Complete Probe kit includes 1/4" dia. Stainless Closed Tip Probe with 10 1/2 ft. wire plus 1/4" compression - 1/8" NPT connector and Heat Shrink for sealing wiring connections. For use with standard Auto Meter Incandescent Lit Pyrometers. Autometer part number: 5249..
This mounting kit allows for mounting all ISSPRO EV2 and PerforMax 2 1/16" gauges with a mounting bracket. Ideally you want your gauges to fit snug in the pod hole for your gauges, but if the hole is too big, or you prefer to have a bracket holding the gauge from the backside, this kit will allow yo..
This boost bolt is great for installation of boost gauges without having to drill and tap your manifold. Simply replace one of your intake manifold bolts for easy access to boost pressures.-Extended length for Cummins 6.7L intake manifold applications. -Stainless steel 5/8" boost bolt tapped for 1/8..
The EAS Temperature Sensor is a -40°F to 300°F 1/8” NPT supplied with the connectors to plug directly into Edge’s Universal Sensor Input System. Using Edge’s Temperature Sensor you can monitor Transmission Temp., Differential/Axle Oil Temp., Oil Temp., Engine Coolant Temp., Air Intake Temp., Pre and..
Includes 3ft. of #4 braided stainless steel line, firewall pass through grommet, 1/8" NPT female right angle to -4AN male fitting, -4AN male to 1/8" NPT male fitting, -4AN male to 1/8" NPT female fitting, 1/8" NPT to 1/4" NPT adapter bushing. Recommended for use with fuel pressure gauges. For use wi..
Autometer Gauge LED Replacement Bulb Kit - GreenFor all Auto Meter gauges (except clocks, Air/Fuel, & Autogage), speedometers, and most in-dash tachometers. Does not work with Digital & LED Lit gauges (i.e. Cobalt, C2, NV, Phantom II, Sport-Comp II, Ultra-Lite II). Upgrade your stan..
Autometer Product # 2385 1/8" NPT. Includes 3/8" NPT and 1/2" NPT adapter fittings. This sending unit is designed for use with Autogage electric temperature gauges only...
This gauge takes the guesswork out of changing your replacement spin on filter for the DIESELSITE External Transmission Filter Kit. It is clearly marked to let you know when it's time to replace the filter.A normal filter condition will be in the green or yellow area. Replace the filter when it app..
Are you in need of a way to access the pressurized intake air system for use with a Boost gauge? This adapter has a hole drilled through it that allows you to remove one of the bolts that affixes the air intake to the cylinder head. Remove the bolt, replace it with the Boost Adapter, and you now hav..
5 Business Days to Ship!For interior mounting of any Auto Meter mechanical pressure gauge. This isolator is rated at 200 PSI working pressure with a maximum of 300 PSI peak. Comes with 4' of braided hose.Compatible with gasoline, diesel, oil, and antifreeze, Cannot be used with alcohol or nitro-meth..
Product # : 2260
1/8" NPT Female fitting weld boss. For installing pyrometer probes, electric transmission and oil temperature gauge senders on applications that do not allow for drill and tap method...
This compact separate module is designed to allow for isolated dimming for all Auto Meter gauges utilizing LED lighting technology separate from your vehicle's OEM dash.
Autometer: 9114..
Features
0-100 PSI Range
Accuracy: 2.5% FS
Large 2.25” dial face for easy viewing
Sure grip rubber shock isolation boot
13.75“ Stainless braided line
Angled chuck enables easy measuring
Mechanical pressure release valve
Rugged carrying case
100 PSI gauge with Auto Meter's signature raci..
1/8" NPT. Replacement for Full Sweep Electric Temperature gauges. Will not work with discontinued Full Sweep Electric Temperature gauges that include black box interface module. Owners of this product should use #2250 instead...
The PPE Diesel Fuel Rail Pressure Gauge Harness 513010100 make installing a PPE Fuel Rail Pressure Gauge into your 2001-2010 GM Duramax LB7/LLY/LBZ/LMM or 2003-2017 Dodge 5.9L/6.7L Cummins a plug and play installation. This harness eliminates the need to cut, splice or modify the stock harness when ..
GlowShift’s Transmission Test Port Extender is specifically designed for the 94-07.5 Dodge Ram. GlowShift’s Transmission Test Port Extender is required when installing any of our transmission temperature gauges into your 1994–2007.5 Dodge Truck. If this extender is not installed, internal transmissi..
Extend the life of your exhaust pressure gauge/sending unit with this handy particle trap kit. Easily servicable, this unit is designed to take all the abuse your hard working truck can put out. Feature Points
This particle trap assembly is designed specifically to collect exhaust contaminants be..
The Edge Accessory System (EAS) was created with future expandability in mind. The architecture of the EAS allows users to connect multiple accessories, daisy-chain style, to the CS and CTS platform. The ability to daisy-chain multiple accessories using the EAS allows users to monitor and display do..
GlowShift’s Fuel Pressure Adapter is specifically designed for the GM Duramax 6.6L Diesel. This adapter replaces the factory bleeder screw with an 1/8npt adapter to easily install your fuel pressure sender. M10 – 1.5 to 1/8npt Thread. GlowShift part number: GS-FA_Duramax..
Will work on 03-2012 5.9L & 6.7L Dodge Cummins, 01+ 6.6L GM Duramax, & 2011+ Ford 6.7L Powerstrokes.ISSPRO EV2 Rail Pressure Sensor Wiring Harness used with all ISSPRO EV2 series Rail Pressure gauges. This is the harness that is included with all EV2 Series Rail Pressure gauges. It is equipped with ..
Edge offers a wide variety of custom dash mounts for various vehicle makes and models. This adaptor allows the CTS2 to fit existing dash pods. New dash pod kits come with the adaptors to fit the CTS and CTS2 products. *COMPATIBLE WITH NEW CS2/CTS2 UNITS. This is compatible with all Edge Dash Pods.
..
Autometer Gauge LED Replacement Bulb Kit - Blue For all Auto Meter gauges (except clocks, Air/Fuel, & Autogage), speedometers, and most in-dash tachometers. Does not work with Digital & LED Lit gauges (i.e. Cobalt, C2, NV, Phantom II, Sport-Comp II, Ultra-Lite II). Upgrade your stan..
This RAM® Heavy Duty Suction Cup Mounting Kit is the best suction cup mount on the market. Bully Dog has partnered with National Products Inc. to bring these truly awesome mounting kits to the GT and WatchDog platforms. The custom T-Slot adaptor is designed to work specifically with the GT or Wa..
LINE, BRAIDED STAINLESS STEEL, #4 DIA., 4FT. LENGTH, -4AN AND 1/8" NPTF FITTINGSIncludes 4ft. of #4 braided stainless steel line, firewall pass through grommet, 1/8" NPT female right angle to -4AN male fitting, -4AN male to 1/8" NPT male fitting, -4AN male to 1/8" NPT female fitting, 1/8" NPT to 1/4..
Autometer Gauge LED Replacement Bulb Kit - Red For all Auto Meter gauges (except clocks, Air/Fuel, & Autogage), speedometers, and most in-dash tachometers. Does not work with Digital & LED Lit gauges (i.e. Cobalt, C2, NV, Phantom II, Sport-Comp II, Ultra-Lite II). Upgrade your stand..
GlowShift’s GPS Speedometer Sensor Kit is the perfect accessory for monitoring your vehicle’s driving speed without requiring an adapter and a lengthy installation process. This GPS speedometer sensor kit features plug and play connectivity that allows for a quick connection to any GlowShift Speedom..
Includes all parts necessary to extend the harness for the GT, WatchDog or PMT by 5'. The extension kit is designed specifically for use with Mirror-Mate™ mounting products.This item will also work on Mini Maxx & Black Maxx Tuners. Kit Includes: · 5' male to female HDMI cable · 5' 20 gau..
Autometer Gauge LED Replacement Bulb Kit - YellowFor all Auto Meter gauges (except clocks, Air/Fuel, & Autogage), speedometers, and most in-dash tachometers. Does not work with Digital & LED Lit gauges (i.e. Cobalt, C2, NV, Phantom II, Sport-Comp II, Ultra-Lite II). Upgrade your standard instrument ..
This RAM® Mirror-MateTM Mounting Kit offers a unique mounting location for the GT or WatchDog. Bully Dog has partnered with National Products Inc. to bring these truly awesome mounting kits to the GT and WatchDog platforms. When installed, the Mirror-Mate mounting option places the GT or WatchDo..
This RAM® Mirror-MateTM Mounting Kit offers a unique mounting location for the GT or WatchDog. Bully Dog has partnered with National Products Inc. to bring these truly awesome mounting kits to the GT and WatchDog platforms. When installed, the Mirror-Mate mounting option places the GT or WatchDo..
This RAM® Mirror-MateTM Mounting Kit offers a unique mounting location for the PMT. Bully Dog has partnered with National Products Inc. to bring these truly awesome mounting kits to the PMT. When installed, the Mirror-Mate mounting option places the PMT just below the rearview mirror for easy ac..
This RAM® Mirror-MateTM Mounting Kit offers a unique mounting location for the PMT. Bully Dog has partnered with National Products Inc. to bring these truly awesome mounting kits to the PMT. When installed, the Mirror-Mate mounting option places the PMT just below the rearview mirror for easy ac..
Tired of the cheap look that 1/8" nylon boost gauge tube gives under the hood of your truck? Do you have a lot of blood, sweat, and tears..and money..wrapped up in your engine and want to make it look like it too? Your existing boost gauge tube kink already? Our custom made Stainless Steel Braided ..
S&S Diesel Motorsport–spec pressure sensors feature a robust Deutsch DTM connector, which is far superior to most on the market. All S&S-spec pressure sensors have a male 1/8th inch NPT pressure port and are available in 0-300 psig, 0-500 psig, and 0-2,000 psig variants...
Mounting performance gauges in cramped vehicle interiors can be challenging. Often this results in compromised placements requiring off-axis instrument viewing by the driver. If unaddressed, this can result in parallax error, the incorrect reading of pointer position relative to dial markings. To en..
Discontinued (8/28/23)The XDP Boost Bolt Adapter is designed to take the hassle out of installing a boost gauge on your Cummins. Rather than drilling and tapping factory components; you can install the Boost Bolt Adapter in place of a factory intake plate bolt. Features:
Reversible, no..
Product Unavailable (Updated 1-5-24)
The XDP Tapped Banjo Bolt has a pre-drilled & tapped 1/8" NPT port to accept a fuel pressure sender or hose. The banjo bolt can be installed in place of your OE banjo bolt on your 98.5-07 injection pump or 94-07 fuel filter canister.
Features:
..