Menu
Your Cart

Air Intake Systems

Air Intake Systems for the 2006-2007 Chevy 6.6L LBZ Duramax Diesel.
The LBZ engine is found in the classic body style only.

High flow performance air intakes & filters allow your engine to breathe, resulting in better low-end power, faster turbo spool-up, lower egt's, and better fuel economy! 
Brand: Performance Engineering Part Number: PE-Dmax-PCV-Plug-04-10
The Performance Engineering Re-route plug provides a custom look under the hood of your 2004-2010 GM 6.6L Duramax. Featuring a billet aluminum construction made for an easy install and held securely in place by its built-in O-ringFeatures:Built in O-ring Seal CNC machined Billet Aluminum M..
$23.50 $23.50

Brand: Performance Engineering Part Number: PE-Dmax-Res-Plug-04-10
Replace the stock Turbo resonator with this gnarly billet delete plug to clean up your look under the hood! TipTo help with install, Start the engine and get to operating temp, Keep plug at room temp or colder. Do not use a heat gun. Billet Aluminum Made in the USA Pre-installed ..
$23.00 $23.00

Brand: Performance Engineering Part Number: PE-69-PCV-RRKIT
PCV Cap is machined out of a single piece of aluminum stock and has a pre-installed o-ring for a 100% seal-tight fitment. Get rid of that nasty, black, oily soot that is all over your engine bay for good with this kit! Included in the kit:Low pressure hydraulic hoseBillet PCV CapAssembly hardwa..
$115.00

Part Number: KF-1035D
Replacement Filter for S&B Cold Air Intake Kit (Disposable, Dry Media) S&B: KF-1035D..
$45.00

Brand: Wehrli Custom Fabrication Part Number: WCF100341
LLY/LBZ/LMM 3.5" Intake Horn for VGT Turbo. Does not have PCV provisions or resonator box provisions. Includes:3-1/2" Intake Horn O-Ring Powder CoatingWCFAB part number: WCF100341 NOTE: ONLY fits with a WCFab 3" y-bridge kit or WCFAB Basic Intercooler Pipe for Factory Y-Bridge.Wehrl..
$222.13 $222.13

Brand: Absolute Performance Part Number: ABSO-CCVFITTING
Went with an aftermarket kit and are tired of the oil drip and fumes? This fitting fixes all of that! Mounts your discharge line to your exhaust system, routing the vapors into the exhaust stream where they can burn off and not be noxious to you anymore. Fitting is designed to be welded or bolted on..
$0.00

Brand: Fleetguard Part Number: AF27860
Duramax Diesel Fleetguard Air FilterPart number: AF27860..
$40.11 $40.11

Brand: Wehrli Custom Fabrication Part Number: WCF100336
LBZ Duramax 4" Intake Kit for factory turbo. Includes:4" Intake Dry Air Filter Outerwear's Pre-Filter Cover Silicone Boot T-Bolt Clamps Powder CoatingWCFAB part number: WCF100336Click here for Wehrli powder coat samples Wehrli Custom Powder Coating is housed under the same roof as ..
$387.03 $387.03

Brand: S&B Filters Part Number: 75-5080-SB
The all new redesigned intake kit for the 2006-2007 Duramax 6.6L takes advantage of our latest silicone seals and air filter designs. With improved air flow by over 15% than previous model, the 75-5080 simply outperforms the stock intake and looks better too. S&B Cold Air Intakes increase cool airf..
$329.00

Brand: AFE Part Number: 21-90038
With two layers of progressively finer mesh synthetic media between 100% polyurethane top and base, this high flow, “oil-free” conical performance filter provides maximum convenience and easy maintenance with excellent airflow. Washable and reusable for multiple cleanings, the tall open evenly ..
$80.57 $80.57

Brand: Wehrli Custom Fabrication Part Number: WCF100714
High-Flow Intake Bundle Package for 2006-2007 LBZ Duramax. Save $60 By Buying through this Bundle! Includes:3" Fabricated Y-Bridge 3" Cold Side Intercooler 3" Hot Side Intercooler Pipe 4" Intake 3-1/2" Intake Horn Dry Air Filter Outerwear's Pre-Filter Cover 3" Stainless Turbo Downpipe S..
$1,677.13 $1,677.13

Brand: Deviant Race Parts Part Number: 76151
Deviant Race Parts High Flow Y-Bridge for 06-10 6.6L GM Duramax LBZ/LMMHaving trouble keeping your factory Y-Bridge from blowing out Replace it with this fabricated, high performance unit from Deviant Race Parts. Also compatible with factory EGR system.Features:20-30 hp dyno proven gainsTIG WeldedCN..
$650.00 $650.00

Brand: AFE Part Number: 46-20049
The aFe intercooler tube represents the next generation of Diesel performance products. This intercooler tube produced 16hp and 49lbs. x ft. of torque  on the dyno while outflowing the factory intercooler tube by 67%.  Not only will you get increased performance but you will also see lower EGT's..
$262.99 $262.99

Brand: K&N Filters Part Number: 57-3057
The 57 Series Generation II air intake, also referred to as an FIPK®, is K&N's ultimate performance product. These performance intakes are designed to increase power by as much as 10%. 57 Series FIPK's are CARB exempt, street legal in all 50 US states, come with a Million Mile Limited Warranty and a..
$297.99 $297.99

Brand: Wehrli Custom Fabrication Part Number: WCF100638
LBZ Stage 2 Intake Kit with turbo inlet horn for factory turbo. Includes:4" Intake 3-1/2" Intake Horn Dry Air Filter Outerwear's Pre-Filter Cover O-Ring Silicone Boot T-Bolt Clamps Powder CoatingWCFAB part number: WCF100638Click here for Wehrli powder coat samples Wehrli Custom P..
$542.23 $542.23

Brand: Banks Power Part Number: 42142
The Banks Ram-Air Intake System delivers exceptional airflow and air density. Its large cotton gauze air filter requires fewer cleanings than competitive filters (stock's small paper filter is not reusable). With its giant 7-1/8" outlet, streamlined components and enclosed cold-air box that keeps ho..
$429.00 $429.00

Brand: HSP Diesel Part Number: 302-HSP
The HSP LBZ Cold Air Intake adds a custom look under the hood of your 2006-2007 GM 6.6L Duramax LLY/LBZ while increasing performance! Featuring 4" mandrel bent pipe, HSP's intakes increase flow by removing restriction while also pulling in cold, fresh air from the headlight bezel and fender port. Th..
$357.00 $357.00

Brand: Pacific Performance Engineering Part Number: 115051000
Increase airflow in your 2006-2010 GM 6.6L Duramax with the PPE 115051000 High Flow Race Intake Manifold. High performance engines require sufficient airflow as well as fuel to be optimally efficient. PPEs High Flow Intake Manifold eliminates the restrictive air intake heater, and quickly channels e..
$674.99

Brand: G&R Diesel Part Number: 661020
We have developed a heavy duty LBZ-LMM Duramax cold side intercooler tube that replaces the factory tube. From the factory, GM uses a tube with plastic quick connect ends and a light duty intercooler connector. Our tube uses CNC machines billet connectors on each end and a heavy duty 5 ply custom ma..
$289.00

Brand: Wehrli Custom Fabrication Part Number: WCF100341SD
Scratch or Dented Item (Pictured); Price Reduced LLY/LBZ/LMM 3.5" Intake Horn for VGT Turbo. Does not have PCV provisions or resonator box provisions. Includes:3-1/2" Intake Horn O-Ring Powder CoatingWCFAB part number: WCF100341 NOTE: ONLY fits with a WCFab 3" y-bridge kit or WCFAB Bas..
$208.55 $208.55

Brand: Pusher Part Number: PGD0610YB
Properly guides air into each cylinder head while tremendously increasing air flow.Compatible and highly recommended with the Pusher Max Compound Turbo System.Flow bench tested and proven to produce 45% more air over the OEM parts when subjected to the same inlet boost pressure (independently tested..
$499.99

Brand: Edge Products Part Number: 28142
The all-new Edge Jammer Cold Air Intake is designed to optimize your truck's performance and pairs perfectly with all of our tuning products!Introducing Edge’s all-new Jammer Cold Air Intake (CAI) systems.  The Jammer CAIs revolutionary design improves airflow by blocking hot air and using cooler, d..
$425.95 $425.95

Brand: AFE Part Number: 10-10101
Constructed with 100% polyurethane on top and base, this high-flow, oiled OE replacement performance filter will outflow the stock paper filter by up to 17% for improved horsepower and torque. The PRO 5R air filter uses five layers of progressively finer mesh cotton gauze media to provide maximum ai..
$78.00

Brand: Pusher Part Number: PGD0610BT
The Pusher Max Passenger-Side Charge Tube is the ultimate solution to improving air delivery to your factory two-piece intake bridge. Unlike other options on the market the Pusher Max charge tube properly supports the intake bridge, preventing any separation and subsequent boost leaks.Our charge tub..
$349.99

Brand: Injen Part Number: EVO7002
The Injen Evolution Air Induction System for your 2006-2007 GM 6.6L Duramax LBZ is a dyno tuned intake system that's designed to enhance air flow for maximum horsepower and torque gains on your truck. Designed using the latest CAD software, the Rotomolded, cross-linked polyethylene construction allo..
$299.95

Brand: Banks Power Part Number: 42142-D
The Banks Ram-Air Intake System delivers exceptional airflow and air density. Its large cotton gauze air filter requires fewer cleanings than competitive filters (stock's small paper filter is not reusable). With its giant 7-1/8" outlet, streamlined components and enclosed cold-air box that keeps ho..
$429.00 $429.00

Brand: XDP Diesel Part Number: XD184
The XDP Billet Turbo Resonator Delete Plug XD184 for your 2004.5-2010 GM 6.6L Duramax allows you to clean up the under-hood of your truck by removing the factory turbo resonator. Made from billet aluminum, the XDP resonator delete features an anodized black finish and a built-in o-ring seal.     F..
$22.95

Showing 1 to 27 of 27 (1 Pages)