-80x80.webp)
92-00 GM 6.5L DieselSite Wicked Wheel 2
$159.00
- Part Number: WW65
- Est. Ship Time: Usually Ships By Next Business Day
SSL SECURE
TRANSACTION
AUTHENTIC
PRODUCTS
GUARANTEED PREMIUM
QUALITY
A+ Rating
More from this brand
Starting From $59.00
Starting From $189.00
Starting From $525.00
Wicked Wheel® 2 for the 1992-2000 6.5L ChevyGreatly Improves Throttle Response
Increased Horsepower
Lower EGTs
Easy Installation - no modifications needed
Increased Boost
Important tip:
It is a left hand thread (reverse thread), meaning you turn the nut to the right to loosen.The Wicked Wheel is balanced at the Factory. Turbo balancing after installation is not necessary.
Our goal with this project was to create a more efficient turbocharger. When we talk about a turbo's maximum recommended boost levels, we base that on the rpms the turbo needs to turn in order to create said boost. When you increase boost without increasing rpms or drive pressure, the load on the turbocharger is the same for the elevated boost as is was for the original lower boost number. The best part is when you run at lower pressures, like you would in daily driving conditions, the drive pressure/ boost pressure ratios are always lower, which should in turn result in longer turbo life, not less. ~ Bob Riley
While capable of high boost numbers with supporting mods these wheels are safe for stock turbo applications!
Part number: WW65
NEW CNC MACHINED BILLET ALUMINUM COMPONENTS - NO MORE MORE CAST ALUMINUM!Also fits Garrett GTP38R Turbos!
It is no secret that the factory boost..
$199.00
This wheel is a 1994 - 2003 Ford PSD 7.3L PSD Performance Billet Compressor Wheel for STOCK GTP38 and TP38 Turbo Applications - Wicked Wheel 2 (WW2) C..
$229.00
INCLUDES OEM GASKETFor use with all stock waterpumps - replaces lower inlet neck on 96-2001 trucks. Will not work on 2002-2003 7.3L trucks.Ford O..
$59.00
New 7.3L Ford Powerstroke water pump with gasket. Fits all 1996 -2003 7.3L engines. All Dieselsite waterpumps come with a lifetime warranty to the ori..
$189.00
This plug replaces the air intake heater for less restriction in your intake.
The '99.5 and up 7.3L Powerstrokes and the 2001-2005 6.6L D..
$19.00
Made from High Speed Alloy Billet Steel. Made to overcome common cracks and fatigue breakage of the stock flex-plates caused by high mileage and ..
$525.00
If you have upgraded your 5R110 (TorqShift) to the 2009 pan and filter, you can use this kit to delete your OEM external filter.
Kit includ..
$150.00
Use Dieselsite 6.0L Head Studs on the following vehicles:2003-2007 Ford F-Series Trucks with 6.0 Liter Powerstroke Diesel Engine2004-2010 Fo..
$499.00
Part 60PIPE03 for 2003 to Early 2004 Discontinued.Contact to Confirm Availability on 60PIPE05Dieselsite 6.0L Passenger Side Bellowed Up-PipesMade wit..
Starting From $179.00
NEW! Enhanced and Improved Standpipe and Dummy Plug Kit by Dieselsite.Each day we get technical calls with customers dealing with high pressure oil is..
$199.00
New 6.7L Ford Powerstroke primary water pump with gasket. Fits all 2011-2016 6.7L engines. All Dieselsite water-pumps come with a lifetime warranty to..
$209.00
Fits: 2011-2019 Ford 6.7L Powerstroke
DIESELSITE's high speed alloy billet steel flex plate's are made to overcome common cracks and fatigue breaka..
$595.00
New 6.7L Ford Powerstroke Secondary water pump with gasket. Fits all 2011-2019 6.7L engines with single alternators. All Dieselsite waterpumps come wi..
$69.00
For use on Dieselsite Overdrive Power Steering Pulley and other common engine pulleysIncludes: Puller Body, Jaw and Sleeve Assembly, Jack-screw, Butto..
$29.00
Wicked Wheel 2 for the 2016-2019 Nissan Titan XD 5.0L Cummins
Now available as a set or individually!
Greatly improves th..
Starting From $129.00
DIESELSITE STAINLESS STEEL BELLOWED CROSSOVER PIPE
*Note* These will not work with manual transmissions right now, but we are working on the ..
Starting From $249.00
New 1992-1999.5 Chevy/GMC 6.5L High Output water pump with gasket. Fits all 1992-1999.5 Chevy/GMC 6.5L diesel engines with Bolt on Pulley.
..
$149.00
Replace the worn turbocharger flange gasket in your vehicle when you install the Mahle G32761 T6 Turbocharger Flange Gasket. Designed as an OEM repla..
$7.23
Universal Externally Wastegated T3 Lava Turbo Blanket. Fits most all T3 turbo exhaust housings and some T4.
Thermal Zero turbo blankets go above ..
$145.00
Universal Externally Wastegated T4 Lava Turbo Blanket. Fits most all T4 turbo exhaust housings and some T5/T6.
Thermal Zero turbo b..
$165.00
Universal T6 turbo blanket. Fits most all T6 turbo exhaust housings including most all Marine applications and Detroit Diesel turbochargers. For mos..
$130.00
Universal Externally Wastegated T6 Lava Turbo Blanket. Fits most all T6 turbo exhaust housings including most all Marine applications of Detroit Dies..
$250.00
Universal External Wastegated T3 Turbo Blanket. Fits most all T3 turbo exhaust housings and some T4.
Thermal Zero turbo blankets go above and bey..
$95.00
Fits most all T4 externally wastegated turbine housings
Thermal Zero turbo blankets go above and beyond when it comes to heat tolerance and durabi..
$105.00
For use on all T4 Flange style exhaust housings found on S300, S400, garrett, holset, precision turbo chargers.
• Easy to install bl..
$135.80
T6 Exhaust Housing Blanket for use with any S500, S400, GT50, GT55, Precision T6 exhaust housings.• Easy to install blanket keeps heat inside the turb..
$150.35
-250x250.webp "4.21\" S400 Compressor Outlet To 3\" Aluminum P1P Flange & Clamp")
4.21" S400 Compressor Outlet To 3" Aluminum P1P Flange & Clamp
P/N: P1S4COALM3..
$68.44
4.21" S400 Compressor Outlet to 3.5" Aluminum P1P Flange & Clamp
P/N: P1S4COALM3.5..
$73.14
P1P T6 S400 5.75" Half Marmon To 5" Mild Steel Exhaust Outlet Flange & Clamp
P/N: P1T6MS5FL..
$53.47
P1P T6 S400 5.75" Half Marmon To 5" Stainless Steel Exhaust Outlet Flange & Clamp
P/N: P1T6SS5FL..
$77.26
-250x250.webp "T4 S400 4.62\" Half Marmon To 4\" Stainless Steel P1P Exhaust Outlet Flange & Clamp")
T4 S400 4.62" Half Marmon To 4" Stainless Steel P1P Exhaust Outlet Flange & Clamp
P/N: P1T4SS4FL..
$67.77
T6 S400 5.75" Half Marmon To 4" Stainless Steel Exhaust Outlet P1P Flange & Clamp
P/N: P1T6SS4FL..
$91.68