AVP

Brand new performance billet compressor wheel designed to eliminate turbo surge/flutter on the Duramax LB7. The wheel comes pre-balanced and ready to install. It is great for stock and mild upgraded injectors. It's going to give you a quick spool-up for that off the line power and give you more powe..

These billet compressor wheels are much stronger than cast compressor wheels and are designed to flow more air. With a more aggressive blade design and the nose and hub designed to be significantly smaller allowing for larger blade size. The increase of blade surface area allows them to flow more ai..

Brand New HPOP High Pressure Oil Pump Discharge Tube for 2003-2004 6.0L Power Stroke Diesel Engines with the Round HPOP.AVP: 3C3Z-9T288-AA..

DISCONTINUED (6-30-23)These hoses connect the standpipes to the high pressure oil rails, and ONLY fit engines with the early style round high pressure oil rails (ICP sensor at rear of engine under turbo). If your already replacing other parts of the high pressure oil system (ie: Stand Pipes or HPOP)..

Brand new 10 blade turbine wheel and shaft assembly for Ford Power Stroke (2003-04) 6.0L GT37VA Garrett TurbosThis Wheel & Shaft is balanced.These are aftermarket parts designed to fit the early style Garrett GT37VA.AVP: TWGT3703..

15mm 9 Vane Kit for the stock Ford 6.0L Power Stroke Garrett GT3788VA turbo. The 15mm Vanes were found on 2003 and some early 2004 6.0L Power Strokes. You will need to measure the vanes on your turbo to verify that you do have the 15mm Vanes and not the 13.2mm Vanes.AVP: GT37-15..

Heavy Duty EGR Branch Pipe for the 2003-early 2004 Ford 6.0L Power Stroke. They are designed to connect your Round EGR Cooler to the Exhaust Manifold and Up-Pipe. They are designed to work with stock or aftermarket up-pipes (that are designed to retain the EGR) and stock or any direct fit aftermarke..

VGT Solenoid for 2003-2007 Ford Power Stroke 6.0L & Chevy/GMC 2004.5-2017 6.6L Duramax.AVP: VGTS-GT378VA..

The AVP FICM Fuel Injector Harness replaces the wires between the Fuel Injection Control Module (FICM) and the Fuel Injectors. These are built with high quality connectors and wiring to help insure a long reliable life.*Will not fit E-Series Vans or BusAVP: FICMH60..

AVP intercooler piping and boot kit with clamps.Powdercoated black to give your engine bay a stealth look, setting it apart from every other 6.0L.*Installation on dual alternator trucks is very tight but can be done.AVP: INT60KIT-BLK..

AVP intercooler piping and boot kit with clamps.Polished to give your engine bay a shiny clean look, setting it apart from every other 6.0L.*Installation on dual alternator trucks is very tight but can be done.AVP: INT60KIT-PSD..

Heavy Duty UpPipes for the 2003-2007 Ford 6.0L Power Stroke to replace the factory exhaust feed system (exhaust manifold to the turbocharger) which is prone to leakage. The escaping exhaust and heat causes loss of turbo drive pressure and increased EGTs.The Stainless Steel piping sized to maximize t..

This is a new rebuild kit for the stock Ford 6.0L Power Stroke Garrett GT3788VA turbochargers. These kits come with a 360* We recommend upgrading to a billet compressor wheel when rebuilding the turbo so you can get additional performance improvements.These AVP kits designed to fit Garrett GT3788VA ..

Unison for the stock Ford 6.0L Power Stroke Garrett GT3788VA turbo.If you replacing the vanes in your turbo, it is a good ideal to go ahead and change out the Unison Ring as well. Works with either the 13.2mm or 15mm Vanes.AVP: GT37UR..

This kit includes two new high flow fuel banjo bolts as well as 4 new washers.This kit includes two new high flow fuel banjo bolts as well as 4 new washers.The factory 6.0 Banjo bolts have built in check valves that restrict the volume of fuel that flows to your injectors. The factory fuel banjo bol..

The kit includes all of the O-Rings and hard parts to rebuild the fuel pressure housing.The "Blue Spring" Fuel Pressure Regulator Repair Kit is an easy 30 minute install and will increase your fuel pressure back up to where it should be from the factory. Most 6.0's see an increase of 10-12psi of fue..

Services one side, Includes 4 O-Rings and 4 Oil Rail Tubes.Kit for one side with 4 tubes & 4 O-Rings. Works only on the wavey style oil rails. Requires install tool.AVP: ORB60..

The AVP Quick Release Coupler Tool is used in disconnecting the high-pressure oil lines on the 2003-2010 Ford Powerstroke 6.0L & Navistar VT365 diesels.• Fits 2003-2010 Ford 6.0L & Navistar VT365• Quick Release Coupler Tool• Used in disconnecting the high-pressure oil lines.AVP: QRCT60..

This kit comes with the updated turbo oil feed line and drain line. Installation of the Updated Turbo Oil Line Kit you will dramatically improve the flow of oil to and from the turbo on your 6.0L Power Stroke Ford. This update kit is recommended for all Ford Power Stroke 6.0L engines.This Ford kit i..

Replacement Valve Cover Gasket Kit for 2003-10 6.0L Power Stroke Diesel. This kit includes both gaskets so that you will only need to order one to do both sides of the engine.AVP: 3C3Z6584BA..

2004-2010 Ford 6.0L Power Stroke Diesel Updated Dummy Plug & Standpipe Update Kit.2004-2010 Ford 6.0L Power Stroke Diesel Dummy Plug & Standpipe Update Kit. These are the new and improved updated Stand Pipes and Dummy Plugs. The stand pipes have the integrated check valve to help prevent Hig..

Brand new performance billet compressor wheel designed to eliminate turbo surge/flutter on the Duramax LLY. The wheel comes pre-balanced and ready to install. It is great for stock and mild upgraded injectors. It's going to give you a quick spool-up for that off the line power and give you more powe..

This is a new rebuild kit for the HE351CW turbocharger. These turbochargers were popular on Dodge Cummins turbo diesels. Kit is exactly as shown in picture and contains 16 pieces. These are aftermarket parts designed to fit factory turbos.AVP: TRKHE351CW..

Heavy Duty EGR Branch Pipe for the 2004.5-2007 Ford 6.0L Power Stroke. They are designed to connect your Square EGR Cooler to the Exhaust Manifold and Up-Pipe. They are designed to work with stock or aftermarket up-pipes (that are designed to retain the EGR) and stock or any direct fit aftermarket E..

The AVP 6.0 STC HPOP Fitting Update Kit 4C3Z-9B246-F is a New One-Piece High Pressure Oil Connector.The installation of the 6.0 STC HPOP Fitting Update Kit 4C3Z-9B246-F is highly recommended when you're replacing your EGR cooler, installing a EGR delete or oil cooler. It is very highly recommended t..

Unison for the stock Chevy/GMC 6.6L Duramax LLY, LBZ & LMM Garrett GT3788VA turbo. If you replacing the vanes in your turbo, it is a good ideal to go ahead and change out the Unison Ring as well.AVP: GT37UR-D..

Brand new performance billet compressor wheel for the Ford Power Stroke 6.0L GT3788VA Stock Garrett Turbochargers. The wheel comes pre-balanced and ready to install.These billet compressor wheels are much stronger than cast compressor wheels and are designed to flow more air. With a more aggressive ..

Brand new 10 blade turbine wheel and shaft assembly for Ford Power Stroke (2005-07) 6.0L GT37VA Garrett TurbosThis Wheel & Shaft is balanced.These are aftermarket parts designed to fit the late style Garrett GT37VA.AVP: TWGT3705..

13.2mm 9 Vane Kit for the stock Ford 6.0L Power Stroke Garrett GT3788VA turbo. The 13.2mm Vanes were found on late 2004 (and some early 2004) through 2007 6.0L Power Strokes. You will need to measure the vanes on your turbo to verify that you do have the 13.2mm Vanes and not the 15mm Vanes.AVP: ..

Brand new performance billet compressor wheel designed to eliminate turbo surge/flutter on the Duramax LBZ. The wheel comes pre-balanced and ready to install. It is great for stock and mild upgraded injectors. It's going to give you a quick spool-up for that off the line power and give you more powe..

Kit includes the gasket, 2 pigtail harnesses, & 10 heat shrink butt connectors.Valve Cover Gasket Kit with Harness for 2006-2023 5.9L/6.7L Cummins Diesel. This kit includes the gasket, 2 pigtail harnesses (due to the fact that most injector problems can be traced back to the harness pigtails), &..

Brand new performance billet compressor wheel designed to eliminate turbo surge/flutter on the Duramax LMM. The wheel comes pre-balanced and ready to install. It is great for stock and mild upgraded injectors. It's going to give you a quick spool-up for that off the line power and give you more powe..

These are brand new Drop-In Performance HE351VE Turbos that come with the Boost Master Quick Spool 63mm upgraded billet compressor wheel.• Quick Spool Up Response• Low Backpressure• Performance Billet 5+5 Compressor Wheel Installed• 360* Upgraded Bearing Kit• Lower EGTs• No Core ChargeDOES NOT INCLU..

These are brand new Drop-In Stock Replacement HE351VE Turbos.• 360* Upgraded Bearing Kit• No Core ChargeDOES NOT INCLUDE ACTUATOR. Turbo comes with a 1 year warranty. If damage is done due to improper installation or poor care of the product, warranty is void. Warranty's are non-transferable an..

Brand new performance billet compressor wheel kit designed to replace both high pressure and low pressure stock Borg Warner compressor wheels to give your Ford Power Stroke 6.4L more power. The wheel comes pre-balanced and ready to install.These 7x7 billet compressor wheels are lighter and much stro..

This is a Premium Replacement kit and carries a factory 1 Year warranty.• Brand New High Pressure Diesel Fuel Injector Pump Installation Kit• Includes Both High Pressure Fuel Pump To Common Rail Lines (1 Left & 1 Right)• Includes Required Seals, Gaskets, & HardwareAVP: 8C3Z-9G805-B..

Heavy Duty Up-Pipes for the 2008-2010 Ford 6.4L Power Stroke to replace the factory exhaust feed system (exhaust manifold to the turbocharger) which is prone to leakage. The escaping exhaust and heat causes loss of turbo drive pressure and increased EGTs.The Stainless Steel piping sized to maximize ..

Brand new turbine wheel and shaft assembly for Ford Power Stroke 6.4L high pressure turbos (Borg Warner Turbocharger). Turbine Wheel & Shaft is balanced. These are aftermarket parts designed to fit the Borg Warner Turbocharger.AVP: TW64HP..

Brand new turbine wheel and shaft assembly for Ford Power Stroke 6.4L low pressure turbos (Borg Warner Turbocharger). Turbine Wheel & Shaft is balanced. These are aftermarket parts designed to fit the Borg Warner Turbocharger.AVP: TW64LP..

Turbo Mounting Hardware Kit Includes:-Up-pipe to Turbo Gaskets (Qty 2)-Primary Turbo Drain Seal-Secondary Turbo Drain Seal-Turbo Oil Feed Line Seals-Primary to Secondary Turbo Seal-Up-pipe to Turbo Mounting Bolts (Qty 6)AVP: TIK64..

Performance 360* bearing rebuild kits for Borg Warner V2S compound turbochargers. Kit is exactly as shown in picture and contains 37 pieces. It comes with the service kit for both the high pressure and low pressure turbos.AVP: TRK64HL360..

BACKORDERED NO ETA (6-27-23)These are brand new Drop-In Performance Turbos that come with the Boost Master Dual-Scroll Quick Spool upgraded billet compressor wheel and upgraded dual ball bearing design.• Quick Spool Up Response• Low Backpressure• Performance Billet Compressor Wheel Installed• Upgrad..

Brand new performance billet compressor wheel for the Ford Power Stroke 6.7L Stock Garrett Turbochargers. The wheel comes pre-balanced and ready to install.These billet compressor wheels are much stronger than cast compressor wheels and are designed to flow more air. With a more aggressive blade des..

• Easy installation• Easy to view mounting location• Works with Bully Day Watch Dog, Triple Dog & GT Tuner• Works with H&S Performance Black Maxx & Mini Maxx• Clean factory look• Comes painted to match factory color style• Comes with adapter pod for mounting the tuner***If you have a XL ..

Brand new performance billet compressor wheel for the Ford Pickups with Power Stroke 6.7L Stock Turbochargers. The wheel comes pre-balanced and ready to install. The Stage one is great for stock to mild/moderate sized fuel injectors.These billet compressor wheels are much stronger than cast compress..

These are brand new Drop-In stock replacement AVNT3788 Turbos that come with an upgraded dual ball bearing design.*** 2015 & 2016 trucks must change the Pedestal, Coolant Line & Gasket to install (see product options)• Upgraded Ball Bearing Kit• No Core ChargeFit Pickup Trucks only. Will not..

These are brand new Drop-In Performance AVNT3788 Turbos that come with the Boost Master Quick Spool upgraded billet compressor wheel and upgraded dual ball bearing design.*** 2015 & 2016 trucks must change the Pedestal, Coolant Line & Gasket to install (see product options)• Quick Spool Up R..

2003 FORD 6.0L Power Stroke Diesel Standpipe Kit.Updated High Pressure Stand Pipe for the Ford 6.0L Powerstroke Diesel. The AVP updated stand pipes are great for preventative maintenance or fixing high pressure oil problems.These fit all Ford 6.0L Power Strokes made with the round style EGR cooler m..