



Dirty Hooker Diesel DHD 3" Reinforced Intercooler Boot Coupler
$30.00
- Part Number: 036-0261282
- Est. Ship Time: Usually Ships In 1-2 Business Days
SSL SECURE
TRANSACTION
AUTHENTIC
PRODUCTS
GUARANTEED PREMIUM
QUALITY
A+ Rating
DHD 036-0261282 3" Reinforced Charged Air Cooler Silicon Coupler Black
This is DHD's most popular silicone boot! DHD's double hump 3" coupler provides maximum strength and flexibility! Each DHD boot is also wrapped with a steel support ring too handle extreme amounts of boost pressure.
We use this boot exclusively for all our in shop repairs.
Features:
- 4" Overall Boot Length
- 3" ID Both Ends
- 1-1/8" Clamping Surface on each End
- Twin Hump Wire Ring Reinforced
- 4 Corded Silicone Layers
DHD: 036-0261282

Tags:
Dirty Hooker Diesel
, 3" Intercooler Boot
, Reinforced Intercooler Boot Coupler
, Reinforced Intercooler Boot
, Reinforced Boot
Get the most out of your 2004.5-2005 GM 6.6L Duramax LLY with the HSP LLY Max Flow Bridge. Built to mate to your factory cold side intercooler pipe, H..
$605.64
These 304 Stainless Steel T-Bolt Clamps are perfect for high pressure/high heat intake or exhaust pipe coupling.These clamps are smooth on the ins..
$3.99
These 304 Stainless Steel T-Bolt Clamps are perfect for high pressure/high heat intake or exhaust pipe coupling.These clamps are smooth on the ins..
$3.99
Chevy/GM Duramax 6.6L, 8 pieces - Flywheel Bolt KitSpecificationsUHL
1.600˝Thread Size
M16 x 1.5Wrenching
5/8˝ARP par..
$93.88
Fits: 2001-2007 GM 6.6L Duramax LB7/LLY/LBZThis Cometic C15043 Engine Oil Pan Gasket is the perfect component 2001-2007 GM 6.6L Duramax. These gaskets..
$19.03
The MAHLE 67775 Engine Timing Cover Seal is a an OEM replacement for your 2001-2016 GM 6.6L Duramax. Built to factory specifications, the En..
$37.29
Fits: 2001-2016 GM 6.6L Duramax LB7/LLY/LBZ/LMM/LML (1.05mm)The Mahle Wave-Stopper Cylinder Head Gasket is a top-quality replacement for the head ..
$87.95
Don't fall victim to a faulty gasket when you add the MAHLE C31900 Thermostat Housing Gasket to your 2001-2016 GM 6.6L Duramax. The Thermost..
$6.69
Industrial Injection Performance Cam & Crank Key KitEliminate the risk of engine damage by installing our high strength tool steel key ways in..
$86.28
MTP SFI approved flex plate for 01-16 Duramax.Midwest Truck Products: BIHDFP66DMX..
$139.00
High temp oil resistant drain hose, black or blue (color may vary).This is the correct diameter for the stock 89-02 Dodge 5.9L Cummins turbo drain..
$17.00
Includes 12" section of 7/8" silicone hose.
Part number: 6.7CUMMINSOILDRAINKITSuperseded Part number: 6.7CUMMINSOILDRAIN..
$65.00
The Pusher Max Driver-Side Charge Tube routes air from your factory turbocharger along a more streamlined path to the intercooler via our mandrel bent..
$239.99
Product Features:
Eliminate "cold flow hose leaks" by automatically adjusting diameter for hose compression set or expansion/ contraction o..
$13.35
We now offer the "BHAF" (BIG HONKIN AIR FILTER) for your 94-02 Dodge 5.9L Cummins Diesel truck.This solution is a low cost high-flow fil..
$55.90
DHD's heavy duty balancer installer is a must for customers installing aftermarket dampers. Unlike the OE balancer, most performance Duramax dampers a..
$325.00
Its always best practice to replace rusty, missing or damaged line retainers while servicing your LB7 injectors. These stainless DHD retainers are dir..
$69.00
DHD's LoPro high flow manifolds are the newest addition to our comprehensive manifold lineup. These manifolds offer increased and equal port flow in a..
$779.99
DHD's high flow manifold bundle increases exhaust air flow over 55% without any port modifications. Additional gains can be found in port matching and..
$795.00
DHD 700-012AFT LB7 Duramax High Pressure Fuel Line KitSkip the dealer prices and replace your damaged, rusty high pressure injector lines with thi..
$399.00
These full featured OEM fit up pipes are an excellent value! These are brand new and include all the high flow, high quality features your looking for..
$185.00
If your experiencing lopey, erratic idle rpm there's a good chance your FPR or the FPR jumper harness is at fault. This FPR service kit from DHD is a ..
$335.00
*NOT LEGAL FOR SALE OR USE IN CALIFORNIA. THE MANUFACTURE, SALE, OFFER FOR SALE, OR INSTALLATION OF THIS PRODUCT MAY ALSO BE ILLEGAL NATIONWIDE UNDER ..
$409.00
*NOT LEGAL FOR SALE OR USE IN CALIFORNIA. THE MANUFACTURE, SALE, OFFER FOR SALE, OR INSTALLATION OF THIS PRODUCT MAY ALSO BE ILLEGAL NATIONWIDE UNDER ..
$599.00
Kit includes Gaskets and Hardware!Extended Length Up Pipe SetHigh Flow Manifolds RequiredThis extended length high flow up pipe set allows&n..
$335.29
Kit includes Gaskets and Hardware!
Stainless Duramax Up Pipe Set
Best FIT! Best Value!
NO CORE These full featured OEM length up pipes..
$309.00
*NOT LEGAL FOR SALE OR USE IN CALIFORNIA. THE MANUFACTURE, SALE, OFFER FOR SALE, OR INSTALLATION OF THIS PRODUCT MAY ALSO BE ILLEGAL NATIONWIDE UNDER ..
$969.00
DHD Built Performance Allison Transmission Valve BodyDHD's Turbo Tony valve body is assembled in house with the best parts in the industry. DHD's 17 y..
$800.00
NEW Design, Steel DIN construction, Does not accept GM compartmental parts or OE switches. DHD 115-510 Dirty Alli-Locker 5-Speed Torque Converter..
$219.00
DHD's TORQ series studs provide the perfect blend of quality and value that all Motorsports enthusiast's seek. These studs are designed to provide mar..
$219.00
3" Driver Side Intercooler pipeFor 2004.5-2010 Duramax. Replace the Restrictive Factory Driver Side Inter cooler pipe and Factory Boots that ..
$305.55
Fits: 2001-2008 GM 6.6L DuramaxThe Dorman Lower Intercooler Boot for your 2001-2008 GM 6.6L Duramax is re-engineered from upgraded materials for i..
$93.29
DHD's stainless steel Duramax hot side pipe kit is the perfect upgrade for your weak and restrictive factory hot side pipe. Our pipe kit fits 2001-201..
$239.00
When you need an emergency engine shutdown system, then BD has the solution that is hard to PASs up. Some industries such as mining, oil refinery, for..
$996.95
The Pusher Max Driver-Side Charge Tube routes air from your factory turbocharger along a more streamlined path to the intercooler via our mandrel bent..
$239.99
Replace your soft and spongy OE boot with this high performance 5 ply silicone boot from DHD. This boot connects the turbocharger compressor housing t..
$25.99
It doesn't matter if you're towing up a mountain, running 9 seconds on the track or pulling your best sled distance ever - get the hose and clamp kit ..
$249.95
Fits: 2006-2010 GM 6.6L Duramax LBZ/LMMThe CSF 6002 OEM+ Replacement Intercooler is manufactured from the highest quality components to provide you wi..
$310.37
Fits: 2006-2010 GM 6.6L Duramax LBZ/LMMThe PPE Silicone Hose & Clamp Kit for your 2006-2010 GM 6.6L Duramax LBZ/LMM are constructed using Flurocar..
$157.49
Mishimoto is expanding their line of Duramax
performance parts! Fed up with high EGTs and an intercooler setup that isn't
keeping up with the demand..
$2,055.95
Mishimoto is expanding their line of Duramax performance
parts! Mishimoto has developed a cold-side intercooler pipe and boot kit for
the 2006-2010 ..
$435.95
Does your diesel have High EGTs, Excessive SMOKE, Increased Turbo Lag, and Less Power than it used to? Let’s talk about boost leaks.Your tru..
$185.00
DHD 036-0261569 Long 3"-60mm Reducer Boot BlackDHD's silicon reducer boot is the boot we supply in all of their hot-side intercooler and intake manifo..
$24.99
Banks boost tube is larger than the factory pipe and designed to work with the stock elbow and intercooler to improve airflow, and allow the turbochar..
$189.00
Eliminate the weak factory lower intercooler boot design on your 2001-2010 GM 6.6L Duramax with the HSP Hot Side Intercooler Pipe. HSP's des..
$199.99












































