06-10 GM 6.6L Duramax Merchant Fuel Rail Pressure Sensor Wrench
$84.29
- Part Number: 10522
- Est. Ship Time: Usually Ships By Next Business Day
SSL SECURE
TRANSACTION
AUTHENTIC
PRODUCTS
GUARANTEED PREMIUM
QUALITY
A+ Rating
Unique design saves time.
Reduce the components that need to be removed to performe service of sensor.
Swinging handle for increase mobility.
Compact socket head to fit tight space
Removing and replacing the Duramax fuel rail pressure sensor switch is difficult when using standard wrenches and sockets. The sensor is mounted on the right fuel rail under the EGR Cooler. Using conventional wrenches and sockets, a tech needs to remove the EGR cooler and heat shield(s) to gain access to the sensor. This specially designed wrench allows access without removing the EGR cooler and heat shields.
Part number: 10522
This direct OE replacement jumper harness joins the fuel rail pressure sensor to the engine harness. These harnesses are subject to extreme heat and a..
$105.00
ATS BoostFooler Electronic Fuel Regulator
Fitment: 2001-2010 GM 6.6L Duramax
The BoostFooler Electronic Fuel Regulator will allow..
$74.99
Replace the water pump on your 2001 to 2005 Duramax Silverado or Sierra truck with this kit that includes all the gaskets and seals to do the job righ..
$158.04
NOTE: This upgrade kit MAY NOT BE COMPATIBLE with some aftermarket aluminum rear transfer case halves due to the inconsistent manufactu..
$114.53
Over time and miles the injectors become heavily coated with carbon between the tip and sleeve causing them to stick together. When using a factory to..
$134.96
Note:
May not work if you have a tune installed in the truck
Will not work with the medium duty trucks as there is a built in High Idle ..
$20.74
Use our improved lower valve cover bolt kit with a hex bolt instead of the allen head bolt that is sometimes hard to get a socket or wrench on. By usi..
$14.53
Replace your damaged or stripped out bolts with new replacements. Sold in packs of 11. Services one side.
Includes:
Upper Valve Cov..
$12.87
Water pumps are common wear items not only in Duramax trucks but in all vehicles. A failing pump can cause catastrophic damage if not taken care of ea..
$296.18
This is the rear output seal for NP261XHD and NP263XHD transfer cases with an integrated boot.
What is a Transfer Case "Pump Rub" Failu..
$39.67
The transfer case on your Duramax truck transfers power from the transmission to the front and rear axles by the use of driveshafts. When a transfer c..
$2,470.52
The Merchant Automotive Deluxe Seal kit for the NP263XHD includes all the seals used throughout the transfer case to complete the proper reassembly af..
$66.98
Replace a 263XHD electronic shift four-wheel drive transfer case found in 2001 to 2007 GM Duramax 6.6L V8 diesel trucks ..
$2,470.52
The Merchant Automotive Deluxe Bearing and Seal kit for the NP263XHD includes all the bearings and seals throughout the transfer case as well as low r..
$208.15
The Merchant Automotive 263XHD Snap Ring Kit includes all ten snap rings required when replacing the snap rings inside the 263XHD transfer case during..
$55.23
Duramax Diesel Transfer Case Upgrade Kit
To repair or prevent pump rub failure on your Duramax diesel engine transfer case, use this..
$106.29
Whether you are finishing off your Allison transmission rebuild or having to replace your factory rear adapter housing, this direct replacement adapte..
$974.88
DmaxStore Billet Fuel Cap
Fits 2001-2025 Chevrolet / GMC 2500HD / 3500HD
Part# DMAX-BFC-6.6
This fuel cap was designed specificall..
$79.99
DHD's heavy duty balancer installer is a must for customers installing aftermarket dampers. Unlike the OE balancer, most performance Duramax dampers a..
$325.00
DMAX XD Platinum Xtreme Motor Mounts
Fits 2001-2010 Chevy/GMC 2500/3500 HD
Part# XD-MM-0110
The Xtreme torque produced by the Duramax diese..
$385.61
These high performance motor mounts are the original! Since 2013, DHD engine mounts have set the standard for upgraded Duramax engine mounts. Our desi..
$388.24
Fits: 2001-2016 6.6L Duramax LB7/LLY/LBZ/LMM/LML
Press fit front seal to engine block & crankshaft for proper fitment of inner & outer..
$128.05
Fits: 2001-2016 GM 6.6L Duramax LB7/LLY/LBZ/LMM/LMLThe CTA Tools Duramax Rear Crankshaft Seal Installer Tool Makes installing a new rear cranksha..
$168.35
The Lisle 72400 Exhaust Manifold Bolt Drill Template (GM 6.6L Duramax) removes broken exhaust manifold bolts on your 6.6L Duramax without damaging the..
$164.26
Front and Rear Engine Crankshaft Seal Installers
Includes:
Main Crank Seal Driver, Front, Duramax #10328
Main Crank Seal Driver, Rear, Du..
$310.51
Many service jobs on the Duramax require removal of the fan clutch. Without the right tool, removal can be difficult and damage to the nut can occur. ..
$62.76
A very handy tool. Hold the flywheel in place without removing the starter!
Part number: 22110..
$16.14
Merchant Automotive Front Main Crank Seal Driver
Part number: 10328..
$142.02
Glow Plug removal can seem straight forward but if the incorrect tools are used, the chances of breaking off the glow plug or damaging the cylinder he..
$95.21
Merchant Automotive Rear Main Crank Seal Driver
Part number: 10330..
$142.02
The XDP Duramax CAT Filter Adapter Wrench XD325 is the perfect addition to the XDP Duramax CAT Filter Adapter Kit XD171. Installation of the XD171 req..
$18.95
Fits: 2001-2016 GM 6.6L Duramax (For Use With XDP Duramax Crankshaft Pin Kit XD331)The XDP Life-Long Cobalt Steel Drill Bit is a replacement drill bit..
$9.95
