2004.5-2006 LLY Duramax Exhaust Systems

Keep your 2001-2007 GM 6.6L Duramax as quiet as it came from the factory with the AP Exhaust 2548 Challenge Series Replacement Muffler. This muffler features a patented Single Cartridge Muffler design along with a 100% aluminized steel construction for minimal back-pressure and maximum sound control..

The AP Exhaust 38960 Replacement Intermediate Pipe is a quality 100% aluminized replacement exhaust pipe for your 2001-2007 GM 6.6L Duramax (133" Wheelbase) truck. AP Exhaust makes sure all brackets, flanges, and shielding are in their original locations.Note: The OE exhaust system was a welded asse..

Backordered with No ETA   **Updated on 03/22/2023**If you're looking for a quality replacement intermediate pipe with OE fit for your 2001-2007 GM 6.6L Duramax (143.5" Wheelbase), turn to the AP Exhaust 48681 Replacement Intermediate Pipe. AP Exhaust makes sure all brackets, flanges, and ..

Get excellent corrosion resistance and an OE fit for the exhaust on your 2001-2007 GM 6.6L Duramax (153" Wheelbase) with the AP Exhaust 48682 Replacement Intermediate Pipe. AP Exhaust constructs their pipes from 100% aluminized steel and make sure all brackets, flanges, and shielding are in their or..

When it comes time to replace the intermediate pipe on your 2001-2007 GM 6.6L Duramax (157.5" Wheelbase), use high-quality components like the AP Exhaust 48668 Replacement Intermediate Pipe. AP Exhaust constructs their pipes from 100% aluminized steel and make sure all brackets, flanges, and shieldi..

The AP Exhaust 64824 Replacement Tail pipe is modeled after the stock pipe on your 2001-2007 GM 6.6L Duramax, featuring the necessary brackets, flanges, and shielding for an OE fit and appearance. AP Exhaust uses 100% aluminized heavy 14 and 16-gauge steel piping to construct their tail pipes, then ..

Fits: 2001-2016 Gm 6.6L Duramax LB7/LLY/LBZ/LMM/LMLThe AFE Bladerunner Exhaust Manifolds feature a bolt-on design and will increase power, performance, and exhaust flow in your 01-16 GM Duramax. Machined port: These manifolds have both the inlet and the outlet ports machined to matched the..

Max-Flow Down Pipe Support BracketFits 2001-2016 Chevrolet/GMC Silverado/Sierra 6.6L Duramax*See Fitment Notes Below*Part# MAX-DPB-STOCKIt is very common for the OEM bracket to crack and fail on the original up pipes, now we offer an upgraded replacement that is fabricated from 3/16" 304 stainless s..

If you have original GM Manifolds and PPE Up-Pipes, this bracket (stay) secures your PPE Down-Pipe and prevents movement. An unsecured Down-Pipe that moves can come in contact and damage the Up-Pipe bellow even under normal driving conditions. This movement can also contribute to metal fatigue and c..

PPE’s Manifold and Up-Pipes are designed to maximize power and flow characteristics. The Up-Pipe bellows are high-flow, internally sleeved, and aircraft-grade 304 stainless steel with an increased inner diameter.The entire Manifold and Up-Pipe exhaust system are designed to lower exhaust gas tempera..

50 States Emissions Legal (E.O. D-701-34)PPE High-Flow Manifolds are made from cast, high-sil moly. The PPE Up-Pipe bellows are internally-sleeved, made from aircraft-grade 304 stainless steel, and designed with increased inner diameter for higher flow. The entire Manifold and Up-Pipe exhaust system..

The aFe ATLAS turbo down-pipe is engineered to outflow and outperform the restrictive, OE down-pipe on your 2004-2010 Chevy Silverado or GMC Sierra 2500HD/3500HD with the Duramax V8 6.6L turbo diesel. The 3" mandrel-bent steel tubing offers smoother transition bends for increased airflow, delivering..

This MBRP downpipe eliminates restriction compared to the factory downpipe. This downpipe is made of mandrel bent aluminized steel construction which provides a smoother flow from the turbo which results in lower EGT's, increased performance, throatier sound and faster turbo spool-up. Downpipe ..

PPE has taken OEM replacement to a new level. All PPE OEM Up-Pipes allow 53% greater flow than stock. PPE OEM Up-Pipes are a direct bolt-on to your factory manifolds. Unlike factory parts, PPE OEM Up-Pipe are manufactured from 11-gauge 304 stainless steel and includes our superior PPE 304 stainless ..

PPE has taken OEM replacement to a new level. All PPE OEM Up-Pipes allow 53% greater flow than stock. PPE OEM Up-Pipes are a direct bolt-on to your factory manifolds. Unlike factory parts, PPE OEM Up-Pipe are manufactured from 11-gauge 304 stainless steel and includes our superior PPE 304 stainless ..

DHD's high flow manifold bundle increases exhaust air flow over 55% without any port modifications. Additional gains can be found in port matching and port blending. Our manifolds are cast from the same high Silca Iron that's become standard in the high flow manifold market. Included in the high flo..

01-07 Chevy/GM 6.6L Duramax Diesel Stock Muffler Delete Pipe Does not fit 08+ LMM Duramax equipped trucks.Quickly and easily straight-pipe your Chevy Duramax to allow your engine to breathe!Simply cut the exhaust as close to your muffler as possible on both sides of the stock muffler, then install t..

The aFe Universal fit 409 Stainless Steel Performance Muffler is designed to provide a deep, throaty, powerful sound on acceleration but maintain a smooth sound at idle. This muffler is constructed of brushed finished 409 stainless steel and uses a straight through perforated core with heat resistan..

Diamond Eye Aluminized 5" Tailpipe. This is the piece that exits from the vehicle. If you need the 1st tailpipe piece, see below. Fits 2001 - 2007 GM 6.6L Duramax Diesel Diamond Eye part number: 341007IMPORTANT NOTE: Due to varying laws and regulations, most Diamond Eye exhaust systems & component..

RThe PPE 117000500 3" Stainless Steel Downpipe for your 2004.5-2010 GM 6.6L Duramax allows you to removed your crushed oval stock downpipe and replace it with a smooth round, long lasting 304 stainless steel down pipe. Spiral wrapped with titanium woven thread for superior heat that's held in place ..

3" Down Pipe Chevy/ GMC 2004.5-2010 (LLY/ LBZ/ LMM) While the search for more power for your LLY, LBZ or LMM Duramax powered vehicle usually leads you down the path of exhaust, intake and tuner, one item that is often overlooked is the factory restrictive turbo direct pipe. MBRP has addressed this ..

Muffler Delete Pipe 4" Inlet /Outlet 30" OverallUniversal There are always those purists who push the envelope in their pursuit of maximum performance. It is for these true enthusiasts that we build what is one of the most extensive line-ups of muffler deletes in the industry. Extreme performance an..

Diamond Eye Aluminized 5" Tailpipe. This is the piece that connects to the last tailpipe piece. If you need the 2nd tailpipe piece (exiting piece), see below. Fits 2001 - 2007 GM 6.6L Duramax Diesel Diamond Eye part number: 341006IMPORTANT NOTE: Due to varying laws and regulations, most Diamond Ey..

The Grand Rock V-Band Clamp VB-384G is a replacement for the factory clamp your 2001-2015 GM 6.6L Duramax. This clamp joins the bottom of your downpipe, to the front-pipe in your exhaust system. The factory clamp is exposed to extreme conditions from constant heat cycles, and being exposed to t..

2 13/16" - Length 7/8" - Height 5/16" - Hanger Holes 1 1/2" - Spacing between holes Part number: 16219 (16219-1, 16219-10, BR560-001)..

Stainless Steel 4 Inch Front Pipe with Flange for 2001-2004 Chevy/GM 6.6L Duramax DieselMBRP: GMS9401..

BD “Full Bore” 01-07 Chevy/GM Duramax LB7,LLY, & LBZ Exhaust Manifold Improve exhaust flow, reduce exhaust gas temperature (EGT) and realize greater power gains with the new “Full Bore” driver’s side exhaust manifold for the ’01-’07 GM Duramax.You may not know it, but the factory driver’s side mani..

361045 - FOR 2001, 2002, 2003, 2004, 2005, 2006 & EARLY 2007 - CHEVY/GMC 6.6L DURAMAX DIESEL 2500/3500 - 4" T409 STEEL - PERFORMANCE DIESEL EXHAUST - 4 BOLT ADAPTER PLATE This adapter plate has a 4-bolt welded flange on one side and a 4 inch diameter slip-fit connection on the opposite side. It is ..

04.5-07 DURAMAX TURBO DIRECT For 2004, this is a mid year motor change.FITS 2004-1/2 to 2010BOTH ENDS OF PIPE ARE ROUND Pypes part #DTD4507..

Replacement section for second section of tailpipe only on 01-07 6.6L Duramax. The first section is part # 321051 Image for Representation only, may not be actual part. IMPORTANT NOTE: Due to varying laws and regulations, most Diamond Eye exhaust systems & components cannot ship to California. Ta..

Aluminized Steel 4 Inch Front Pipe with Flange for 2001-2004 Chevy/GM 6.6L Duramax DieselTHIS PRODUCT CANNOT SHIP TO CALIFORNIA MBRP: GMAL401..

Diamond Eye Performance has developed a Turbo Direct pipe for the ’04- '010 Chevy/GM LLY, LBZ, & LMM Diesel Exhaust systems.   It features CNC machined end-forms for precise fit, mandrel bent tubing for smoother flow from the turbo and is covered with special thermal resistant wrapping to help reduc..

2004.5-2010, 6.6L, 2500/3500, 3" Turbo Direct Pipe. Competition Exhaust PipesSimple bolt on installation for competition use Built using heavy duty steel in 3” diameter Utilizes OE style connections to ensure a proper fitment Flo Pro part number:  10100..

4001 - FOR 2001, 2002, 2003, 2004, 2005, 2006 & EARLY 2007 - CHEVY/GMC 6.6L DURAMAX DIESEL 2500/3500 - PERFORMANCE DIESEL EXHAUST - HIGH-TEMPERATURE 4 BOLT GASKET - USED FOR 321045 OR 361045IMPORTANT NOTE: Due to varying laws and regulations, most Diamond Eye exhaust systems & components cannot ship..

Replacement section for first section of tailpipe only on 01-07 6.6L Duramax. The Second section is part # 321052 Image for Representation only, may not be actual part. IMPORTANT NOTE: Due to varying laws and regulations, most Diamond Eye exhaust systems & components cannot ship to California. Ta..

This is the pipe that is between the downpipe and muffler. 4" Aluminized Diamond Eye part number: 321046IMPORTANT NOTE: Due to varying laws and regulations, most Diamond Eye exhaust systems & components cannot ship to California. Take a look at our product selection for alternatives from other..

   **This Kit Does Not Include Muffler** Features: *Increased Fuel Economy *Lower EGTs *Mandrel Bent Tubing for Maximum Flow *Direct Fit *Increased Horsepower and Torque *Agressive Sound *Better Throttle Response *Easy Bolt-On Kits *Utilizes OEM Hangers *1-Year Limited Warranty on Aluminized kits..

MBRP Stainless Muffler Delete Pipe for all MBRP Ford & GM single exhaust systemsMDS930 Clamps Sold Separately DOES NOT WORK ON STOCK EXHAUSTS. FOR MBRP SYSTEMS ONLY. MBRP: MDS930..

Replacement section for second section of tailpipe only on 01-07 6.6L Duramax. The first section is part # 361051 Image for Representation only, may not be actual part. IMPORTANT NOTE: Due to varying laws and regulations, most Diamond Eye exhaust systems & components cannot ship to California. Ta..

321045 - FOR 2001, 2002, 2003, 2004, 2005, 2006 & EARLY 2007 - CHEVY/GMC 6.6L DURAMAX DIESEL 2500/3500 - 4" ALUMINIZED - PERFORMANCE DIESEL EXHAUST - 4 BOLT ADAPTER PLATE This adapter plate has a 4-bolt welded flange on one side and a 4 inch diameter slip-fit connection on the opposite side. It is ..

Replacement section for first section of tailpipe only on 01-07 6.6L Duramax. The Second section is part # 361052 Image for Representation only, may not be actual part. IMPORTANT NOTE: Due to varying laws and regulations, most Diamond Eye exhaust systems & components cannot ship to California. Ta..

Lead Time of 3-5 Business Days!Includes:3" Stainless Steel Downpipe Heat Wrap & Clamps High Temp CoatingWCFAB part number: WCF100703.Click here for Wehrli powder coat samples Wehrli Custom Powder Coating is housed under the same roof as Wehrli Custom Fabrication. This has Enabled..

Features: *Increased Fuel Economy *Lower EGTs *Mandrel Bent Tubing for Maximum Flow *Direct Fit *Increased Horsepower and Torque *Agressive Sound *Better Throttle Response *Easy Bolt-On Kits *Utilizes OEM Hangers *1-Year Limited Warranty on Aluminized kits *6-Year Limited Warranty on Stainless Stee..

Replace, worn, rusted or broken up pipe hardware with DHD's large flange up pipe bolts. Our phosphate oil coated 10.9 bolts meet or exceed all OEM specs. Their extra large flange guarantees a perfect clamp load and seal every time.   Pair these bolts with our PPE stainless gaskets for a leak free,..

MBRP 2001-2005 6.6L Duramax Aluminized 4" Exhaust System, Cat/4 Bolt flange Back Aluminized Installer Series, four-bolt flange back. Includes 4 Inch Inlet, 5 Inch Outlet Polished Stainless tip! The Duramax has a refined toughness to it. MBRP Inc. Has left the refined part to General Motors, and ad..

The smooth curves and increased size of This aFe cat-back exhaust systems helps remove restriction and keeps exhaust gasses flowing smoothly. Durable aluminized steel. Systems Specifications:4 inch aluminized steel mandrel-bent tube 7 inch aluminized steel muffler Tip not included Cat-Back ..

  **This Kit Does Not Include Muffler**Features: *Increased Fuel Economy *Lower EGTs *Mandrel Bent Tubing for Maximum Flow *Direct Fit *Increased Horsepower and Torque *Agressive Sound *Better Throttle Response *Easy Bolt-On Kits *Utilizes OEM Hangers *1-Year Limited Warranty on Aluminized..