2004.5-2005 GM 6.6L LLY Duramax Intercooler Boots & Piping

PRODUCT FEATURESDirect fit for 2001-2005 Chevrolet/GMC 6.6L DuramaxAll-aluminum cast end tanksBar-and-plate core designReduces turbo stress and extends lifeAvailable in Sleek Silver and Stealth BlackProvides improved airflow and lowers intake air temperaturesMishimoto Lifetime WarrantyDESCRIPTIONMis..

CSF OEM+ replacement is an upgrade from the factory intercooler. Built with cast aluminum end tanks, increases reliability, durability and burst pressure capabilities. Drop-in installationWorks with existing hardwarePart number: 6007..

Fits: 2001-2008 GM 6.6L DuramaxThe Dorman Lower Intercooler Boot for your 2001-2008 GM 6.6L Duramax is re-engineered from upgraded materials for increased, durability, Dormans intercooler Boot kit ensures long-lasting performance.  The textured, oil-resistant exterior prevents clamp slippage, r..

DHD's stainless steel Duramax hot side pipe kit is the perfect upgrade for your weak and restrictive factory hot side pipe. Our pipe kit fits 2001-2010 Duramax trucks and is designed to mimic the factory tube routing and placement. This direct fit design makes it so no engine accessories, wheel line..

The HSP LLY Cold Side Intercooler Pipe to Factory Bridge is a bolt on upgrade over the factory intercooler pipe in your 2004.5-2005 GM 6.6L Duramax LLY. This 3" mandrel bent pipe can flow 53% more air than the factory unit and responds well when paired with turbo and fuel upgrades. Included is a 2.2..

PLEASE NOTE THAT THIS PRODUCT HAS A 2-4 WEEK LEAD TIME!Match the intercooler pipe to the HSP Max Flow Bridge in your 2004.5-2005 GM 6.6L Duramax LLY with the HSP LLY Cold Side Intercooler Pipe for the HSP Bridge. The HSP Intercooler tube is built from 3" mandrel tubing. Designed to increase horsepow..

Banks boost tube is larger than the factory pipe and designed to work with the stock elbow and intercooler to improve airflow, and allow the turbocharger to spool up faster.Banks cold side tube has 65% greater flow area than stock tube. Produced from high-quality aluminized steel, the tube is mandre..

The Pusher Max Driver-Side Charge Tube routes air from your factory turbocharger along a more streamlined path to the intercooler via our mandrel bent 3” tubing. Not only is the engine bay cleaned up by this more efficient routing, the 9% shorter flow path delivers an 86% increase in airflow over th..

Replace your soft and spongy OE boot with this high performance 5 ply silicone boot from DHD. This boot connects the turbocharger compressor housing to the factory hot side pipe. These are generally amongst the first boots to rupture on trucks building moderate boost. An excellent, easy to install, ..

Does your diesel have High EGTs, Excessive SMOKE, Increased Turbo Lag, and Less Power than it used to? Let’s talk about boost leaks. Your truck needs air! Not a little bit of air. Your diesel engine needs all the incoming air it can get. Increasing air in the combustion process will help ma..

DHD 036-0261569 Long 3"-60mm Reducer Boot BlackDHD's silicon reducer boot is the boot we supply in all of their hot-side intercooler and intake manifold kits. This boot is 5" in length and reduces to 60mm and makes a perfect fit for the turbocharger outlet on the GM Duramax diesels.DHD: 036-026..

DHD 036-0261282 3" Reinforced Charged Air Cooler Silicon Coupler BlackThis is DHD's most popular silicone boot! DHD's double hump 3" coupler provides maximum strength and flexibility! Each DHD boot is also wrapped with a steel support ring too handle extreme amounts of boost pressure.We use this boo..

Application Notes: This product will not work with the factory intercooler plumbing and is designed to be used in custom applications where the end user will be fabricating their own charge pipe. FEATURES-The Pusher SuperMax Y-Bridge is a one piece Patent Pending design that properly guides air..

6-8 Week Lead Time!!!!Get the most out of your 2004.5-2005 GM 6.6L Duramax LLY with the HSP LLY Max Flow Bridge. Built to mate to your factory cold side intercooler pipe, HSP's 3" Max Flow Bridge features a precision cast CNC machined bridge section so you can get the best flow, fit, and performance..

PLEASE NOTE THAT THIS PRODUCT HAS A 2-4 WEEK LEAD TIME!Eliminate the weak factory lower intercooler boot design on your 2001-2010 GM 6.6L Duramax with the HSP Hot Side Intercooler Pipe. HSP's design allows for a straight connection to the intercooler which eliminates any issues with the silicone boo..

The Pusher SuperMax Y-bridge is the first true “Y” bridge introduced to the performance diesel truck market, and remains the pinnacle in air delivery to the factory Duramax intake plenums. This system combines the SuperMax Y-bridge with a full 3” charge tube, maximizing air delivery from the interco..

Increase flow in your 2006-2010 GM 6.6L Duramax LBZ/LMM with the PPE 115041000 High Flow Performance Intercooler. It has been shown that the factory intercooler causes a 2 to 3 psi pressure drop, so boost from even the largest turbocharger can be choked if the intercooler is inefficient. With PPEs H..

The aFe intercooler tube represents the next generation of Diesel performance products. This intercooler tube produced 16hp and 49lbs. x ft. of torque  on the dyno while outflowing the factory intercooler tube by 67%.  Not only will you get increased performance but you will also see lower EGT's..

Mishimoto has released a performance intercooler for the 2001-2005 Chevrolet/GMC 6.6L Duramax. A high-performance diesel engine requires a cool, dense charge of air to reach its full power potential. Upgrade your factory intercooler to the Mishimoto all-aluminum intercooler engineered to maximize th..

Improve the power and efficiency of your Duramax with the Mishimoto hot-side intercooler pipe and boot kit. The factory hot-side pipe for the 2004.5-2010 Duramax features numerous restrictive bends and chokes the engine with 2.5” piping. The 3” diameter of the Mishimoto intercooler pipe provides a s..

Move over, pipsqueak. The stock intercooler has an inferiority complex. No wonder—it’s smaller than Techni-Cooler in every aspect: boost tubes … core area … inlet/outlet … even the end tanks. And most competitors use poorly designed sheet metal end tanks and provide inadequate flow volume. Banks cr..

The Pusher Max Passenger-Side Charge Tube is the ultimate solution to improving air delivery to your factory two-piece intake bridge. Unlike other options on the market the Pusher Max charge tube properly supports the intake bridge, preventing any separation and subsequent boost leaks.Our charge tub..

The CSF Heavy-Duty Intercooler is manufactured to provide durability and performance on your 2001-2005 GM 6.6L LB7/LLY Duramax. This heavy duty Intercooler is built using a bar and plate design with industry leading testing methods to maximize airflow and heat dissipation. These techniques allow CSF..

It doesn't matter if you're towing up a mountain, running 9 seconds on the track or pulling your best sled distance ever - get the hose and clamp kit designed to withstand over 100 PSI of boost so you're not left stranded. Our Hose and Clamp Kits feature: 4-ply and 5-ply Blue Nomex silicone boot..

The aFe intercooler tube represents the next generation of Diesel performance products. This intercooler tube outflows the factory intercooler tube by 40%.  Not only will you get increased performance but you will also see lower EGT's and increased MPG.  This 3" diameter powdercoated stainless s..

When you need an emergency engine shutdown system, then BD has the solution that is hard to PASs up. Some industries such as mining, oil refinery, forestry, mobile welding, septic removal and refueling require some vehicles to have an emergency engine shutdown in place. The most effective method for..

LLY/LBZ/LMM Duramax Driver Side Intercooler Pipe Replacement. Get rid of the factory crimped and restrictive tubing with SD's massive 3" mandrel bent intercooler pipe for your Duramax Diesel. Quicker Turbo Spool. Simple bolt on installation that improves MPG's and HP. (*boots/clamps are available ..

A blown intercooler boot can mean the end to a weekend at the drag strip or a canceled day on the boat. You demand a lot from your truck, so you need reliable and dependable parts. Mishimoto is proud to release a direct-fit silicone boot kit with DuraCore™ technology designed specifically for the 6...