 Banjo Bolts and 4 Seal Washers
DFuser part number: DFR1001066..
ICP/High Pressure Crossover O-Rings
Did you install HX (High Pressure Crossover) line? Is it leaking?
Did you remove your ICP or does it leak?
Made for exact fit.
Made of Veton (A tough material that resists leaking and tearing).
Built for exact fit...
Direct conversion for those wanting to install 2005-2007 9008 (H13) equipped head lights into H4 (sealed beam) Equipped 1999-2009 Ford F250/F350 Trucks.This kit covers both sides, only one kit is needed per truck.
These pigtails ARE NOT designed for use with higher than stock wattage bulbs (Over 6..
Adding Accessories and switches has never been easier or cleaner in your vehicle
General Information:2008 - 2010 Ford Powerstroke 6.4L Upfitter switches
Features:
Simillar to the 2005 Ford Super Duty came out with a few cool options, and one of the best option FORD gave new cu..
This kit includes two new O-Rings required to fix the fuel leak typically found under your truck due to bad O-Rings. It also includes the yellow drain lever and screws.
Fuel Drain Valve Kit
Fits Powerstroke 7.3L 94-97.
Fixes that Fuel Leak!
Fits 1994-1997 Ford 7.3 Powerstroke Diesels.
Repl..
Application: 2003-2007 Ford Powerstroke F450 V8 6.0Ldfuser High Pressure Oil Rail Ball O-Ring Repair Kit: 904-293, 904-293TSpecifications:
Comes as a Set of 8
Attaches the fuel injectors to the high pressure oil rail
Manufactured from high-quality materials for durability
DFuser part number:..
General Information: The Most Complete Coolant Filter Kit anywhere for your 2008-Up Ford Powerstroke 6.4L Trucks Features: Complete Kit as shown (bolts, washers, nuts, fittings, hose, and clamps)Included Qty-2 shut-off valves to minimize fluid loss when changing filtersIncluded Q..
Quick-Connect ICP Pigtail, for wiring up an 18K module or similar. Avoid splicing wires, allows completely reversible resistor mods. Decreases installation time-much easier to install...
Upgrade Your 2008+ Powerstroke 6.4L Intercooler Pipe .
Features
Mandrel bent from 3" 304SS (Polishable to mirror finish)
The tube utilizes the correct inverted beads to use OEM boots and hardware.
It has no kinks, crimps, or smashed sections.
Includes three pre-welded 1/8" NP fitting..
9007 to 9005/6 Fog light Headlight Heavy Duty Wiring Harness Upgrade!
2-3 Days to Build Before Shipment
Compliments our 9007 Heady Duty Harness, and plugs into the unused 9007 plug on the passenger side.
This kit is designed for those that to run the factory fog lights with headlights.
This ha..
This kit is designed for those that converted their H4 Sealed Beam Work Trucks to use the 05+ headlights with 9008 bulbs.
This harness is Plug and Play and plugs directly into your existing head lamp wiring.
Designed to endure HIGH temperatures for added protection when running high wattage bulbs ..
Reduce Driving Risks
It was reported that an astonishing 75% of all running tires in the USA are under-inflated and 70% of fatal traffic accidents were caused by tire blowouts. With a TPMS, drivers are warned of abnormal tire conditions before it becomes dangerous.
Improve Fuel Economy Today's t..
Made of Durable ABS Plastic. No more messes. Attaches directly to the engine oil filler neck/Valve cover. Works on: Ford: 6.0L, 6.4L, 6.9L, 7.3L Dodge Cummins 5.9L, 6.7L Honda: Accord, Civic, Element, Fit, NSX, S2000 Accura: All (Exc: MDX & RDX) Nissan: Most Jaguar: Some ****MAY NOT FIT SOME APPLIC..
H4 to 9008 (H13) Headlight Heavy Duty Wiring Harness Conversion! Easy to install, this wiring harness will supply battery voltage or more to your headlights. This extra voltage will give you brighter, whiter headlights. Simple plug and play installation using factory style (H4 Harness side ..
Discontinued
This kit is designed for those that converted their 99-04 Trucks to use the 05+ headlights with 9008 bulbs.
This harness is Plug and Play and plugs directly into your existing head lamp wiring.
Anti-Corrosive Lead-Plated terminals for long life and good contact.
Easy to install, t..
Discontinued
This kit is designed for those that converted their H4 Sealed Beam Work Trucks to use the 99-03+ headlights with 9007 bulbs.
This harness is Plug and Play and plugs directly into your existing head lamp wiring.
Designed to endure HIGH temperatures for added protection when running ..
DiscontinuedExclusive kit that traps ~99.99 % of all debris, with our optional patented 74 micron screen filter. Disaster Prevention Kit ( CP4 Bypass Kit )As many 6.7L Powerstroke owners have become painfully aware, the high pressure fuel pump (also known as a CP4 pump) has a des..
Discontinued 3/4/2024
This is a great lighting upgrade for your Ford F250/F350 Super Duty Truck!
This harness is Plug and Play and plugs directly into your existing head lamp wiring.
Uses the factory head light signal wiring to trigger TWO heavy duty 40A water resistance relays.
The..