Shop By Category
Your Cart

2007.5-2010 LMM Duramax Turbos & Accessories

Brand: Pacific Performance Engineering Part Number: 118062030
This 4-piece kit is constructed of multi-layered 301 stainless steel. The rolled edges create a tight seal at the manifold and turbo inlets. PPE High-Performance Up-Pipe Gaskets are made to handle extreme changes in temperature. Fits both GM stock and PPE Up-Pipes.  GM Equivalent P/N: ..
$26.99
Brand: Merchant Automotive Part Number: 10245
Remove the Stock Turbo Resonator with this cap to Clean up under your hood...
$13.08
Brand: KC Turbos Part Number: 300xxx
This is a balanced drop in 10 blade turbine upgrade for the 13 bladed 2003-2007 turbos. We offer both the 64 and 66mm turbines. This is a nice upgrade for the DIY builder that wants a little more flow on the top end and likes the sound of the 2003 whistle turbo. **If you'd like to add a ..
$200.00
Brand: KC Turbos Part Number: 300018
KC 360 Turbo Rebuild kit - 6.0 POWERSTROKE, LBZ & LLYFeatures & Details:Upgraded 360 degree thrust bearingNew thrust collarNew oil slingerNew piston ringsNew journal bearings & sleeveNew compressor cover o-ring & backing plate o-ring***Please note that there is no warranty on an..
$79.00
Brand: KC Turbos Part Number: 300109
This is an upgraded unison ring made to prevent sticky vanes and improve the functionality of your VGT turbo. This unison ring is made of billet stainless steel and is made to resist corrosion. This ring is just slightly larger than stock to reduce problem with the amount of slop that the stock unis..
$159.00
Brand: KC Turbos Part Number: 300127
This is a more inclusive rebuild kit that includes all o-rings, seals, bearings, and bolts needed for the internal rebuild of a turbo and the bearing housing.  ***Please note that there is no warranty on any DIY products***   Features & Details: ..
$99.00
Brand: Wehrli Custom Fabrication Part Number: WCF100412
LLY/LBZ/LMM 3.5" Intake Horn for VGT Turbo. Does not have PCV provisions or resonator box provisions. Includes: 3-1/2" Intake Horn O-Ring Powder Coating WCFAB part number: WCF100341 NOTE: ONLY fits with a WCFab 3" y-bridge kit or WCFAB Basic Intercooler Pipe fo..
$377.33
Brand: Bostech Part Number: TBC0166710
Direct fit replacement variable vane position sensor for 04.5-10 Duramax. Turbocharger Vane Position SolenoidBrand: BostechCondition: NewLimited 13 month / unlimited mileage warrantyEngine Fitment:GM Duramax LLY / LBZ / LMM / LMLCross reference number: 19210790Part number: TBC0166710..
$198.95
Brand: Diamond Eye Part Number: 321056
Diamond Eye Performance has developed a Turbo Direct pipe for the ’04- '010 Chevy/GM LLY, LBZ, & LMM Diesel Exhaust systems.   It features CNC machined end-forms for precise fit, mandrel bent tubing for smoother flow from the turbo and is covered with special thermal resistant..
$296.55
Brand: Dorman Products Part Number: 904-125
This turbocharger oil line is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance. Direct replacement - this turbocharger oil line matches the fit and function of the factory part on specified y..
$67.30
Brand: FloPro Part Number: 10100
2004.5-2010, 6.6L, 2500/3500, 3" Turbo Direct Pipe. Competition Exhaust Pipes Simple bolt on installation for competition use Built using heavy duty steel in 3” diameter Utilizes OE style connections to ensure a proper fitment   Flo Pro part number:  10100..
$182.15
Brand: Pacific Performance Engineering Part Number: 117000500
RThe PPE 117000500 3" Stainless Steel Downpipe for your 2004.5-2010 GM 6.6L Duramax allows you to removed your crushed oval stock downpipe and replace it with a smooth round, long lasting 304 stainless steel down pipe. Spiral wrapped with titanium woven thread for superior heat that's held in place ..
$134.99
Brand: General Motors Part Number: 97303638
Turbo Drain Line LLY/LBZ/LMM Part Number: 97303638..
$90.48
Brand: Wehrli Custom Fabrication Part Number: WCF100120
Replace the restrictive crushed factory down pipe with this full 3" down pipe. High Temp Ceramic Coated for protection. For use with factory turbo or factory style drop in turbo. No tuning required. -3" Down Pipe -Heat Wrap & Clamps -Black Ceramic Coating -No tuning require..
$189.15
Brand: XDP Mfg Part Number: XD184
The XDP Billet Turbo Resonator Delete Plug XD184 for your 2004.5-2010 GM 6.6L Duramax allows you to clean up the under-hood of your truck by removing the factory turbo resonator. Made from billet aluminum, the XDP resonator delete features an anodized black finish and a built-in o-ring seal.     FEA..
$22.95
Brand: Garrett Part Number: 792593-0001
04.5-16 6.6L GM Duramax / 03-07 6.0L & 11-19 6.7L Ford Powerstroke OE Garrett VGT Solenoid   Cross References: 12642646 1838525C1 1841228C91 1855648C1 1855683C91 1876070C91 3C3Z6F089AA 3C3Z-6F089-AA 5C3Z6F089A 5C3Z-6F089-A 5C3Z6F089AA 5C3Z6F089B 5C3Z6F089BA 711122-0008..
$198.75
Brand: Dirty Hooker Diesel Part Number: 800-0199
Discontinued (Updated 6/6/25) Replace your stuck or inoperative VGT actuator with this direct replacement from DHD. Garretts GT37 series VGT turbos are known for having stuck or inoperative vanes. Its not uncommon for this actuator to be the reason. This new actuator from DHD will restore VGT fun..
$0.00
Brand: Garrett Part Number: 763527-0712
FIts: 2004.5-2016 GM 6.6L Duramax (2004.5-2005 Requires Adapter, Garrett part number 771864-0001) Garrett 763527-0712 Turbo Vane Position Sensor replaces the failed factory sensor in your 2004.5-2016 GM 6.6L Duramax. This genuine Garrett replacement restores factory operation and provides you wi..
$290.66
Brand: General Motors Part Number: 97331137
Use the GM GM 97331137 Turbo Oil Feed Banjo Seal when you replace the turbocharger in your 2004.5-2016 GM 6.6L Duramax. This is a genuine OE replacement and installs, fits, and seals, just like the factory component.FEATURES:Genuine OEM ReplacementDirect-Fit InstallationPart number: 97331137..
$9.03
Brand: Pacific Performance Engineering Part Number: 116008000
PPE and Garrett have had a long and beneficial relationship. Having worked together on many projects over the year and knowing the quality of the Garrett is why PPE choses to use Garrett turbochargers as their turbocharger of choice in their GT42R Series Turbo Kit with Garrett GT42R Turbo. The kit c..
$4,226.39
Brand: AFE Part Number: 49-44034
The new Mach FORCE XP turbo down-pipe is engineered to perform in the most extreme environments. This down-pipe is constructed from ceramic coated 3" mandrel bent 409 stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, quicker turbo spool times and lower EGT’s...
$420.00
Brand: Dorman Products Part Number: 904-137
This turbocharger oil line is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.   Direct replacement - this turbocharger oil line matches the fit and function of the factory part on s..
$103.79
Brand: Merchant Automotive Part Number: 10124
2007.5-2010 GM Duramax 2500/3500 Diesel 6.6 Turbo Install Gasket Kit LMM Contains Gaskets for: Manifold to Up Pipe Up Pipe to EGR Up Pipe to Turbo Both Drain tube gaskets Banjo Washers Part number: 10124..
$73.99
Brand: Pacific Performance Engineering Part Number: 116111800
50 States Emissions Legal (E.O. D-701-34)PPE High-Flow Manifolds are made from cast, high-sil moly. The PPE Up-Pipe bellows are internally-sleeved, made from aircraft-grade 304 stainless steel, and designed with increased inner diameter for higher flow. The entire Manifold and Up-Pipe exhaust system..
$1,121.39
Brand: Mahle Part Number: G32761
Replace the worn turbocharger flange gasket in your vehicle when you install the Mahle G32761 T6 Turbocharger Flange Gasket. Designed as an OEM replacement to damaged gaskets, the Turbocharger Flange Gasket meets factory specifications. Constructed from stock materials, or better, the Turbocharger ..
$6.96
Brand: Thermal Zero Part Number: TZ0410LBM-L
Specifically designed to fit the 2004.5 to 2010 Duramax LLY LBZ and LMM VGT Turbochargers. The blanket covers the entire exhaust housing precisely covering all the important areas to reduce heat in the engine bay directly from the turbo by up to 80% and to surrounding components. (Far better than th..
$199.00
Brand: Turbo Performance Products Part Number: TS-1001-N
The Turbo Sock will help spool the turbo faster, lower intake air charge temps, lower under hood temps, stop turbo heat from melting wire and electronics. Comes with 2 stainless ties for installation. The Turbo Sock is over 1/2" thick made from 3 layers of silica material rated at 1800 degrees c..
$94.99
Brand: AVP Part Number: AVPGT37UR-D
Unison for the stock Chevy/GMC 6.6L Duramax LLY, LBZ & LMM Garrett GT3788VA turbo. If you replacing the vanes in your turbo, it is a good ideal to go ahead and change out the Unison Ring as well.AVP: GT37UR-D..
$84.99
Brand: Merchant Automotive Part Number: 10384
Replace the Stock Turbo Resonator with this Billet Delete Plug to clean up under your hood! Replace the Stock Turbo Resonator with this Billet Delete Plug to clean up under your hood! TIP:"To help install, start with engine at operating temp, keep plug at room temp or colder"  ..
$30.42
Brand: MBRP Part Number: GM8424
3" Down Pipe Chevy/ GMC 2004.5-2010 (LLY/ LBZ/ LMM) While the search for more power for your LLY, LBZ or LMM Duramax powered vehicle usually leads you down the path of exhaust, intake and tuner, one item that is often overlooked is the factory restrictive turbo direct pipe. MBRP has addressed this ..
$229.99
Brand: Wehrli Custom Fabrication Part Number: WCF100733
For use on 2004.5-2016 Duramax VGT Style Turbochargers. • Easy to install blanket keeps heat inside the turbo housing• Decreases under hood temperatures• Internally rated to over 2500°F direct heat• Durable high temperature exterior shell material• Stainless steel rivet fasteners• Handmade in t..
$150.35
04.5-2010 GM Duramax Custom Turbo Resonator Delete Cap
-10 %
Brand: Pure Diesel Power Part Number: CUSTOMRescap
Replace the Stock Turbo Resonator with this custom Delete Cap to clean up under your hood! Made out of heat dissipating aluminum. Available in several varieties, select option above.* Hose clamp not included unless option selected above. Includes full black and white instructions. Can be installe..
$76.50 $84.99
Brand: DieselSite Part Number: DSBLC4
Ever wonder if you have a boost leak or you know you have one, but can't find it? We finally have the tool needed to locate all boost leaks, no matter how small in minutes. This is a great tool to use anytime you have opened the system for anything. Even the smallest of leaks (1-3lbs) can cause trem..
$79.00
Brand: Fleece Performance Part Number: FPE-T4PED-SPACER1.0
This black 1.0in T4 Pedestal Spacer is designed for use with T4 Turbos installed on Duramax engines when an extra inch of elevation out of the valley is required, although it could be used in any T4 application.  NOTE: A T4 gasket should be used on the top and bottom of the spacer to provide..
$99.74
Brand: Wehrli Custom Fabrication Part Number: WCF100731
For use on all T4 Flange style exhaust housings found on S300, S400, garrett, holset, precision turbo chargers.• Easy to install blanket keeps heat inside the turbo housing• Decreases under hood temperatures• Internally rated to over 2500°F direct heat• Durable high temperature exterior shell materi..
$130.95
Brand: Wehrli Custom Fabrication Part Number: WCF100732
T6 Exhaust Housing Blanket for use with any S500, S400, GT50, GT55, Precision T6 exhaust housings.• Easy to install blanket keeps heat inside the turbo housing• Decreases under hood temperatures• Internally rated to over 2500°F direct heat• Durable high temperature exterior shell material• Stainless..
$150.35
4.21" S400 Compressor Outlet To 3" Aluminum P1P Flange & Clamp
-10 %
Brand: Position 1 Performance Part Number: P1S4COALM3
4.21" S400 Compressor Outlet To 3" Aluminum P1P Flange & Clamp   P/N: P1S4COALM3..
$61.60 $68.44
4.21" S400 Compressor Outlet to 3.5" Aluminum P1P Flange & Clamp
-10 %
Brand: Position 1 Performance Part Number: P1S4COALM3.5
4.21" S400 Compressor Outlet to 3.5" Aluminum P1P Flange & Clamp   P/N: P1S4COALM3.5..
$65.85 $73.14
Brand: Fleece Performance Part Number: FPE-T4PED-SPACER1.5
This black ceramic coated 1.5in T4 Pedestal Spacer is designed for use with T4 Turbos installed on Duramax engines when an extra inch of elevation out of the valley is required, although it could be used in any T4 application. NOTE: A T4 gasket should be used on the top and bottom of the spacer t..
$119.74
P1P T6 S400 5.75" Half Marmon To 5" Mild Steel Exhaust Outlet Flange & Clamp
-10 %
Brand: Position 1 Performance Part Number: P1T6MS5FL
P1P T6 S400 5.75" Half Marmon To 5" Mild Steel Exhaust Outlet Flange & Clamp   P/N: P1T6MS5FL..
$48.10 $53.47
P1P T6 S400 5.75" Half Marmon To 5" Stainless Steel Exhaust Outlet Flange & Clamp
-10 %
Brand: Position 1 Performance Part Number: P1T6SS5FL
P1P T6 S400 5.75" Half Marmon To 5" Stainless Steel Exhaust Outlet Flange & Clamp   P/N: P1T6SS5FL..
$69.55 $77.26
T4 S400 4.62" Half Marmon To 4" Stainless Steel P1P Exhaust Outlet Flange & Clamp
-10 %
Brand: Position 1 Performance Part Number: P1T4SS4FL
T4 S400 4.62" Half Marmon To 4" Stainless Steel P1P Exhaust Outlet Flange & Clamp   P/N: P1T4SS4FL..
$61.00 $67.77
T6 S400 5.75" Half Marmon To 4" Stainless Steel Exhaust Outlet P1P Flange & Clamp
-10 %
Brand: Position 1 Performance Part Number: P1T6SS4FL
T6 S400 5.75" Half Marmon To 4" Stainless Steel Exhaust Outlet P1P Flange & Clamp   P/N: P1T6SS4FL..
$82.50 $91.68
Brand: Fleece Performance Part Number: FPE-TURBO-INST-KIT-DMAX
**Discontinued**The Fleece Performance Duramax S300-S400 Turbo Installation Kit Contents: Dash 6 Oil Feed Line 90 Degree Oil Feed Fitting Engine Block Oil Feed Fitting Turbo Drain Flange Upper Turbo Drain Flange Lower Turbo Drain Flex Extension (2) 3/8 Turbo Drain Bolts (2) Turbo Drain Ex..
$0.00
Brand: Fleece Performance Part Number: FPE-34132
DISCONTINUEDOur replacement lower turbo drain tube with integrated O-ring seal fits the LB7, LLY, LBZ, LMM Duramax platforms.Part number: FPE-34132..
$0.00
Brand: Fleece Performance Part Number: FPE-DTDT-0110
**Discontinued**Our Duramax Turbo Drain Tube Kit is designed to take the headache out of installing/removing the factory drain tube that is difficult to get to and tends to get damaged during the install/removal process. Simply bolt the turbo drain nipple to the turbo, install the lower turbo drain ..
$0.00
Brand: Pacific Performance Engineering Part Number: 116006000
Discontinued (Updated 3/10/2025) When you live and breathe diesel power, there is no substitute for size when it comes to your turbochargers. Our customers want BIG. So we are giving every Duramax diesel owner the chance to super-size their turbo to the equivalent of a 42 or 45 Series turbo by us..
$0.00
Brand: Wehrli Custom Fabrication Part Number: WCF1004S400
Discontinued Duramax Install Kit for S400 Turbo. Turbo Not Included. Kit Includes: 3" Fabricated Y-Bridge Hot and Cold Side 3" Inter cooler Pipes 3" Down pipe (Mates to Exhaust Flange) T4 Pedestal 5" Intake with S&B air filter Stainless Braided Oil Feed a..
$0.00
Showing 49 to 96 of 104 (3 Pages)