Air Intake Systems for the 2008-2010 Chevy 6.6L LMM Duramax Diesel.
High flow performance air intakes & filters allow your engine to breathe, resulting in better low-end power, faster turbo spool-up, lower egt's, and better fuel economy!
Brand: Performance Engineering
Part Number: PE-69-PCV-RRKIT
PCV Cap is machined out of a single piece of aluminum stock and has a pre-installed o-ring for a 100% seal-tight fitment. Get rid of that nasty, black, oily soot that is all over your engine bay for good with this kit! Included in the kit:Low pressure hydraulic hoseBillet PCV CapAssembly hardwa..
$115.00
Brand: Wehrli Custom Fabrication
Part Number: WCF100341
LLY/LBZ/LMM 3.5" Intake Horn for VGT Turbo.
Does not have PCV provisions or resonator box provisions.
Includes:
3-1/2" Intake Horn
O-Ring
Powder Coating
WCFAB part number: WCF100341
NOTE: ONLY fits with a WCFab 3" y-bridge kit or WCFAB Basic Intercooler Pipe for Factory Y-Bridge.
Click..
$222.13 $229.00
Brand: Absolute Performance
Part Number: ABSO-CCVFITTING
Went with an aftermarket kit and are tired of the oil drip and fumes? This fitting fixes all of that! Mounts your discharge line to your exhaust system, routing the vapors into the exhaust stream where they can burn off and not be noxious to you anymore. Fitting is designed to be welded or bolted on..
$0.00
Brand: S&B Filters
Part Number: 75-50LMM-SB
The S&B Cold Air Intake for the 2007-2010 6.6L Duramax LMM has been updated. Featuring a large intake box with a huge air inlet that feeds cool air directly to the filter, eliminating power robbing engine heat.
S&B Cold Air Intakes increase cool airflow to your engine while still protecting it from..
$329.00
Brand: Wehrli Custom Fabrication
Part Number: WCF100639
LMM Stage 2 Intake Kit with turbo inlet horn for factory turbo. Includes:
4" Intake
3-1/2" Intake Horn
Dry Air Filter
Outerwear's Pre-Filter Cover
O-Ring
Silicone Boot
T-Bolt Clamps
Powder Coating
WCFAB part number: WCF100639
Click here for Wehrli powder coat samples
Wehrli Custom P..
$542.23 $559.00
Brand: Pusher
Part Number: PGD0610SM
The Pusher SuperMax Y-bridge is the first true “Y” bridge introduced to the performance diesel truck market, and remains the pinnacle in air delivery to the factory Duramax intake plenums. This system combines the SuperMax Y-bridge with a full 3” charge tube, maximizing air delivery from the interco..
$699.99
Brand: Wehrli Custom Fabrication
Part Number: WCF100715
High-Flow Intake Bundle Package for 2007.5-2010 LMM Duramax. Save $60 By Buying through this Bundle!
Includes:
3" Fabricated Y-Bridge
3" Cold Side Intercooler
3" Hot Side Intercooler Pipe
4" Intake
3-1/2" Intake Horn
Dry Air Filter
Outerwear's Pre-Filter Cover
3" Stainless Turbo Downpipe
..
$1,677.23 $1,729.00
Brand: Deviant Race Parts
Part Number: 76151
Deviant Race Parts High Flow Y-Bridge for 06-10 6.6L GM Duramax LBZ/LMMHaving trouble keeping your factory Y-Bridge from blowing out Replace it with this fabricated, high performance unit from Deviant Race Parts. Also compatible with factory EGR system.Features:20-30 hp dyno proven gainsTIG WeldedCN..
$650.00 $682.50
Brand: AFE
Part Number: 46-20049
The aFe intercooler tube represents the next generation of Diesel performance products. This intercooler tube produced 16hp and 49lbs. x ft. of torque on the dyno while outflowing the factory intercooler tube by 67%. Not only will you get increased performance but you will also see lower EGT's..
$262.99 $312.50
Brand: HSP Diesel
Part Number: 402-HSP
The HSP LMM Cold Air Intake for your 2007.5-2010 GM 6.6L Duramax LMM adds a custom look under the hood while increasing performance! Featuring 4" mandrel bent pipe, HSP's intakes increase flow by removing restriction while also pulling in cold, fresh air from the headlight bezel and fender port. The..
$357.00 $430.00
Brand: BD Power
Part Number: 1046277
It doesn't matter if you're towing up a mountain, running 9 seconds on the track or pulling your best sled distance ever - get the hose and clamp kit designed to withstand over 100 PSI of boost so you're not left stranded. Our Hose and Clamp Kits feature:
4-ply and 5-ply Blue Nomex silicone boot..
$208.80 $220.73
Brand: AiRaid
Part Number: 720-472
Air Filter; Flg-6 in.;B-11 in. x 8 in.;T-7 1/8 in. x 4 1/8 in.;L-10 in.
This filter will replace air cleaners for SynthaFlow part numbers:
200-219 - 07-10 GM 6.6L Duramax
200-287 - 06-07 GM 6.6L Duramax
200-289 - 06-07 GM 6.6L Duramax
200-233 - 09-13 GM 6.0/6.2L/Others Gas Engine
200-235 - ..
$101.35 $126.69
Brand: Wehrli Custom Fabrication
Part Number: WCF100635
LMM Duramax 4" Intake Kit for factory turbo. Includes:
4" Intake
Dry Air Filter
Outerwear's Pre-Filter Cover
Silicone Boot
T-Bolt Clamps
Powder Coating
WCFAB part number: WCF100635
Click here for Wehrli powder coat samples
Wehrli Custom Powder Coating is housed under the same roof as ..
$387.03 $399.00
Brand: G&R Diesel
Part Number: 661020
We have developed a heavy duty LBZ-LMM Duramax cold side intercooler tube that replaces the factory tube. From the factory, GM uses a tube with plastic quick connect ends and a light duty intercooler connector. Our tube uses CNC machines billet connectors on each end and a heavy duty 5 ply custom ma..
$289.00
Brand: AiRaid
Part Number: 860-161
AiRaid Replacement Air Filter
Fits:
CHEVROLET SILVERADO 2500 HD 2006-2010 V8 6.6L
CHEVROLET SILVERADO 2500 HD CLASSIC 2007-2007 V8 6.6L
CHEVROLET SILVERADO 3500 2006-2010 V8 6.6L
CHEVROLET SILVERADO 3500 CLASSIC 2007-2007 V8 6.6L
GMC SIERRA 2500 HD 2006-2010 V8 6.6L
GMC SIERRA 25..
$93.27 $116.59
Brand: K&N Filters
Part Number: 57-3066
The 57 Series Generation II air intake, also referred to as an FIPK®, is K&N's ultimate performance product. These performance intakes are designed to increase power by as much as 10%. 57 Series FIPK's are CARB exempt, street legal in all 50 US states, come with a Million Mile Limited Warranty..
$339.99 $615.49
Brand: Wehrli Custom Fabrication
Part Number: WCF100341SD
Scratch or Dented Item (Pictured); Price Reduced
LLY/LBZ/LMM 3.5" Intake Horn for VGT Turbo.
Does not have PCV provisions or resonator box provisions.
Includes:
3-1/2" Intake Horn
O-Ring
Powder Coating
WCFAB part number: WCF100341
NOTE: ONLY fits with a WCFab 3" y-bridge kit or WCFAB Bas..
$208.55 $215.00
Brand: AFE
Part Number: 11-10101
Constructed with 100% polyurethane on top and bottom, this high flow "oil-free" OE replacement performance filter will outflow stock paper filter for improved horsepower and torque. Two layers of progressively finer mesh synthetic media provide maximum convenience and easy maintenance. Washable ..
$78.00 $97.50
Brand: AFE
Part Number: 10-10101
Constructed with 100% polyurethane on top and bottom, this high flow, oiled OE replacement performance filter will outflow stock paper filter for improved horsepower and torque. Five layers of progressively finer mesh cotton gauze media provide maximum airflow for best performance results. Washa..
$78.00 $97.50
Brand: AiRaid
Part Number: 200-215
AIRAID Cold Air Dam Intake System; Incl. Intake Tube; Easy To Install w/Basic Hand Tools
Fits:
CHEVROLET SILVERADO 2500 HD 2007-2010 V8 6.6L
CHEVROLET SILVERADO 3500 2007-2010 V8 6.6L
GMC SIERRA 2500 HD 2007-2010 V8 6.6L
GMC SIERRA 3500 2007-2010 V8 6.6L
Part number: 200-215
Open ..
$298.55 $373.19
Brand: Pusher
Part Number: PGD0610YB
Properly guides air into each cylinder head while tremendously increasing air flow.Compatible and highly recommended with the Pusher Max Compound Turbo System.Flow bench tested and proven to produce 45% more air over the OEM parts when subjected to the same inlet boost pressure (independently tested..
$499.99
Brand: Injen
Part Number: EVO7003
The Injen Evolution Air Induction System for your 2007.5-2010 GM 6.6L Duramax LMM is a dyno tuned intake system that's designed to enhance air flow for maximum horsepower and torque gains on your truck. Designed using the latest CAD software, the Rotomolded, cross-linked polyethylene construction al..
$299.95
Brand: AFE
Part Number: 10-10101
Constructed with 100% polyurethane on top and base, this high-flow, oiled OE replacement performance filter will outflow the stock paper filter by up to 17% for improved horsepower and torque. The PRO 5R air filter uses five layers of progressively finer mesh cotton gauze media to provide maximum ai..
$78.00
Brand: Banks Power
Part Number: 42172
Testing, testing & more testing.
Banks Ram-Air Intake Systems are tested and proven. They start out as CAD software prototypes and are put through flow simulations. After a hardware prototype is made, it's tested on a flowbench. Then it's tested on the vehicle. And finally, Banks' density-tests the..
$429.00 $476.67
Brand: AiRaid
Part Number: 861-161
AiRaid Replacement SynthaMax Air Filter
SynthaMax:
The SynthaMax filter media consists of an inner and outer layer of wire mesh for durable support of filtration media as well as overall filter durability. This filter construction will not deform or collapse under high air flow. The inner filte..
$106.31 $132.89
Brand: AiRaid
Part Number: 201-219
AIRAID MXP Series SynthaMax Cold Air Dam Intake System; Incl. Intake Tube
SynthaMax:
The SynthaMax filter media consists of an inner and outer layer of wire mesh for durable support of filtration media as well as overall filter durability. This filter construction will not deform or collapse unde..
$421.35 $526.69
Brand: AiRaid
Part Number: 200-219
AIRAID MXP Series Cold Air Dam Intake System; Incl. Intake Tube
Fits:
CHEVROLET SILVERADO 2500 HD 2007-2010 V8 6.6L
CHEVROLET SILVERADO 3500 2007-2010 V8 6.6L
GMC SIERRA 2500 HD 2007-2010 V8 6.6L
GMC SIERRA 3500 2007-2010 V8 6.6L
Part number: 200-219
Open PDF Install Directions ..
$412.63 $515.79
Brand: AiRaid
Part Number: 201-215
AIRAID Cold Air Dam Intake System; SynthaMax; w/o Intake Tube; Easy To Install w/Basic Hand Tools;
SynthaMax:
The SynthaMax filter media consists of an inner and outer layer of wire mesh for durable support of filtration media as well as overall filter durability. This filter construction will n..
$307.27 $384.09
Brand: Pusher
Part Number: PGD0610BT
The Pusher Max Passenger-Side Charge Tube is the ultimate solution to improving air delivery to your factory two-piece intake bridge. Unlike other options on the market the Pusher Max charge tube properly supports the intake bridge, preventing any separation and subsequent boost leaks.Our charge tub..
$349.99
Brand: Edge Products
Part Number: 28172
The all-new Edge Jammer Cold Air Intake is designed to optimize your truck's performance and pairs perfectly with all of our tuning products!Introducing Edge’s all-new Jammer Cold Air Intake (CAI) systems. The Jammer CAIs revolutionary design improves airflow by blocking hot air and using cooler, d..
$425.95 $443.95
Brand: XDP Diesel
Part Number: XD185
The XDP Billet PCV Re-Route Plug XD185 provides a custom look under the hood of your 2004.5-2010 GM 6.6L Duramax. Featuring an anodized black finish and a billet aluminum construction, the XDP Re-Route Plug installs easily and is held securely in place by its built-in o-ring.
FEATURES:
Anodize..
$13.95
Showing 1 to 31 of 31 (1 Pages)