Ford Powerstoke Cold Air Intake 7.3, 6.0, 6.4, & 6.7L

Fits: 2003-2007 Ford 6.0L PowerstrokeThis Banks 42155-D Ram-Air Intake System with Dry Filter for your 2003-2007 Ford 6.0L Powerstroke Outperforms the rest and flows up to 38% better than stock! The system's dome-shaped dry synthetic filter flows more freely than the factory's highly dense paper fil..

Banks Ram-Air Intake System outperforms the rest and flows up to 38% better than stock! The system's dome-shaped cotton gauze filter flows more freely than the factory's highly dense paper filter, and the contoured, aerodynamic shape eliminates restrictive sharp bends and chokepoints. Designed to wo..

S&B Cold Air Intakes increase cool airflow to your engine while still protecting it from harmful dirt and debris. More airflow has been shown to increase horsepower. S&B Cold Air Intake Kits minimize airflow restrictions while maintaining high filtration (efficiency) ratings to protect your engine.A..

This Cold Air Intake is built to handle the most amount of air volume in the business, utilizing the factory location. A drop-in replacement for the 6.4 Power Stroke and installs in under 30 minutes. Utilizing the AFE ProDryS 5.5 x 12 inch filter, you will not suck in the filter minder or set a..

Enclosed housing keeps out hot, power-robbing engine air; inhales cooler, denser outside air. Improves flow up to 31% for greater power and MPG; helps engine run cooler and cleaner. The giant filter flows more freely than the factory's highly dense paper filter, and the aerodynamic shape eliminates ..

Completely RedesignedS&B's Intake System offers you better protection against engine heat and a fit and finish that is second to none.Improved PerformanceThe one piece air tube is positioned in a clean line with minimum obstructions from the throttle body to the air box. This allows for more air flo..

Banks Ram-Air Superiority. This is no filter-on-a-stick! Ram-Air is an extensively tested and validated cold-air intake with enclosed housing improves flow up to 26 percent. Increases power and fuel economy. Reduces EGTs. Enclosed housing keeps out hot, power-robbing engine air. Inhales cooler dense..

Our all new Stainless Steel Cold Air Intake for 2011-2016 Ford 6.7 Power Stroke Diesel comes preassembled and improves fuel mileage, performance and drivability. This is a complete factory replacement unit, comes fully assembled and installs in minutes. Part numbers: 67PCAIR1116, 67PCAIB1116,..

All New Airbox DesignCompletely redesigned from the original S&B Filters 6.7L Intake for an amazing increase in airflow that is fast and easy to install. The large air filter can easily be installed and removed without having to take out the intake tube.Two Airflow ConfigurationsThe 75-5104D has two..

This intake is designed for a truck more on the mild side, tuned with emissions present. The stage 1, 4.5 inch version will outflow any other intake on the market, as it utilizes the exclusive No Limit 5.5 inch x 9 inch AFE filter options and sizes used with all other intakes we offer, including the..

The No Limit 5 inch intake is by far the most aggressive intake for the 6.7 Power Stroke on the market. Utilizing the custom AFE 5.5 x 12 inch AFE filter, you will not find a bigger, free flowing intake on the market. Will require tuning.Handmade in America, this intake is available with Pro5R, ProD..

Our intakes for the 2017-Present 6.7 are completed and ready to roll! First of its kind, open intake system with 4 inch aluminum from turbo to filter. Includes mass air flow mount, and filter minder port. Not only is this the biggest intake on the market, but offers the biggest filter on the market ..

Fits: 2017-2019The Banks Power 41890 Ram-Air Intake System is the most efficient air intake system on the market for your 2017-2019 Ford 6.7L Powerstroke. Utilizing the stock airbox location, this intake retains the stock battery location while employing the down-facing inlet and factory hood scoop...

This Premium closed box intake fits the 6.7l Powerstroke from 2017-2019 Part numbers: 67PCAIP1719, 67PCAIB1719, 67PCAIR1719..

We are presenting the S&B Cold Air Intake for the 2017-2019 Ford F-Series Super Duty 6.7L Powerstroke Two filter options: -Red Oiled Filter (107 grams) -Dry Filter Why pick the S&B CAI? Improved Airflow over stock intake Has a clear cover to inspect the filter Has a separate battery tray in..

HOW IT WORKSDesigned to work with your stock Ford Powerstroke, the Truck Particle Separator replaces the entire stock intake box, tube & air filter. Most installs can be completed in less than 2 hours with no drilling required. It uses the stock filter minder, so you can quickly and accurately d..

LESS RESTRICTIVE THAN STOCK.We swapped the location of the air intake and battery, allowing our intake to not only be closer but also directly in line with the front air inlet. Additionally, our intake tube has minimal bends as it connects to the turbo inlet. These details result in a significant de..

Airflow Rating Cotton: Flows 42.2% Better than the Stock Intake Dry: Flows 40.5% Better than the Stock Intake Efficiency Rating Cotton: 99.41% Efficient @ 651 CFM (ISO Coarse Dust) Dry: 99.55% Efficient @ 651 CFM (ISO Coarse Dust) S&B Cold Air Intakes increase cool airf..

Tymar Performance Intake The Tymar Performance Intake is one of the most effective combinations of intake volume and filterization. The Tymar Performance intake has 98% initial filtration efficiency and will lower EGT's because it is much less restrictive than the stock intake system. T..

1999-2003 7.3L Powerstroke AFE Stage 2 IntakeReplaces stock battery tray with AFE unit. Gain up to 50HP!Even fits early '99 PSD & Excursions. For install instructions, click here AFE: 54-10192..

Fits: 1999-2003 Ford 7.3L PowerstrokeThis Banks Power 42210-D Ram-Air Intake System with Dry Filter for your 1999-2003 Ford 7.3L Powerstrokes delivers everything you really want out of your Powerstroke: power, agility and fuel economy. It's always been about airflow and with the Ram-Air Intake,..

The all-new Banks Ram-Air Intake for Ford 7.3L Power Strokes delivers everything you really want out of your diesel: power, agility, and fuel economy. It's always been about airflow and with the Ram-Air Intake, it starts right up front. Ram-Air bolts on in minutes and requires zero modification. It'..

The S&B Filters 75-5062 Cold Air Intake Kit for your 1999-2003 Ford 7.3L Powerstroke provides your truck with increased airflow, efficiency and power! This Cold Air Intake system includes an oiled, cleanable air filter built with premium silicone material. Unified DesignAll components in th..

1999-2003 7.3L Powerstroke AFE Stage 2 IntakePro Dry S Filter Media Replaces stock battery tray with AFE unit. Gain up to 50HP!Even fits early '99 PSD & Excursions. For install instructions, click here AFE: 51-10192..

AEM Intake Systems are designed to produce massive horsepower and torque gains as well as better engine sound when used as a replacement for the factory airbox and air filter. AEM intake systems are designed, tuned, and dyno-tested to fit specific cars and trucks. These kits usually include an overs..

This awesome new Stage 2 Sealed intake produces up to 19HP and 114 lbs. x ft. torque, and outflows the factory intake by up to 119%. Fully enclosed in a covered molded plastic housing; this sealed air intake system features a washable/reusable high flow conical "oiled" air filter that provides maxim..

Stage 2 Cold Air Intake System Type Cx with Pro-Dry S Ford Trucks (03-07) V8-6.0L (td) Stg 2 Cx Oil-free 2-layer synthetic media Increased air flow upto 50% for better performance Increases horsepower & torque Improces Fuel economy 99.4% efficient** for excellent protection Wire..

Unique One-Piece High Quality Housing:The simple yet elegant design of the one-piece sealed housing makes installation a snap and features our patent pending filter-to-housing interface. The heat soak resistant material ensures the coolest air intake charge available. A diamond tread plate pattern i..

AIRAID Intake System; Cool Air Dam System Type; w/o Intake Tube; Installs In 30 Minutes;Fits: FORD EXCURSION  2003-2005  V8 6.0L FORD F-250/F-350 SUPER DUTY PICKUP  2003-2007  V8 6.0L Part number: 400-131-1 Click here for install info...

This Cold Air Intake is built to handle the most amount of air volume in the business, utilizing the factory location. A drop-in replacement for the 6.0 Power Stroke and installs in under 30 minutes. The tube runs 5 inches from the filter to the turbo.Details:6.0 Cold Air Intake, BlackAluminum Tube ..

*THIS INTAKE WILL NOT WORK ON TRUCKS THAT DO NOT HAVE A FACTORY MAF SENSOR!*STRENGTH: Sure, we could build our intake out of plastic like everyone else, but aluminum is stronger. For example, aluminum won’t crack like plastic. Plus, unlike plastic, aluminum holds up to the wide temperature extremes ..

Before we put our name on any part we manufacture, it has to beat the competition in 5 ways: Strength; Performance; Simplicity; Durability; and Fit. The Sinister 6.0 cold air intake meets all those requirements, and more. STRENGTH: Sure, we could build our intake out of plastic like everyone else, b..

Applications: 03-07 F-250, F-350, F-450, F-550Features Volant Air Filter Box: Our Cross-Link polyethylene box is engineered to each specific application for low restriction and an increase in air volume. It insulates and protects the filter from engine heat, moisture,..

2003-2007 Ford 6.0 Powerstroke 4" Intake Kit for factory turbo. Includes: 4" Intake Dry Air Filter Outerwear's Pre-Filter Cover Boots & Clamps Powder Coating WCFAB part number: WCF100333 Click here for Wehrli powder coat samples Wehrli Custom Powder Co..

K&N’s lifetime replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. This air filter with air box is designed to replace your existing factory air box and air filter. This replacement air filter and air box are street legal in all 50..

Fits: 2008-2010 Ford 6.4L Powerstroke The AFE Pro 5R Stage 2 Magnum Force Intake System adds power and performance to your 2008-2010 Ford 6.4L Powerstroke. Designed to outflow the factory intake by up to 26%, the magnum force stage 2 intake system is proven to provide gains of up to +13hp &..

AIRAID Cold Air Box Intake System; 400-214-1PDF Install Instructions Fits: FORD F-250 SUPER DUTY PICKUP  2008-2010  V8 6.4L FORD F-350 SUPER DUTY PICKUP  2008-2010  V8 6.4L FORD F-450 SUPER DUTY PICKUP  2008-2010  V8 6.4L FORD F-550 SUPER DUTY PICKUP  2008-2010  V8 6.4L..

AIRAID Cold Air Box Intake System;SynthaMax 401-214-1 The SynthaMax filter media consists of an inner and outer layer of  wire mesh for durable support of filtration media as well as overall filter durability. This filter construction will not deform or collapse under high air flow.  The inner filte..

Enclosed housing keeps out hot, power-robbing engine air; inhales cooler, denser outside air. Improves flow up to 31% for greater power and MPG; helps engine run cooler and cleaner. The giant lifetime filter flows more freely than the factory's highly dense paper filter, and the aerodynamic shape el..

aFe Power Magnum FORCE Stage 2 Intake System; 51-41262 (Replaces 51-71262) The aFe Stage 2 cold air intake produces up to 13HP and up to 36 lbs. x ft. torque while outflowing the factory intake by up to 26%. This intake is a highly engineered heat-shielded air box with a one-piece intake tube. Hand..

The Injen Evolution Air Induction System for your 2008-2010 Ford 6.4L Powerstroke is a dyno tuned intake system that's designed to enhance air flow for maximum horsepower and torque gains on your truck. Designed using the latest CAD software, the Rotomolded, cross-linked polyethylene construction al..

  The 57 Series Generation II air intake, also referred to as an FIPK®, is K&N's ultimate performance product. These performance intakes are designed to increase power by as much as 10%. 57 Series FIPK's are CARB exempt, street legal in all 50 US states, come with a Million Mile Limited ..

AEM Intake Systems are designed to produce massive horsepower and torque gains as well as better engine sound when used as a replacement for the factory airbox and air filter. AEM intake systems are designed, tuned, and dyno-tested to fit specific cars and trucks. These kits usually include an overs..

Fits: 2011-2016 Ford 6.7L Powerstroke The AFE Pro 5R stage 2 Magnum Force Intake System for your 2011-2016 Ford 6.7L Powerstroke is designed to increase power, and performance. This Stage 2 Magnum Force Intake has been tested to outflow the factory intake by 67%, featuring a washable and reusab..

Fits: 2011-2016 Ford 6.7L Powerstroke The AFE Pro S Momentum HD Intake System for your 2011-2016 Ford 6.7L Powerstroke is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every wa..

Fits: 2011-2016 Ford 6.7L Powerstroke The AFE Pro Dry-S Stage Air Intake System for your 2011-2016 Ford 6.7L Powerstroke outflowed the factory intake by 67%. Enclosed in a durable 16 gauge, powder-coated heat shield, this air intake system features a washable/reusable conical air filter with oi..

Features: +26 HP / +80 lbs. x ft. of Torque max gains Outflows factory intake by up to 64% Powder-Coated One Piece Housing utilizes stock mounting locations CAD-Designed Roto-Molded Intake Tube 3-angle filter adaptor increases air velocity No cutting or drilling on OEM parts for faster insta..

Enclosed housing keeps out hot, power-robbing engine air; inhales cooler, denser outside air. Improves flow up to 26% for greater power and MPG; helps engine run cooler and cleaner. The giant lifetime filter flows more freely than the factory's highly dense paper filter, and the aerodynamic shape el..