Replacement water-in-fuel sensor for '04.5-'07, 5.9L Dodge Cummins trucks. Genuine Cummins part. Includes o-ring. This sensor is similar to the 3959454S, but has a larger threaded portion and is also about 1/2" longer. Please compare picture to your factory original before ordering for you..
Replacement Cummins throttle linkage rod for 1989 to 1991 Dodge Cummins Turbo Diesel 12 Valve with VE pump. Replaces Mopar 5011955AB. Please compare to your original linkage before ordering. The threaded rod measures 4-1/4" long. Part Number: 4089076..
Replacement Bosch OEM fuel rail for '13-'18, 6.7L Dodge Cummins. Includes rail pressure sensor and fuel pressure limiting valve.This is the same rail that you'd get from Cummins or your Mopar dealer. Bosch is the OEM manufacturer. Part Number: 0445226126Replaces:Cummins: 5295117Chrysler: 6..
Fuel supply tube. This is the steel line that runs up to the fuel filter from the lift pump outlet. Genuine Cummins part. 3918880, 04761978. May also work on other 6BT Cummins with P7100 pump. Part Number: 3918880..
Includes item number 24 in second picture.This item has *Right Hand Thread & is 1 3/4" Long- We are not responsible for return shipping or expediting a new part if you don't check your thread style (right or left) or overall rod end length. Please verify what you have before purchasing.PROD..
Cummins OEM Vacuum Pump Seal Kit For Your 1991.5-2002 Dodge Ram 2500/3500 Cummins Turbo Diesel
This kit includes everything needed to reseal that pesky oil leak from your vacuum pump.
5.9L 24 Valve Cummins 6BT Oil Pump
This pump will bolt right into a 12 valve truck and is a higher volume pump than the stock 12 valve pump, providing better lubrication and oil pressure. A must for high performance competition engines!
Fits:98-02 Dodge 5.9L 24 Valve/24V Cummins Diesels
If you are looking for an entire kit, CLICK HERE.
Please, select the pieces you need above (prices subject to change without notice).
To verify fitment on your exact application, please enter your engine serial number in the field. It is not mandatory, but you do risk receiving incorrect parts if ..
Includes item number 24 in second picture.
* Right Hand Thread & 1 1/4" Long
We have found that SOME trucks may use a different style throttle linkage rod and will not work with these ends.. Please enter your ESN above. If you can't find it.. you may be better off ordering a complete throttle link..
Commonly used on 03-2011 Dodge 5.9L & 6.7L trucks that upgrade to the center dump 3 piece exhaust manifolds. This drain tube is longer than stock to reach the turbo in the higher-mounted position.
This can also be used on 94-02 Dodge 5.9L Cummins trucks utilizing a stock center dump manifold, HOWEV..
This cover screws into the front cover and seals the port access hole in front of the CP3 pump gear and nut. It has a 3/8 drive ratchet indentation for easy tightening. We've seen these covers melt, crack, or get broken from over tightening.
Some of these plugs or covers say 49352..
5.9L 24 Valve Commonrail & 6.7L Cummins 6BT Oil Pump. This pump has straight cut gears. It will not work on a 2002 or older Cummins.
Fits:03-18 Dodge Cummins Diesels
Cummins part number: 5291050Superceded from: 3973398, 4988801..
This outlet elbow will fit on HX35 & HX40 and some S300 turbos that have a v-band compressor outlet flange. One end clamps on with a v-band style clamp, but ONLY includes the elbow, the other end allows for connection to a 3 inch intercooler hose.
This elbow WILL bolt up to an H1C, but it features ..
ONLY number 23 from second picture.
* Left Hand Thread & 1 1/4" Long
We have found that SOME trucks may use a different style throttle linkage rod and will not work with these ends.. Please enter your ESN above. If you can't find it.. you may be better off ordering a complete throttle linkage rod ..
Rebuilding your engine? We recommend replacing this plug any time you have your engine out. It installs behind the engine adapter plate over the back of the cam shaft.
Opitonal oring seal above. (Part number, 3926047)
Cummins part number: 3900687..
Complete Rocker assembly spec'd for the 2011+ 6.7L Cummins diesel.
We have used these assemblies on 1998.5-2010 5.9L & 6.7L engines without issues, and feel they are a superior design compared to what Cummins spec's for those years.
Superceeded part number: 4928698
Please choose which part(s) you need from image.Number 2 - Seal, either side of tube. (Please choose single or both sides) - 3936876Number 3 - Filler to block seal - 3903475Number 5 - Filler elbow - 3921644Number 6 - Tube bracket (factory charge applied) - 3918182Number 7 - Filler cap - 4962608Numb..