-750x750.png)
-10 %
Position 1 Performance 04.5-10 GM 6.6L Duramax P1P PCV Re-route Kit
- Part Number: P10410PCVRK
- Est. Ship Time: Usually Ships By Next Business Day

SSL SECURE
TRANSACTION

AUTHENTIC
PRODUCTS

GUARANTEED PREMIUM
QUALITY

A+ Rating
This offer ends in:
Day
Hour
Min
Sec
More from this brand
Starting From $856.30 $951.44
Starting From $1,494.60 $1,660.65
Starting From $1,345.20 $1,494.64
Starting From $1,419.90 $1,577.65
PCV Cap is machined out of a single piece of aluminum stock and has a pre-installed o-ring for a 100% seal-tight fitment. Get rid of that nasty, black, oily soot that is all over your engine bay for good with this kit!
Included in the kit:
8' Low pressure hydraulic hose
Billet PCV Cap
Assembly hardware
*Competition and offroad use only
Superseded Part Number: PE-69-PCV-RRKIT
This item cannot be shipped to California.

LLY/LBZ/LMM 3.5" Intake Horn for VGT Turbo.
Does not have PCV provisions or resonator box provisions.
Includes:
3-1/2" Intake Ho..
$377.33
The all new redesigned intake kit for the 2006-2007 Duramax 6.6L takes advantage of our latest silicone seals and air filter designs. With improved ai..
$349.00
3" Down Pipe Chevy/ GMC 2004.5-2010 (LLY/ LBZ/ LMM) While the search for more power for your LLY, LBZ or LMM Duramax powered vehicle usually leads yo..
$194.99
This item was replaced with a new system and the year range fitment changed. Click here to view the S60210SLM exhaust.
2001-2007 Chevy/GMC Dur..
$846.75
2004.5-2010, 6.6L, 2500/3500, 3" Turbo Direct Pipe.
Competition Exhaust Pipes
Simple bolt on installation for competition use
Built using heavy..
$182.15
Turbo Drain Line LLY/LBZ/LMM
Part Number: 97303638..
$81.45 $90.48
DHD 030-5001 Billet Rear Engine Cover Coolant Block Off Plate
DHD's Billet Coolant Passage Block Plate is used to stop the problematic Duramax cool..
$60.95
Everything you need to service 1 Duramax up pipe. Works on both passenger or driver side up pipes. Unlike our competitors, these bolts are dimensional..
$24.99
Backordered with no ETA (Updated 4/25/25)
DHD's TORQ series studs provide the perfect blend of quality and value that all Motorsports enthusiast's ..
$449.00
Backordered with no ETA (Updated 5/2/25)
DHD's high flow manifold bundle increases exhaust air flow over 55% without any port modifications. Additi..
$795.00
RThe PPE 117000500 3" Stainless Steel Downpipe for your 2004.5-2010 GM 6.6L Duramax allows you to removed your crushed oval stock downpipe and replace..
$134.99
Included in the Base kit:
OEM Grade C Right and Left Head Gaskets
36 New OEM Replacement Head Bolts
Upper valve cover gaskets (now included ..
$793.48
The XDP Billet Turbo Resonator Delete Plug XD184 for your 2004.5-2010 GM 6.6L Duramax allows you to clean up the under-hood of your truck by removing ..
$22.95
The stock LLY turbo inlet is very restrictive, causing the turbo to over work and EGT's to go up. This causes dreaded thermal runaway.
Th..
$195.00
The heart of any modern power steering system is the pump.PSC offers a full range of new power steering pumps, covering most applications from America..
$275.00
The Merchant Automotive 10092 Torque Converter Bolt Kit are a high-quality replacement for the stripped or snapped converter bolts in your 2001-2016 G..
$19.08
Billet 6 blade 64mm inducer compressor wheel 62mm 10 Blade turbine Rated at 500+hp with adequate supporting mods 100% new t..
$856.30 $951.44
Billet 6 blade 64mm inducer compressor wheel 68mm 10 Blade turbine Rated at 600+hp with adequate supporting mods 100% new t..
$1,494.60 $1,660.65
Billet 6 blade 64mm inducer compressor wheel 62mm 10 Blade turbine Rated at 500+hp with adequate supporting mods 100% new t..
$1,345.20 $1,494.64
Billet 6 blade 64mm inducer compressor wheel 64mm 10 Blade turbine Rated at 600+hp with adequate supporting mods 100% new t..
$1,419.90 $1,577.65
Position 1 Performance Lift Pump kit with Kennedy Diesel pump.
These compact little pumps are just what is needed to keep a steady supply of low pr..
$361.85 $402.05
Billet 6 blade 60mm inducer compressor wheel
64mm exducer 10 Blade turbine
Rated at 500+ HP with adequate supporting mods ..
$1,008.40 $1,120.46
63.5mm 2.5 work stock legal
4 blade boreless point ball milled compressor wheel
Dual ball bearing center
..
$2,932.05 $3,257.81
100% new turbo
No core
Gasket kit included
1 year unlimited mile warranty (cover defects in parts and workmanship)
&n..
$652.80 $725.33
Billet 6 blade 64mm inducer compressor wheel
67mm exducer 10 Blade turbine
Rated at 650+ HP with adequate supporting mods ..
$1,091.85 $1,213.19
Billet 6 blade 60mm inducer compressor wheel
60mm exducer 10 Blade turbine
Rated at 500+ HP with adequate supporting mods ..
$980.60 $1,089.55
Billet 4 blade point ball milled compressor wheel
63.5 2.5 work stock legal
Ultra slim compressor hub
72mm 10 Blade turbine
15mm ..
$2,644.10 $2,937.91
Billet 6 blade 64mm inducer compressor wheel 68mm 10 Blade turbine Rated at 500+hp with adequate supporting mods 15mm high ..
$1,298.20 $1,442.42
Billet 6 blade 66mm inducer compressor wheel 68mm 10 Blade turbine Rated at 500+hp with adequate supporting mods 15mm high ..
$1,337.60 $1,486.22
Billet 6 blade 68mm inducer compressor wheel 68mm 10 Blade turbine Rated at 550+hp with adequate supporting mods 15mm high ..
$1,400.20 $1,555.76
Billet 6 blade 68mm inducer compressor wheel 72mm 10 Blade turbine Rated at 650+hp with adequate supporting mods 15mm high ..
$1,455.80 $1,617.58
Passes the test. Again and again.Others build and ship without testing. Not Banks. Our Ram-Air Intakes start out as CAD software prototypes and are pu..
$449.00
Fits: 2004.5-2005 GM 6.6L LLY DuramaxThis Banks Power 42135-D Ram Air Intake System with Dry Filter for your 2004.5-2005 GM 6.6L LLY Duramax comes wit..
$449.00
Outflow the factory air intake system in your 2004.5-2005 GM 6.6L Duramax LLY with the S&B Filters 75-5102/75-5102D Cold Air Intake Kit with Cleanable..
$349.00
WCFab 4” Intake kits are designed to work with the factory turbocharger or upgraded “drop-in” style turbochargers. Using a high flow..
$509.25
WCFab 4” Stage 2 Intake kits are designed to work with the factory turbocharger or upgraded “drop-in” style turbochargers. Using a h..
$775.03
Increase airflow while adding custom styling under the hood of your 2004.5-2005 GM 6.6L Duramax LLY with the HSP LLY Cold Air Intake. This 4" man..
Starting From $403.75
NOTE: Fits all 2004 LLY 6.6L Duramax Diesels and all 2005 LLY Duramax Diesels with the Panel Style Stock Air Filter. If your 2005 Duramax has the ROUN..
$349.99
Bringing you the next generation of intakes, the Momentum HD sealed air intake system is designed using the most up-to-date engineering tools and tech..
$420.00
Fits: 2004.5-2005 GM 6.6L Duramax LLYThis Volant 15966 Air Intake System is the perfect component for filtration and performance in your 2004.5-2005 G..
$335.90
Fits: 2004.5-2005 G 6.6L Duramax LLYThis Volant 15966 Air Intake System is the perfect component for your 2004.5-2005 GM 6.6L Duramax LLY Truck. This ..
$335.90
Fits: 2004.5-2005 GM 6.6L LLY Duramax
Includes:
4" Fabricated Intake With Sensor Bung(screws for sensor included also)
Air Filter
P..
$330.00
The Volant 35060 Air Scoop for your 01-05 GM 6.6L Duramax is designed to offer a ram-air style inlet for your Volant Intake System. This Scoop mounts ..
$178.90
Passes the test. Again and again.Others build and ship without testing. Not Banks. Our Ram-Air Intakes start out as CAD software prototypes and are pu..
$119.00
The 081-HSP Or as we like to call it the HSP Cold Air Intake Bundle for the 2004.5-2007 Duramax Equipped Chevrolet and GMC Trucks is a great..
Starting From $622.25
The HSP VGT Intake Mouthpiece for the 2004.5-2010 Chevrolet and GMC trucks or 003-HSP really helps with that problem and looks good while it’s doing i..
Starting From $251.75