03-07 Dodge 5.9L Commonrail Cummins Replacement Sensors including rail pressure, fuel control actuator, coolant temperature, throttle position sensors, & more.
Factory OEM Mopar Grid Heater Wiring. Also called a fusible link or Jumper Wire.
Fits 2006-2010 Ram 2500 & 3500 5.9L & 6.7L Cummins trucks.
Mopar part number: 56051717AB
..
This engine air intake heater relay is designed to match the fit and function of the original relay on specified vehicles, and is engineered for durability and reliable performance.Direct replacement - this engine air intake heater relay is designed to match the fit and function of the original rela..
Cummins MAP sensor connector with 6" pigtail for 2003 - 2007 5.9L Cummins engines. Includes heat-sealable butt-style connectors. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement parts you need t..
Replacement connectors with 6" pigtail on either end for use on the Cummins engine and other vehicle applications. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement parts you need to get your tru..
Replacement engine starter connector with 6" pigtail for use on the 2003-2018 Cummins. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement parts you need to get your truck or car back on the road q..
Our replacement connector with 6" pigtail will get you back on the road quickly. Includes heat-sealable butt-style connectors. APPLICATION NOTES2003-2018 Dodge RAM Camshaft Sensor (Mopar p/n: 2872277)2003-2018 Dodge RAM Crankshaft Position Sensor (Mopar p/n: 2872277)2003-2018 Dodge ..
Our 8" extension harness for the 2003-2018 Dodge RAM provides for additional routing clearance to a variety of sensors on the engine including the camshaft, crankshaft, and exhaust pressure sensors. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimp..
Required when running a PHATSHAFT turbo on and 04.5-07 Cummins. These trucks have an electronic wastegate. When installing an aftermarket turbo you will have to unplug the factory wastegate. If you don’t use this plug the truck will throw a code or not boost as high.
Part number: 14532..
Cummins injector harness connector with 6" pigtail for 2006 - 2022 5.9L and 6.7L Cummins engines. Two of these connectors are utilized on the engine and connect the injector harness to the valve cover wiring harness. Includes heat-sealable butt-style connectors. Produced in-house, our manufact..
Fuel heater for use in Fleece Performance heated fuel filter kits including PowerFlo Lift Pumps with a heater provision on the filter base.
Fuel heater specifications:
Temperature switching points: ON: 28.4F +/-5.4F, OFF: 48.2F +/- 5.4F
At typical fuel flow rates a temperatur..
Gain additional flexibility in your harness routings with this 18" extension harness for the Cummins and Duramax rail pressure sensor. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement parts you ..
Our replacement connector with 6" pigtail will get you back on the road quickly. Includes heat-sealable butt-style connectors. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement parts you ne..
Replacement connector with 6" pigtail for use in multiple locations on the Duramax, Cummins, Powerstroke, and other GM vehicles. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement parts you need t..
Mahle OEM quality Valve Cover Gasket Set for 2006-2023 5.9L & 6.7L Cummins.
With Integrated Wire HarnessValve Cover Gasket Material: Molded Rubber/Steel
Cross Reference part numbers:
5264950
Note: These items may come in a Victor Reinz box, as Mahle has acquired Victor Reinz.
Mahle part..
Will work with 1998.5 to 2002 and 2004.5-2023 and up Cummins diesel engines. Will also work on Cummins ISX diesels.
2003-2004 Cummins engines Click Here.
Cummins: 4954905..
98.5 - 2003Dodge 5.9L Cummins Diesel APPS Throttle Position Sensor
This is the part of the TPS (Throttle Position Sensor) or APPS (Accelerator Pedal Position Switch) that actually fails. When you buy it from Chrysler they only sell it with the "Belcrank" at $500 plus dollars, which is a waste of yo..
This direct replacement ABS wheel speed sensor matches the fit and function of an original equipment sensor. Made of quality materials with factory-style electrical connectors, this sensor has been designed and tested to be durable and reliable.Ideal replacement - this ABS wheel speed sensor exactly..
Replacement Fuel Heater and Turbo Wastegate Solenoid Electrical Connector with 6" Pigtail for the Cummins engines. Includes heat-sealable butt-style connectors. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest..
Replacement connector with 6" pigtail for use in multiple locations on MOPAR vehicles including the A/C pressure sensor and transmission pressure transducers. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest qualit..
Replacement Fuel Control Actuator (FCA) for 5.9L Dodge CP3. If you are experiencing a stuble or surge at idle you may have a worn out FCA. This is a direct replacement OEM part.
Replaces OEM Part Number 4932457
Bosch Part Number: 1465zs0062
Superseded Part Number: 0 928 400 666..
FCA (Fuel Control Actuator) Sensor for 03-07 Dodge 5.9L Cummins Diesel
This is a stock replacement part. Some people also call this a fuel pressure regulator.
Part number 4932457
This is Bosch part number 0928400666 in a Cummins Box. Also replaces Mopar 5183245AA...
Interference in the throttle position sensor circuits (APPS) on Dodge Cummins engines from 1994 to 2005 will create false voltage readings in the APPS/TPS circuit and cause the lock-up torque converter to rapidly cycle on and off as you drive. This quick and easy fix removes the annoying and potenti..
Replacement connector with 6" pigtail for use on the Cummins engine and other vehicle applications. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement parts you need to get your truck back on the ..
Replacement connector with 6" pigtail for use on the Cummins engine and other vehicle applications. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement parts you need to get your truck or car back ..
Almost too many applications to list for this multi-purpose two pin connector with 6" pigtail. This connector is used in hundreds of applications on GM and Dodge vehicles. Includes heat-sealable butt-style connectors. Produced in-house, our manufacturing process includes fully automated wire c..
Replacement water-in-fuel sensor for '04.5-'07, 5.9L Dodge Cummins trucks. Genuine Cummins part. Includes o-ring. This sensor is similar to the 3959454S, but has a larger threaded portion and is also about 1/2" longer. Please compare picture to your factory original before ordering for you..
Limited Availability!! Call to Confirm!!03-17 Dodge 5.9L Cummins Diesel Cam or Crank (uses same sensor) Position Sensor or CPS
Replaces: 3408529, 2872277Cummins: 5594275NX
..
Cummins fan connector for 2003 - 2010 5.9L and 6.7 Cummins engines. This is an aftermarket connector.
This is the Engine or truck harness side of the plug
Connector Kit Includes: Picture 3
1x Connector Housing
6x Connector Terminals
6x Terminal Seals
1x Housing Plug ..
Bosch replacement rail pressure sensor for 2003-2007 5.9L Cummins.
Bosch part number: 0281006325 or 0 281 006 325 (replaces 0281002851 or 0 281 002 851).
This is the same as Cummins part number 3949988, but in a Bosch Box (Bosch is the manufacturer of the Cummins part number 3949988)..
The expensive factory Wastegate Solenoid is an unnecessary electronic safeguard and a common failure point which will throw a P0243 DTC failure code. You can easily replace the faulty solenoid with the Rotomaster H1353701N plug which corrects this problem by allowing the wastegate to function on the..
Billet Steel AIT sensor bung for those of you that are making your own turbo piping kits on a 5.9/6.7 Cummins.INCLUDES:stainless socket head screws5.00″ radius to fit nicely on a 5.00" pipe.
Stainless Diesel part number: AITWB..
Billet aluminum AIT sensor bung for those of you that are making your own turbo piping kits on a 5.9/6.7 Cummins.INCLUDES:stainless socket head screws5.00″ radius to fit nicely on a 5.00" pipe.available in billet aluminum or mild steel
Stainless Diesel part number: AITWB-20..
Backordered til Mid April **Updated on 03/14/2024**
00-07 Dodge 5.9L Cummins Diesel Water in Fuel Sensor
This sensor is similar to the 3953517S, but has a smaller threaded portion and is also about 1/2" shorter. Please compare picture to your factory original before ..
This is a pigtail for the 03-12 Cummins Rail Pressure Sensor. Comes unassembled.
Includes:
(3) Cables
(1) Sensor Plug-in
(3) Heat wrap sleeves
(3) Plug Clips
Cummins OEM part number: 5143781AB...
Cummins Injector Connector Harness Plug. Two needed per valve cover. Price is for 1(one) plug only.
Part Number Superseded by: 5395297Cummins part number: 4918587..
Boost Fooler - 2003-2007 Dodge 5.9L CumminsThe Boost Fooler will allow you to utilize your turbochargers full potential without the truck reducing fuel when it gets that extra boost youve been looking for.The Boost Fooler allows higher boost pressures while maintaining the factory fuel pressures. Th..
OEM replacement rail pressure sensor for 2003-2007 5.9L Cummins.
This is the same as Bosch part number 0281006325, but in a Cummins Box (Bosch is the manufacturer of the Cummins part number 3949988)NEW PART NUMBER: 5297641..
Backordered til Late March **Updated on 02/22/2024**
Mopar Oil pressure sensor for 2007-2018 Dodge 5.9L & 6.7L Cummins.
Also called an oil pressure switch.
Superseded Mopar: 68002994AB
Mopar Part Number: 68645517AA
Replaces Cummins: 2882074..