-80x80w.png)
-80x80w.png)
-80x80w.png)
98.5-02 Dodge 5.9L Cummins Stainless Steel Intake Bolt Kit
- Part Number: CC-SS Intake Bolt Kit
$29.00
98.5-02 Dodge 5.9L Cummins Stainless Steel Intake Bolt Kit
-60x60w.jpg "98.5-02 Cummins Crazy Carls P-Pump Conversion Kit")
Hot
4000 RPM Governor Spring Kit (4K GSK)The Peak Diesel Governor Spring Kit is a special combination of springs and Piers' unique design on seats.This ki..
$115.00
These extra heavy duty 14mm XHD studs are made from H-11 and have a glass bead finish, 220 ksi min.Recommended for all high performance engine applica..
$790.55
-14 %
2003-2007 Dodge 5.9 Cummins AFE Stage 2 Intake System with Pro Dry 5 Filter MediaFlows 390 CFM vs the stock 180CFM!Click here for installation instruc..
$320.00 $373.75
-35 %
5000 RPM Governor Spring Kit (5K GSK)This 5,000 RPM kit utilizes the stock idle (large) spring and will idle at stock levels. We have installed this k..
$250.00 $385.00
These extra heavy duty 14mm XHD studs are made from L19 and have a glass bead finish, 220 ksi min. Studs hold 80PSI+ Boost STUD SETS INCLUDE: * 26 ST..
$790.55
-12 %
Application: 03-07 Dodge Ram Cummins 5.9L DieselPerformance Intercooler Boot & Clamp KitSuperior material, stays on, holds more boost. Economical al..
$144.95 $165.00
Tunnel Ram CR 03-07 Intake Plate
The Tunnel Ram CR is a new patented intake for the 03-07 Dodge Cummins 24V diesel engine. Proudly made in the USA fr..
$275.00
12 Valve or 24 Valve Applications
This is a plate for COMPETITON use and does not include any air intake temperature sensor hole. It can however be d..
$189.50
Not running a mechanical lift pump anymore? This plate will bolt right in place of your stock lift pump, blocking off the port.
Includes blockoff pl..
$24.99
-14 %
Includes item number 25 in the picture ONLY.
Cummins: 3926103..
$121.00 $140.00
-30 %
This is our 1st gen 89-93 replacement throttle linkage kit. It come with 2 new heim joints, stainless shaft and stainless mounting hardware.Fix that s..
$35.00 $50.00
Hot
High temp oil resistant drain hose, black or blue (color may vary).
This is the correct diameter for the stock 89-02 Dodge 5.9L Cummins turbo drain h..
$15.00
-250x250w.jpg "98.5-02 Cummins Crazy Carls P-Pump Conversion Kit")
Crazy Carls P-Pump Conversion KitOne of the most complete kits available! All the components needed to install a P7100 on a 98-02 24 valve Dodge Cummi..
$1,595.00
This is our "Mega BHAF" (Big Honkin Air Filter) for 94-02 single turbo trucks. Works with nearly any single turbo from hy35 to S366. This is a FULL 5 ..
$225.00
24 Valve P-Pump APPS KitBrackets, mount and linkage needed to use 24-Valve APPS on P7100 P-Pump.
Retains the factory cables and bellcrank/APP..
$169.00
Hot
If you are looking for an entire kit, CLICK HERE.
Please, select the pieces you need above (prices subject to change without notice).
To verify fitm..
$0.00
Crazy Carls P-Pump Conversion KitOne of the most complete kits available! All the components needed to install a P7100 on a 98-02 24 valve Dodge Cummi..
$1,595.00
-6 %
This throttle cable runs from the throttle pedal in the cab to the P7100 injection pump.
This cable can also be used for VP44 to P7100 Conversion...
$89.70 $95.10
Kit IncludesLines, Clamped TogetherMild Steel available in:.078
.084
.093Stainless Steel Available in:.093
.120DOES NOT INC..
$559.00
P-pump oil inlet fitting with oil restriction. If you choose to supply oil to your P7100 injection pump from the drivers side, this fitting is a must...
$19.95