2007.5-2010 GM 6.6L LMM Duramax Intercoolers, Piping, & Boots

Fits: 2001-2008 GM 6.6L DuramaxThe Dorman Lower Intercooler Boot for your 2001-2008 GM 6.6L Duramax is re-engineered from upgraded materials for increased, durability, Dormans intercooler Boot kit ensures long-lasting performance.  The textured, oil-resistant exterior prevents clamp slippage, r..

DHD's stainless steel Duramax hot side pipe kit is the perfect upgrade for your weak and restrictive factory hot side pipe. Our pipe kit fits 2001-2010 Duramax trucks and is designed to mimic the factory tube routing and placement. This direct fit design makes it so no engine accessories, wheel line..

Banks boost tube is larger than the factory pipe and designed to work with the stock elbow and intercooler to improve airflow, and allow the turbocharger to spool up faster.Banks cold side tube has 65% greater flow area than stock tube. Produced from high-quality aluminized steel, the tube is mandre..

The Pusher Max Driver-Side Charge Tube routes air from your factory turbocharger along a more streamlined path to the intercooler via our mandrel bent 3” tubing. Not only is the engine bay cleaned up by this more efficient routing, the 9% shorter flow path delivers an 86% increase in airflow over th..

Replace your soft and spongy OE boot with this high performance 5 ply silicone boot from DHD. This boot connects the turbocharger compressor housing to the factory hot side pipe. These are generally amongst the first boots to rupture on trucks building moderate boost. An excellent, easy to install, ..

Fits: 2006-2010 GM 6.6L Duramax LBZ/LMMThe CSF 6002 OEM+ Replacement Intercooler is manufactured from the highest quality components to provide you with the best aftermarket OE replacement intercooler available for your 2006-2010 GM 6.6L Duramax LBZ/LMM. CSF is an ISO certified cooling system manufa..

Fits: 2006-2010 GM 6.6L Duramax LBZ/LMMThe PPE Silicone Hose & Clamp Kit for your 2006-2010 GM 6.6L Duramax LBZ/LMM are constructed using Flurocarbon lined, silicon rubber that is strengthened with five plies of Nomex fibers. This design results in a hose that resists fuel, oil, UV, ozone, as we..

Mishimoto is expanding their line of Duramax performance parts! Fed up with high EGTs and an intercooler setup that isn't keeping up with the demands of your Duramax? The solution is finally here with the Mishimoto 2006-2010 Chevrolet/GMC 6.6L Duramax intercooler kit! This kit includes everythin..

Mishimoto is expanding their line of Duramax performance parts! Mishimoto has developed a cold-side intercooler pipe and boot kit for the 2006-2010 6.6L Duramax. The factory pipe and boot do not stand a chance against the heat and pressure of your high-powered Duramax; upgrade to the Mishimoto k..

Does your diesel have High EGTs, Excessive SMOKE, Increased Turbo Lag, and Less Power than it used to? Let’s talk about boost leaks. Your truck needs air! Not a little bit of air. Your diesel engine needs all the incoming air it can get. Increasing air in the combustion process will help ma..

DHD 036-0261569 Long 3"-60mm Reducer Boot BlackDHD's silicon reducer boot is the boot we supply in all of their hot-side intercooler and intake manifold kits. This boot is 5" in length and reduces to 60mm and makes a perfect fit for the turbocharger outlet on the GM Duramax diesels.DHD: 036-026..

DHD 036-0261282 3" Reinforced Charged Air Cooler Silicon Coupler BlackThis is DHD's most popular silicone boot! DHD's double hump 3" coupler provides maximum strength and flexibility! Each DHD boot is also wrapped with a steel support ring too handle extreme amounts of boost pressure.We use this boo..

3" Driver Side Intercooler pipe For 2004.5-2010 Duramax. Replace the Restrictive Factory Driver Side Inter cooler pipe and Factory Boots that are Prone to ripping. Includes: One piece 3” Driver side pipe Straight boot Connection at Inter cooler Powder Coat Included, color of choice (Candy..

PLEASE NOTE THAT THIS PRODUCT HAS A 2-4 WEEK LEAD TIME!Eliminate the weak factory lower intercooler boot design on your 2001-2010 GM 6.6L Duramax with the HSP Hot Side Intercooler Pipe. HSP's design allows for a straight connection to the intercooler which eliminates any issues with the silicone boo..

Increase flow in your 2006-2010 GM 6.6L Duramax LBZ/LMM with the PPE 115041000 High Flow Performance Intercooler. It has been shown that the factory intercooler causes a 2 to 3 psi pressure drop, so boost from even the largest turbocharger can be choked if the intercooler is inefficient. With PPEs H..

The aFe intercooler tube represents the next generation of Diesel performance products. This intercooler tube produced 16hp and 49lbs. x ft. of torque  on the dyno while outflowing the factory intercooler tube by 67%.  Not only will you get increased performance but you will also see lower EGT's..

Mishimoto has released a performance intercooler for the 2006-2010 Chevrolet/GMC 6.6L Duramax. High intake and exhaust gas temperatures can reduce performance and potentially cause engine damage. Protect your investment by upgrading to the Mishimoto 6.6L Duramax intercooler. This intercooler is prec..

Improve the power and efficiency of your Duramax with the Mishimoto hot-side intercooler pipe and boot kit. The factory hot-side pipe for the 2004.5-2010 Duramax features numerous restrictive bends and chokes the engine with 2.5” piping. The 3” diameter of the Mishimoto intercooler pipe provides a s..

It doesn't matter if you're towing up a mountain, running 9 seconds on the track or pulling your best sled distance ever - get the hose and clamp kit designed to withstand over 100 PSI of boost so you're not left stranded. Our Hose and Clamp Kits feature: 4-ply and 5-ply Blue Nomex silicone boot..

This brand new Bladerunner Intercooler represents the next generation of intercoolers.  The Bladerunner intercoolers utilize a 3.15"  bar and plate design that is 15% larger than the competitors and outflows OE style tube and fin core designs by 48%! This design results in quicker and more measu..

Mishimoto is proud to release a direct-fit silicone boot kit with DuraCore™ technology designed specifically for the 6.6L Chevrolet/GMC Duramax. Mishimoto DuraCore™ technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal sili..

The CSF Heavy-Duty Intercooler is manufactured to provide durability and performance on your 2006-2010 GM 6.6L LBZ/LMM Duramax. This heavy duty Intercooler is built using a bar and plate design with industry leading testing methods to maximize airflow and heat dissipation. These techniques allow CSF..

The Banks engineers carefully examined the stock Duramax intercooler, and then upgraded everything for superior results: Stock has one plastic end tank; Techni-Cooler provides two durable, all-aluminum end tanks, which will never melt or burst under high-boost conditions Large, streamlined end t..

When you need an emergency engine shutdown system, then BD has the solution that is hard to PASs up. Some industries such as mining, oil refinery, forestry, mobile welding, septic removal and refueling require some vehicles to have an emergency engine shutdown in place. The most effective method for..

LLY/LBZ/LMM Duramax Driver Side Intercooler Pipe Replacement. Get rid of the factory crimped and restrictive tubing with SD's massive 3" mandrel bent intercooler pipe for your Duramax Diesel. Quicker Turbo Spool. Simple bolt on installation that improves MPG's and HP. (*boots/clamps are available ..

The Pusher Max Passenger-Side Charge Tube is the ultimate solution to improving air delivery to your factory two-piece intake bridge. Unlike other options on the market the Pusher Max charge tube properly supports the intake bridge, preventing any separation and subsequent boost leaks.Our charge tub..