98.5-07 Dodge Ram 5.9L Cummins PDD Borg Warner Turbos K27 Turbocharger (450HP) - Bundle

Borg Warner Turbos K27 replacement for the Holset HX35W turbocharger.

Borg Warner Turbos K27 turbocharger is capable of supporting diesel trucks up to 450HP. Featuring a 60/83.7mm Forged Milled Wheel (FMW). The 7/7-blade compressor is made to resist low- and high-cycle fatigue. The 70/58.83mm 12 blade Inconel turbine is made for quick response. The turbine wastegate housing is a twin-volute, and an adjustable wastegate actuator is preset at 26 PSI (325hp), which is safe up to 40PSI (450hp) with a Power Driven Diesel Turbo Tuner. Like the Holset, the oil inlet is a threaded M12 and the oil drain is threaded M8.

1998.5-2002.5 Cummins with an HX35W turbocharger, A Cummins 3927811 cast elbow, and a 3903652 v-clamp is needed to use your current downpipe.

1998.5-2002.5 Cummins with an HY35W, A Cummins 3927811 cast elbow, and a 3903652 v-clamp is needed to use your current downpipe. Replacement of the two studs installed into the original turbine inlet flange will also be needed

2003-2007.5 Cummins with either an HY35W, HE351W, or HE351CW a fabricated or adaptor for the compressor discharge and for the turbine discharge are necessary. With a HE351CW turbocharger, a boost fooler, or resistor is also necessary.

• 60/83.7mm Forged Milled Wheel (Compressor)
• 7/7-blade design compressor
• 70/58.83mm 12 Blade Inconel Wheel (Turbine)
• K27 will replace HX35 Part Numbers Below:
o 3538881, 3538882, 3538883, 3538884, 3539009, 3539010, 3539369, 3539371, 3539373, 3539911, 3592202, 3592766, 3597911, 3597912, 3599464, 3802881, 3802882, 4090050

(Does not fit well with industrial (3rd gen) close style exhaust manifold.)

Power Driven Diesel: 10000000003