13-18 Ram 6.7L Cummins 2500/3500 Fleetguard Fuel Filter Kit

-THIS ITEM CANNOT BE EXPEDITED- STANDARD SHIPPING ONLY

Fleetguard fuel filter kit for 2013-2018 Ram 6.7L Cummins PICKUP only.
Will only fit cab & chassis trucks that do not have a fuel tank located at the very back of the truck where a spare tire would normally mount on a standard pickup. 

FUEL FILTER DELETE KIT NOT INCLUDED UNLESS OPTION SELECTED. 

In 2013 Ram went to a two filter setup with the primary fuel/water separator being chassis mounted above and forward of the rear axle and the secondary fuel filter still being up front in the canister on the left side of the engine block. If you buy the recommended brands of filters, you now get better filtration than prior models, however, now the issue is the combined cost of these two filters. These recommended filters cost anywhere between $125-175 to replace at a recommended 15,000 mile interval if you do it yourself. After making many phone calls around the country, dealers are getting upwards of $350 just to change the fuel filters on these trucks. Ridiculous!

We have not only come up with a solution for the high cost, we have also made it very simple for guys that would normally take it into the dealership, to do themselves in under 10 minutes easily saving them a couple hundred dollars every 15,000 miles.

This kit gives you:

• Better than stock filtration for added protection.
• Affordable filter changes can be done without opening the hood!
• Easy installation with no drilling or cutting!
• Completely reversible back to stock.

Why We Put Fleetguard Filters In Our Kits

We developed these kits years ago to give guys the BEST protection they could get for their trucks at an affordable price. We also wanted guys to be able to get filters in there local hometown, rather than buying them from us like other companies do. We had the CAT 1R-0750 filter in our kits for over 10 years, because they are a great filter and are readily available. Now the CAT filters are considered an older filter-media technology compared to the advancement in filtration over the last several years. We have also seen fake knockoffs out there in the marketplace that can cause issues and leave you less protected. Our goal will always be to provide you with the BEST filtration you can get, to protect your high-dollar investment. Introducing the NanoNet technology!

The newer NanoNet technology found in Fleetguard fuel filters is now the most up to date, advanced technology and superior protection you can buy. The result of this Nanonet technology gives it a 2 micron rating at over 99.6% efficiency! Do your own research on these Fleetguard Nanonet filters. For the low cost and the easy availability, you will be pressed to find a better filter out there to protect your truck.

* PLEASE NOTE: These '13-'18 Cummins Filter Kits were designed and manufactured for the 2013-2018 Ram Cummins 6.7 diesel 2500 & 3500 non cab-chassis trucks. This filter kit mounts towards the rear of the truck underneath beside the stock water-separator filter. If your fuel tank is between the frame rails at the very back end where a spare tire would normally mount, this is a cab-chassis style and this kit will not fit. Returns are accepted within 30 days of purchase with a 20% restocking fee and our actual shipping charges taken out. All returns must be approved by phone and in resellable condition which means mounting bracket not scratched, parts clean and the plastic still on the filters.

Install instructions can be found here.
Diesel Fuel Filter Kits part number: 13FLTCummins.

Option- Stock Fuel Filter Delete Kit
Please Note: This kit will completely delete the under-hood fuel filter canister on the side of your block on the 2013.5-2018 trucks (we are finding a lot of the early '13 trucks still have the '12 fuel line setup which will not work with this quick-disconnect hose). What the companies that sell these delete blocks don't tell you when you buy from them, is that once you install the delete block, you than have to go out and have a special hose made up to go from your fuel supply line down on the frame rail up to your CP3 injection pump since you are eliminating the fuel filter housing. These delete blocks only take care of the return fuel back to the tank and the stock WIF sensor. This kit includes both the delete block and the fuel line you need to get the job done. In fact......we can go a step further and say that we are getting 25% more fuel volume up to the injection pump by the size of our hose and quick-disconnect fittings we use compared to the stock parts.

Want to see the easy install instructions before purchasing? Click here!